iHealth BPM1 Clear Blood Pressure Monitor User Manual

iHealth BPM1 Clear Blood Pressure Monitor

MODEL: BPM1
QUICK START GUIDE

Measurement

Fully charge the blood pressure monitor before first use

1. Rest your bare (or thinly clothed) left arm flat on a table.

2. Place cuff over left arm so the cuff tubing is centered on the inside of your arm and aligned with your middle finger.

Note the direction of the cuff tubing and alignment with your middle finger.

3. The bottom of the cuff should be about 1/2″ above your elbow. Tighten the cuff firmly, leaving about 1 finger space.

4. Insert cuff tubing connector into blood pressure monitor unit, and the monitor will power on automatically.

Make sure to fully insert the cuff tubing connector into the blood pressure monitor.

5. You will need to select your language after turning on the monitor for the first time.

6. Press User 1 or User 2 button again to start a measurement. Press any button to stop a measurement and to turn off the monitor.

During the measurement, you will feel the cuff tightening around your arm. Remain still and do not move your arm until the measurement is complete.

Wireless Network Setup

1. Go to the Apple App Store or Google Play Store and search “iHealth MyVitals.” Download the app and then log in.

2. Press and hold the User 2 button for 10 seconds until the screen displays the select language page.

3. The screen will display the wireless network setup page. Launch the iHealth MyVitals app, go to Select New Devices and choose Clear (BPM1). Follow the on-screen instructions to finish setting up your wireless network.

Setup complete! Your blood pressure measurements will automatically upload to the iHealth MyVitals app.

Device Compatibility

Apple iOS devices (requires iOS version 8.0 or higher)

• iPhone 7/7 Plus
• iPhone 6S/6S Plus
• iPhone 6/6 Plus
• iPhone 5S/5C
• iPhone 5
• iPhone 4S
• iPad Air 2
• iPad Air
• iPad Mini 3
• iPad Mini 2
• iPad Mini
• iPad Pro
• iPad 4th Gen
• iPad 3rd Gen
• IPod Touch 6th Gen
• iPod Touch 5th Gen

Android devices (requires operating system 4.0 or later)

• Samsung Galaxy S7/S7 Edge

• Samsung Galaxy S6/S6 Edge

• Samsung Galaxy S5

• Samsung Galaxy S4

• Samsung Galaxy Note3

• HTC One M7

• LG Nexus 4

• LG Nexus 5

• Motorola Nexus 6

DOWNLOAD

iHealth BPM1 Clear Blood Pressure Monitor:

Quick Start Guide – [Download PDF]

Owner’s Guide – [Download PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>