WASSERSTEIN Arlo Bulb Socket with USB Port User Manual
- June 10, 2024
- WASSERSTEIN
Table of Contents
WASSERSTEIN Arlo Bulb Socket with USB Port
In the Box
Introduction to Parts
Installation
-
Turn off the light switch and take out the original bulb.
Caution: The bulb might be hot. -
Screw your bulb into the Wasserstein Bulb socket.
-
Connect one end of the USB cable into your camera, and the other end into the USB port on the bulb socket.
For Blink Outdoor For Ario Ultra, Ultra2, Pro 3/4 -
Turn on the bulb switch.
Note: The USB port will stay on continuously.
Frequently Asked Questions
Can I use this product to power other devices?
Yes, you can connect any device that is compatible with the USB cable. Be sure
to check device electricity requirements and appropriate cable length.
Specifications
- Model: WLS01
- Base type: E26
- Input: 120 V~S0/60 Hz
- USB output: 5V, 2.4A
- Power: 30Wmax
- Socket size: 2.5 X 2.7 X 2.3 in
- USB port: 1 (USB-A)
Get More Support
Scan the OR code below or email us at: contact@wasserstein- home.com
Camera is not included.
Bulb is not included.
Wasserstein is a trademark of Dropcases Ltd.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>