Shenzhen Future Charger Technology HM29 3 In 1 Fast Wireless Charger User Manual

June 5, 2024
Shenzhen Future Charger Technology

Future Charger Technology HM29 3 In 1 Fast Wireless Charger
User Manual

Please read the instructions before using the product

Shenzhen Future Charger Technology HM29 3 In 1 Fast Wireless Charger -
parts

Parameter specification

Model: HM29
Input voltage/current: 9V/2A
Mobile phone output: 15W(Max)
Earphone output: 5W(Max)
Watch output: 3W(Max)
Efficiency: ≥75%
Product size: L118W107H160mm

Installation

  1. Plug the power adapter into the socket.
  2. USB cable 2 connects the power adapter.
  3. Put 3 connects the USB-C Interface.
  4. Put the mobile phone which supports the wireless charging function on the launch plate correctly. The indicator light changes to green from blue if it starts to charge. The light will be blue if you remove the mobile phone, which means the wireless charging pad enters in standby mode.

Shenzhen Future Charger Technology HM29 3 In 1 Fast Wireless Charger -
Installation| Shenzhen Future Charger Technology HM29 3 In 1 Fast Wireless Charger - parts
2
---|---

Indicating status and protection function

  1. LED blue light: Standby
  2. LED green light: Charging
  3. Blue light flashing: Mobile phone location in deviation or over-temperature protection or trigger FODImportant notes

Important notes

  1. Please remove the protective case (except the receiver case) when charging, to keep high efficiency. We suggest you use a 2A adapter for the best results.

  2. Do not disassemble the charger or throw it into fire and water, to avoid causing a short circuit leakage.

  3. Do not use the wireless chargers in severely hot, humid, or corrosive environments, to avoid circuit damage and occurs leakage phenomenon.

  4. Do not place stuff with a magnetic stripe or chip (ID card, bank cards, etc ) on a wireless charging pad to avoid magnetic failure.
    Please keep the distance at least 20cm between implantable medical devices (pacemakers, implantable cochlear, etc.) and the wireless charger, to avoid potential interference with the medical device.

  5. Please take care of the children and ensure they won’t play with the wireless charger as a toy, to avoid unnecessary accidents.

  6. It is better that mobile phones or other related machines don’t set the vibration mode, as the vibration will cause deviation and affect the charging experience.

  7. Please read the manuals carefully before charging, this product can not be ensured to be compatible with the functions of all the machines.

Warranty

There is one year guarantee for this product unless anthropogenic factor.

Packing List
3 in 1 Fast Wireless Charger
User Manual
Type-c cable

  • The involved images are sketch maps, the final product as per the material subjects.

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try  to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm from the radiator of your body:  Use only the supplied antenna.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Shenzhen Future Charger Technology User Manuals

Related Manuals