Shenzhen Future Charger Technology HM16 3 in 1 Fast Wireless Charger User Manual
- June 6, 2024
- Shenzhen Future Charger Technology
Table of Contents
Shenzhen Future Charger Technology HM16 3 in 1 Fast Wireless Charger User
Manual
Please read the instructions before using the product
Parameter specification
Model: HM16
Input voltage/current: 9V/2A
Mobile phone output: 10W(Max)
Earphone output: 5W(Max)
Watch output: 3W(Max)
Charging frequency: 115~148KHz
Efficiency: ≥75%
Product size: L86W113H173mm
Installation
- Plug the power adapter into the socket.
- USB cable (2) connects the power adapter.
- Put (3) connects the USB-C Interface.
- Put the mobile phone which supports wireless charging function on the launch plate correctly. Indicator light changes to green from blue if it starts to charge. The light will be blue if you remove the mobile phone, which means the wireless charging pad enters in a standby mode.
Note: Only the QC2.0/QC3.0 /PD Standard power adapter can support this product’s fast charging. Adapters are not included, they should be bought seperately.
Indicating status and protection function
- LED blue light: Standby
- LED green light: Charging
- Blue light flashing: Mobile phone location in deviation or over temperature protection or trigger FOD
Important notes
- Please remove the protective case (except receiver case) when charging, to keep high efficiency. We suggest you use a 2A adapter for the best results.
- Do not disassemble the charger or throw it into fire and water, to avoid causing a short circuit leakage.
- Do not use wireless charger in severely hot, humid or corrosive environments, to avoid circuit damage and occurs leakage phenomenon.
- Do not place stuff with magnetic strip or chip (ID card, bank cards, etc) on wireless charging pad to avoid magnetic failure.
- Please keep the distance at least 20cm between implantable medical devices (pacemakers, implantable cochlear, etc.) and the wireless charger, to avoid potential interference with the medical device.
- Please take care of the children and ensure they won’t play the wireless charger as a toy, to avoid unnecessary accidents.
- It is better the mobile phones or other related machines don’t set the vibration mode, as the vibration will cause deviation and effect the charging experience.
- Please read the manuals calfully before charging, this product can not be ensured to be compatible with the functions of all the machines.
Warranty
There is one year guarantee for this product unless anthropogenic factor.
Packing List
3 in 1 Fast Wireless Charger
User Manual
Type-c cable
- The involved images are sketch maps, the final product as per the material subjects.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for WPT device:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of device a distance of 15cm
surrounding the device and 20 cm above the top surface of the device must be
respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>