Montpellier SFO58X Built in Single Fan Oven Stainless Steel Instruction Manual

June 5, 2024
Montpellier

Montpellier SFO58X Built in Single Fan Oven Stainless Steel Instruction Manual
Montpellier SFO58X Built in Single Fan Oven Stainless
Steel

Welcome

Thank you for choosing this Montpellier appliance.

Our appliances have been designed to provide you with the best combination of style, reliability and performance to give you years of trouble-free use.

You may be familiar with a similar product, but please take time to read these instructions carefully before installing or using your appliance to ensure you get the most from your purchase.

We recommend that you keep this manual in a safe place for future reference.

Your appliance is covered by a comprehensive two year Parts & Labour Guarantee. In the unlikely event that you experience a problem with your appliance, you can rest assured that you are fully protected against the cost of repairs for the first 24 months . Please note that any claim must be accompanied by the model reference number, serial number and proof of
purchase.

To activate your guarantee, you will need your product serial number. This can be found inside your appliance.

NB: Please make sure that you keep a copy of your original sales invoice as this will be needed if any service call is required.

There are three ways to register your Guarantee:

  • Online: Visit the Support page on our website and complete the online Product Registration form. www.montpellier-appliances.com
  • By Post: Simply detach and fill in the form provided, attach a stamp and send it in the post. Don’t forget to include your e-mail address so that we can send confirmation through to you.
  • By Phone: Contact our warranty registration department on 0808 1961388
    Guarantee Limit

ACKNOWLEDGMENT

Thank you for purchasing our product. We hope you enjoy using the many features and benefits it provides. Before using this product please study this entire Instruction Manual carefully. Keep this manual in a safe place for future reference. Ensure that other people using the product are familiar with these instructions as well.

WARNING

  • When the oven is first switched on, it may give off an unpleasant smell. This is due to the bonding agent used for the insulating panels within the oven. Please run up the new empty product with the conventional cooking function, 250 ℃, 90 minutes to clean oil
    impurities inside the cavity.

  • During the first use, it is completely normal that there will be a slight smoke and odors. If it does occur, you merely have to wait for the smell to clear before putting food into the oven.

  • Please use the product under the open environment.

  • The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised.

  • If the surface is cracked, switch off the appliance to avoid the possibility of electric shock.

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

  • During use, the appliance becomes very hot. Care should be taken to avoid touching heating elements inside the oven.

  • Do not allow children to go near the oven when it is operating, especially when the grill is on.

  • Ensure that the appliance is switched off before replacing the oven lamp to avoid the possibility of electric shock.

  • The means for disconnection must be incorporated in the fixed wiring in accordance
    with the wiring specifications.

  • Children should be supervised to ensure that they do not play with the appliance.

  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by person responsible for their safety.

  • Accessible parts may become hot during use. Young children should be kept away.

  • An all-pole disconnection means must be incorporated in the fixed wiring in accordance with the wiring rules.

  • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

  • Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass.

  • A steam cleaner is not to be used.

  • The appliances are not intended to be operated by means of an external timer or separate remote-control system.

  • The instructions for ovens that have shelves shall include details indicating the correct installations of the shelves.

SAFETY HINTS

  • Do not use the oven unless you are wearing something on your feet. Do not touch the oven with wet or damp hands or feet.

  • For oven: Oven door should not be opened often during the cooking period.

  • The appliance must be installed by an authorized technician and put into use. The producer is not responsible for any damage that might be caused by defective placement, and installation by unauthorized personnel.

  • When the door of the oven is open do not leave anything on it, you may unbalance your
    appliance or break the door.

  • Some parts of appliance may keep its heat for a long time; it is required to wait for it to cool down before touching the points that are exposed to the heat directly.

  • If you will not be using the appliance for a long time, it is advisable to unplug until required again.

FITTING THE OVEN INTO THE KITCHEN UNIT

Fit the oven into the space provided in the kitchen unit; it may be fitted underneath a work top or into an upright cupboard. Fix the oven in position by screwing into place, using the two fixing holes in the frame. To locate the fixing holes, open the oven door and look inside. To allow adequate ventilation, make sure that the measurements and distances are adhered to when fitting the oven.

IMPORTANT

If the oven is to work properly, the kitchen housing must be suitable. The panels of the kitchen unit that are next to the oven must be made of a heat resistant material. Ensure that the glues of units that are made of veneered wood can withstand temperatures of at least 120 ºC. Plastics or glues that cannot withstand such temperatures will melt and deform the unit, once the oven has been lodged inside the units, electrical parts must be completely insulated. This is a legal safety requirement. All guards must be firmly fixed into place so that it is impossible to remove them without using special tools. Remove the back of the kitchen unit to ensure an adequate current of air circulates around the oven.

DECLARATION OF COMPLIANCE

When you have unpacked the oven, make sure that it has not been damaged in any way. If you have any doubts at all, do not use it: contact a professionally qualified person. Keep packing materials such as plastic bags, polystyrene, or nails out of the reach of children because these are dangerous to children.
Icon

PRODUCT DESCRIPTION

Product Description

Symbol

|

Function description

---|---

  Symbol

| Oven Lamp: Which enables the user to observe the progress of cooking without opening the door. Oven lamp will light for all cooking functions, except ECO function.

Symbol

| Defrost: The circulation of air at room temperature enables quicker thawing of frozen food, (without the use of any heat). It’s a gentle but quick way to speed up the defrosting time and thawing of ready-made dishes and cream filled produce etc.

Symbol

| Bottom heater: Heat is applied only by the bottom of the oven. Use this option for browning the bottom side of the food. This function is suitable for slow cooking recipes or for warming up meals.

Symbol

| Conventional cooking: Heaters from the upper and the lower side uniformly heat the exposed food. Baking and roasting is possible only at single level.

Symbol

| Convention with fan: The top heating element and the bottom heating element are working with fan. The appliance to be cooked is evenly and quickly cooked all around.

Symbol

| Grill-small: This cooking method is normal grilling, utilizing the inner part only of the top heating element, which directs heat downwards onto the food.

Symbol

| Double grill: The inner heating element and the outer heating element in the top of the oven are working. Suitable for grilling larger quantities.

Symbol

| Double grill with fan (at the rear panel): The inner .     element and the outer heating

heating

element in the top of the oven are working with fan. It is suitable for grilling large amount of meat.

Symbol

| Convection: Warm air heated by the rear heater is evenly distributed throughout the oven very fast by means of the fan. This results in a faster and more economical cooking process. The convection allows food to be cooked simultaneously on different shelves.

Symbol

| For energy-saved cooking. Cooking the selected ingredients in a gentle manner, and the heat comes from the top and the bottom.

OPERATION INSTRUCTIONS

When the oven is first connected to the electrical supply, wait for the display automatically show ” 12.30 “, a beep sound once and the ” 12 ” ” . ” flash. Ensure the correct time of the day is set before using the oven. please note: that is 24 hour clock, for example 2PM shown as 14.00.

To set the correct time of day
  1. Press ” + ” ” – ” button to adjust the hour setting.
  2. Press  to confirm the hour setting.
  3. Press ” + ” ” – ” button to adjust the minute setting.
  4. Press  to confirm the minute setting and the timer will be in standby mode.

Note: If the display does not flash, adjust the time of day by pressing the ”

  • ” and ” – ” buttons at the same time for more than 3 seconds.

Oven On and Off

If the timer is in standby mode press for more than 3 seconds, the timer will enter manual mode “ “and the symbol will light up continuously.

  1. Set the desired cooking function and the temperature degree.
  2. Set the time function, then the oven will turn on. If you set Dur or End , after cooking, the oven will automatically turn off. If you set manual or minute minder, after cooking, bring the cooking function and oven temperature knob to ” 0 ” position. Press    and ” + ” buttons for more than 3 seconds to return to standby mode.

Time function setting

In manual mode, pressing can enter the time function setting, the sequence of the function setting is Manual mode – Minute minder-Dur-End-Manual mode. Then selected cooking function and adjust the cook temperature if required.

Manual mode:

In manual mode, only the day’s time and the symbol ” ” lights up. The cooking duration has to be controlled by the user.

Notes: In manual mode, to ensure the oven is not left on accidentally, after 5 hours no any button pressed, the timer will flash once a second to warn you the oven will enter standby mode. After a total of 10 hours, the timer will enter standby mode. When the timer is flashing in manual mode, press any button to reset the timer if you intend to continue using the oven. Or press  ****and ” + ” together for more than 3 seconds to enter standby mode if oven will not be used.

Audible warning time adjustment:

This function can be used to receive audible warning at the completion of the ajusted time period.

  1.   Press ****button to select the minute minder function The relevant “ ” symbol will flash .

  2. Use button to adjust minute minder Refer to the instructions for setting the correct time
    the day. Press  **** button to confirm the  symbol begins to light continuously, the audible warning time adjustment is done.

  3. When the time is up, the timer gives an audible warning and the ”  ” symbol begins to flash on the . it will stop the audible warning and the symbol ”  ” disappears on the screen Audible warning time adjustment is for warning purposes only .
    Press ****and “+ ” together for more than 3 seconds to enter standby mode if oven will not be used .

Semi automatic programming according to cooking period – :

This function is used to cook in the desired time range The food to be cooked are put into the oven , .

The oven is adjustment to the desired cooking function and temperature degree.

The maximum setting of cooking period is 10 hours.

  1. Press ****button until you see Dur on the timer screen Before setting cooking period )
  2. Use ” + ”  button to adjust cooking period for the food you wish to cook Refer to the instructions for  setting the correct time of day. ) , Press **** button to confirm the day ;’s time will  appear on the screen and the symbols A will light on the screen While doing this the . oven will also start to operate
  3. At the completion of the set duration the timer will stop the oven and give an audible warning Also the symbol “A” will begin to flash on the screen After bringing the cooking function and oven temperature knob to position it will stop the audible warning. Pressing ****for more than 3 seconds set the oven to Manual mode again to use the oven.

Semi automatic programming according to finishing time – :

This function is used to cook according to the desired finishing time The food to be cooked is put into the oven The oven is adjusted to the desired cooking function and temperature degree.

  1. Press ****button until you see End on the timer screen Before setting finished time .

  2. Use”+” button to adjust finishing time Refer to the instructions for setting the correct time of day .

  3. Press ” ****” button to confirm, the day ‘s time will appear on the screen and the symbols A will light on the screen While doing this the oven will also start to operate
    Press ” ” button to confirm, the day ‘s time will appear on the screen and

  4. At the completion of the set duration the timer will stop the oven and give an audible warning Also the, symbol A will begin to flash on the screen After bringing the cooking function and oven temperature knob to position Pressing any button less than 3 seconds, it will stop the audible warning.
    Pressing ” ****” for more than 3 seconds set the oven to Manual mode again to use the oven.

Full automatic programming – :

This function is used to cook after a certain period of time with a certain duration, The food to be cooked is put into the oven The oven is adjusted to the desired cooking function. The oven temperature is adjusted to the desired degree depending on the food to be cooked.

First: Press ” ” button until you see ” Dur ” on the timer screen. Use ” + ” ” – ” button to adjust cooking period for the food you wish to cook. Press ” ” button to confirm, the day’s time will appear on the screen and the symbols ” A ” will begin to continuously light on the screen.

Second: keep pressing on ” ” button until you see ” End ” on the timer screen. When you see ” End ” on the timer screen, Use ” + ” ” – ” button to adjust finishing time, Press ” ” button to confirm, the day’s time will appear on the screen and the symbol ” A ” will begin to continuously light on the screen. The symbol “ ” disappears until the time cooking starts.

You can set a time which can be up hours after the time obtained by adding the cooking 23.59 period to the day s time ‘ .

The oven will start operating at the time calculated by deducting the cooking period from the set finishing time and will stop at the set finishing time The timer will give an audible warning and the symbol A will , . ” ” begin to flash After bringing the cooking function and oven temperature to position. . ” 0 ” any button less than 3 seconds, it will stop the audible warning.

Pressing ” ****” for more than 3 seconds set the oven to Manual mode again to use the oven.
Please note Once setting full:-automatic mode all the, time can not be changed Change. time means cancel automatic pregame and enter into corresponding mode If you need to reset automatic mode, need to stop setting the current mode to set the automatic mode according to the above steps again.

Specification

  1.  When setting the date of each function, long press on ” + ” or ” – ” for more than 3 seconds, the date will progressively and rapidly increase or decrease.
  2. When setting each of the time function, if there is none operation for 5 minutes then it will return to manual mode.
  3. When setting each of the time function, pressing on for more than 3 seconds can cancel current setting and enter manual mode.
  4. During time function setting, pressing on ” + ” and for more than 3 seconds , a beep sounds it can cancel the current time function setting and enter standby mode.
  5. We suggest that you run the oven elements for 15 minutes at 200 degrees to burn off any residue from their surfaces.

ACCESSORIES

Wire shelf : For grill, dishes, cake pan with items for roasting and grilling.
ACCESSORIES

Universal pan: For cooking large quantities of food such as moist cakes, pastries, frozen food etc, or for collecting fat/spillage and meat juices when placed under the wire shelf.
ACCESSORIES

SHELF PLACEMENT WARNING

To ensure the oven shelves operate safely, correct placement of the shelves between the side rail is imperative. Shelves and the pan only can be used between the first and fifth layers.

The shelves should be used with the right direction, it will ensure that during careful removal of the shelf or tray, hot food items should not slide out.
SHELF PLACEMENT

BULB REPLACEMENT

For replacement, process as follows:

  1. Disconnect power from the mains outlet or switch off the circuit breaker of the unit’s mains outlet.
  2. Unscrew the glass lamp cover by turning it counter-clockwise (note, it may be stiff) and replace the bulb with a new one of the same type.
  3. Screw the glass lamp cover back in place.
    NOTE: Only use 25W/2 0V, T300°C halogen lamps.
    BULB REPLACEMENT
SECURING THE OVEN TO THE CABINET
  1. Fit oven into the cabinet recess.
  2. Open the oven door.
  3. Secure the oven to the kitchen cabinet with two distance holders ” A ” which fit the holes in the oven frame and fit the two screws ” B “.
    SECURING THE OVEN TO THE CABINET

VENTILATING OPENINGS

When cooking is finished or in pause state or in waiting state, if the oven’s center temperature is over 75 degree, the cooling fan will continue working for 15 minutes. Or when the oven’s center temperature becomes lower than 75 degree, the cooling fan will stop in advance.
VENTILATING OPENINGS

CONNECTION OF THE OVEN

Your oven is supplied with a pre-fitted cable. It is recommended that a 13Amp Plug is fitted and the appliance is plugged in to a standard switched 13amp outlet socket. Alternatively it can be hard wired in to a 13amp fused spur. The socket or fused spur must be accessible after the appliance has been installed.
CONNECTION OF THE OVEN

INSTALLATION

INSTALLATION

Remark:

  1. Only plus deviations are admissible for all dimension.
  2. The cabinet should not include the power switch or socket.

NOTE: The number of accessories included depends on the particular appliance purchased.

REMOVING THE DOOR FROM OVEN (OPTIONAL)

Removable door allows full access to entire interior of the oven for easier and quicker maintenance.

  1. To remove the door, open the door to the maximum angle.
    Then pull the buckle at the door hinge backward. (Figure 1)
    REMOVING THE DOOR

  2. Close the door to an angle approximately 15°. Lift up and slowly pull the door out from the oven. (Figure 2)
    REMOVING THE DOOR

  3. When maintenance is completed, reverse the above procedures to return the door to its original position.

Recipes for ECO mode

Recipes| Temperature (C°)| Level| Time (min)| Pre- heat
---|---|---|---|---
Potato Cheese Gratin| 180| 1| 90-100| No
Cheese Cake| 160| 1| 100-150| No
Meatloaf| 190| 1| 110-130| No

CLEANING AND MAINTENANCE

For the sake of a good appearance and reliability, keep the unit clean. The modern design of the unit facilitates maintenance to a minimum. The parts of the unit which come into contact with food have to be cleaned regularly.

  • Before any maintenance and cleaning, disconnect the power.
  • Set all controls in the OFF position.
  • Wait until the inside of the unit is not hot but only slightly warm- cleaning is easier when warm.
  • Clean the surface of the unit with a damp cloth, soft brush or fine sponge and then wipe dry.
  • In case of heavy soiling, use hot water with non- abrasive cleaning product.
  • For cleaning the glass of the oven door, do not use abrasive cleaners or sharp metal scrapers, these can scratch the surface or lead to the glass being damaged.
  • Never leave acidic substances (lemon juice, vinegar) on stainless steel parts.
  • Do not use a high pressure cleaner for cleaning the unit. The baking pans may be washed in mild detergent.

This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment(WEEE).

By ensuring this product is disposed correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The symbol on the product indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal.

For more detailed information about treatment, recovery and recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Here For You

After-sales assistance

If you continue to experience problems with your appliance, please call the Montpellier customer service helpline on: 01759 487839

Please have all your product details available, including the model number, serial number, original sales invoice (clearly showing model number,date of purchase and your retailer’s details) before registering a fault.

The service call cannot progress without this information.

Your 2 year Manufacturer’s guarantee

THIS DOES NOT AFFECT YOUR STATUTORY RIGHTS.

Your new Montpellier appliance carries a free guarantee which protects you against the

cost of repairs during the first 24months from date of purchase provided that:

Any claim is accompanied by evidence of the model reference, model serial number and proof of purchase, such as a Sales Receipt, showing that the appliance was purchased within the 24 months prior to the date of claim.

What is not covered under the Guarantee

  • Any appliance not correctly installed and operated in accordance with the manufacturer’s instructions

  • Any appliance that is used for anything other than domestic purposes.
    Any defect caused by accident, misuse, unauthorized modification or inexpert repair.

  • Cost of Call-out where a fault cannot be found with the appliance.
    Cost of Call-out for work covering routine maintenance, such as, but not exclusively, cleaning of filters or defrosting.

  • Cost of Call-out for work required to correct the alignment of doors following door reversal procedures carried out by you.
    Use of the appliance by anyone other than the Householder.
    Use in any commercial environment.

  • Consumable items, such as, but not exclusively, fuses in plugs, bulbs and breakable items which require routine replacement.
    Repair costs incurred that have not been authorised by Montpellier service and/or carried out by a non ­approved Montpellier engineer.

  • Montpellier Appliances do not accept claims for consequential loss, rusting, corroding, delivery damage or scratches.

YOUR GUARANTEE IS VALID ONLY IN THE UK.

To register your appliance simply complete the card in your appliance pack and return it with a stamp affixed or alternatively you can register on line at www.montpellier-appliances.com/support

SERVICE HELP-LINE

Should your appliance develop a fault, please call the Montpellier customer service helpline on:

01759 487839

Please remember to have all your product details available, including the model number, serial number, date of purchase and your retailer’s details before registering a fault.

Montpellier Domestic Appliances Ltd.
Unit 1, Tewkesbury Retail Park, Northway Lane,
Tewkesbury, Gloucestershire GL20 8JU

www.montpellier-appliances.com

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city o , your household waste disposal service or the shop where you purchased the product.

Montpellier logo

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Montpellier User Manuals

Related Manuals