Neomounts PLASMA-W200 TV Wall Mount Specifications and Datasheet
- June 10, 2024
- Neomounts
Table of Contents
Neomounts PLASMA-W200 TV Wall Mount
SPECIFICATIONS
GENERAL
- **Min. screen size*** 37 inch
- **Max. screen size*** 85 inch
- Max. weight 100 kg (per screen)
- Screens 1
- VESA minimum 200×200 mm
- VESA maximum 865×480 mm
- Distance to wall 7 cm
FUNCTIONALITY
- Type Tilt
- Tilt (degrees) 30°
- Adjustment type None
- Lockable – Lock not included
INFORMATION
- Color Silver
- Main material Steel
- Warranty 5 year
- EAN code 8717371440596
Please note: The inch sizes stated are just an indication, combined with the weight and VESA sizes. The maximum weight and VESA size are absolute restrictions for the products and should not be exceeded.
Description
Neomounts by Newstar TV/Monitor Wall Mount (tiltable) for 37″-85″ Screen – Silve
The Neomounts by Newstar wall mount, model PLASMA-W200 is a tiltable wall mount for flat screens up to 85″ (216 cm). This mount is a great choice when you want the ultimate viewing flexibility with your flat screen. The depth of this mount is 7 centimeters.
Neomounts by Newstars’ tilt (30°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The depth of this mount is 7 centimeters. Neomounts by Newstar PLASMA-W200 is suitable for screens up to 85″ (216 cm). The weight capacity of this product is 100 kg for each screen. The wall mount is suitable for screens that meet VESA hole patterns 200×200 to 865x480mm. Different hole patterns can be covered using Neomounts by Newstar VESA adapter plates. Create a clean design ambiance for your flat-screen TV in the living room, bedroom, or home cinema.
All installation material is included with the product.
Dimensions
PLASMA-W200 NEOMOUNTS BY NEWSTAR TV WALL MOUNT
FAQ’s
The Neomounts PLASMA-W200 TV Wall Mount has how many parts?****
Four components make up a full-motion Neomounts PLASMA-W200 TV Wall Mount: a wall plate, brackets, an articulating arm, and a TV plate.
What to think about before mounting a TV with the Neomounts PLASMA-W200?****
When Neomounts PLASMA-W200 mounting a television, the strength of your wall should be your top priority. Even the newest, lightest televisions weigh considerably more than your largest framed artwork. As a result, the position you select will require one or more studs to anchor the screws.
What occurs when television is positioned too high?****
It’s crucial to choose the proper height for your TV mount because watching TV at the wrong height might make it uncomfortable for your neck and eyes.
Where should I put my TV with the Neomounts PLASMA-W200?****
Don’t Plasma-W200 Neomounts mount a TV above a fireplace. because heat is the enemy of all electronics, in addition to the reasons mentioned above. Mounting a TV over your fireplace is almost always too high for you to watch from a couch, even if you never use it.
How many persons are required to mount a television?****
While smaller TVs can be carried and lifted by one person, anything larger than 50 inches requires the assistance of two persons. Even though the TV’s weight is reasonable for one person to hoist, its size and form make it difficult to maneuver, and care must be given to avoid scratching the screen.
What kinds of TV mounts are there?****
The many mount types include fixed, tilting or swiveling, and full motion. There is no superior style—it all depends on how your room is organized, where you want to hang the TV, and where you plan to sit.
Which wall may the TV be mounted on using a Neomounts PLASMA-W200?****
The majority of TV mounts work with drywall and conventional wood-stud framing, but you could need a specialized mount if you’re hanging your TV on a wall made of plaster, concrete, or brick. On the back of almost all TVs, there are four mounting holes set up in the typical VESA pattern.
How can you tell if your television is installed correctly?****
Measure the distance between the vertical and horizontal center lines of the hole pattern on the back of the TV to see if it complies with VESA standards. This measurement needs to fit inside one of the parameters listed above. The picture below shows how the holes on the back of your TV or monitor could appear.
What level ought a TV to be mounted at?****
The middle of your TV, while seated, is advised to be at eye level by experts. The distance from the floor to the middle of your TV is equal to around 42 inches.
How much time can a plasma TV be flat?****
If necessary, you can place your Plasma TV flat for a short period of time on a cushioned surface. Long-term flat-laying of the TV can result in damage like a broken screen component. Keep in mind that you should never transport your Plasma TV face down or lying flat.
Can you place a TV anywhere?****
Flatscreen Televisions can be mounted in a fixed, tilting, or full-motion manner on any wall. Although it’s usually preferable to attach to solid studs, most TVs can still be mounted to hollow walls behind plasterboard.
Can a plasma TV be hung?****
The most popular plasma TV mounting option for use in homes or businesses is flat wall installation. The plasma monitor can stay the closest to the wall with the cheapest option, which also adds only a couple of inches to the depth.
Do plasma TVs weigh too much to mount?****
No, brackets are available for TVs of every size and weight. Nevertheless, the wall on which you intend to put your TV might not be sturdy enough to support it.
Can a plasma TV be mounted on a wall?****
A simple approach to maximize space in your home and give it a more upscale appearance is to mount a plasma TV on the wall. Moreover, it’s an excellent technique to prevent unintentionally toppling the screen when cleaning behind it.
How can I tell if my wall is sturdy enough to support a television?****
The weight won’t be an issue as long as you install the TV mount’s bolts into the wall studs or, if it’s brick, into a security hole in the brick. It won’t be very secure if the screws are only driven into the plasterboard.
Download this PDF Link:Neomounts PLASMA-W200 TV Wall Mount Specifications and Datasheet