DELOCK 11476 DisplayPort 1.4 KVM Switch User Manual
- May 15, 2024
- DeLOCK
Table of Contents
- DELOCK 11476 DisplayPort 1.4 KVM Switch
- Product Description
- Usage Instructions
- FAQ
- Description
- Specification
- Package content
- Safety instructions
- Hardware Installation
- Operation
- Hotkey Summary
- Declaration of conformity
- WEEE-notice
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DELOCK 11476 DisplayPort 1.4 KVM Switch
Specifications:
- Product Name: DisplayPort 1.4 KVM Switch
- Product Number: 11476
- User Manual Number: 11476-a
- Website: www.delock.com
Product Description
This KVM switch by Delock is designed to connect two computers with DisplayPort output to a DisplayPort monitor. It features a selector button and hotkey support for easy switching between the connected computers. In addition, it provides two USB 2.0 ports for a mouse and keyboard, and two USB 3.2 ports for a hard drive or USB memory. The KVM switch supports Multi-Stream Transport (MST), allowing the use of multiple monitors through an optional MST hub.
Usage Instructions
Connecting the KVM Switch:
- Connect the DisplayPort outputs of your computers to the DisplayPort input of the KVM switch.
- Connect your DisplayPort monitor to the DisplayPort output of the KVM switch.
- Connect a USB keyboard and mouse to the USB 2.0 ports on the KVM switch.
- Connect a USB hard drive or memory to the USB 3.2 ports on the KVM switch.
- Ensure that the source PCs are DisplayPort MST compliant if using multiple monitors.
Operation
Port Selection:
Use the selector button to switch between CPU ports. The LED indicators will show the active port.
Hotkey Support:
Use hotkeys on a USB keyboard plugged into the front port with a keyboard logo to switch between computers and perform other functions.
Hotkey Functions:
Refer to the manual for specific hotkey combinations to perform tasks like channel selection, USB Hub selection, audio selection, and enabling/disabling functions like buzzer and Auto-Scan.
FAQ
Q: Can I use this KVM switch with computers that have HDMI output?
A: No, this KVM switch is designed specifically for computers with DisplayPort output.
Q: How do I reset the KVM switch to factory settings?
A: Press and hold the reset button on the KVM switch for 10 seconds to restore it to factory settings.
Product-No: 11476
User manual no: 11476-a
www.delock.com
Description
This KVM switch by Delock is a convenient solution for connecting two computers with DisplayPort output to a DisplayPort monitor. By using the button or a hotkey you can switch between both computers. Furthermore, two USB 2.0 ports for a mouse and keyboard, and two USB 3.2 ports for a hard drive or USB memory can be connected. With the support of MST (Multi-Stream Transport), multiple monitors can be used at the DisplayPort output with an optional MST hub.
Note
MST (Multi-Stream Transport) requires either monitors that are capable of
DisplayPort daisy-chaining, or use of a powered DisplayPort MST Hub. The PC
source must be DisplayPort MST compliant.
Specification
- Connectors:
- Input:
- 2 x DisplayPort female
- 2 x SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) Type-B female
- 2 x 3.5 mm 3 pin stereo jack female (audio)
- 1 x DC 5 V power connector
- Output:
- 1 x DisplayPort female
- 2 x SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) Type-A female (USB Hub)
- 2 x USB 2.0 Type-A female (keyboard + mouse)
- 1 x 3.5 mm 3 pin stereo jack female (audio)
- 1 x 3.5 mm 4 pin stereo jack female (selector)
- Switch button with 2-colour LED indicator for source
- Switching via button or hotkey
- Automatic switching when turning a PC on or off
- Independent switching of source, audio and USB hub
- 2 x SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) Type-A female – Battery Charging specification BC1.2
- Data transfer rate up to SuperSpeed USB 5 Gbps
- DisplayPort 1.4 specification
- Supports Display Stream Compression 1.2 (DSC)
- Supports HDR
- Supports HDCP 1.4 and 2.2
- Resolution up to:
- Display with DSC support:
- 7680 x 4320 @ 60 Hz
- 3840 x 2160 @ 144 Hz
- Display without DSC support:
- 7680 x 4320 @ 30 Hz
- 3840 x 2160 @ 120 Hz
- (depending on the system and the connected hardware)
- DisplayPort output supports Dual Mode DP++
- Supports MST (Multi-Stream Transport)
- Robust metal housing
- Colour: black
- Dimensions (LxWxH): ca. 170 x 74 x 30 mm
Power supply specification
- Wall power supply
- Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.8 A
- Output: 5.0 V / 4.0 A / 20.0 W
- Ground outside, plus inside
- Dimensions:
- inside: ø ca. 2.1 mm
- outside: ø ca. 5.5 mm
System requirements
- PC with DisplayPort female + USB Type-A female
- Monitor or TV with DisplayPort connector
Package content
- KVM switch with USB and audio
- 2 x cable USB 3.2 A male to USB 3.2 B male, length ca. 1.5 m
- 2 x cable DisplayPort male to DisplayPort male, length ca. 1.5 m
- 2 x cable 3.5 mm stereo jack male to 3.5 mm stereo jack male, length ca. 1.5 m
- 1 x selector with cable, length ca. 1.8 m
- External power supply
- User manual
Safety instructions
- Protect the product against moisture
- Protect the product against direct sunlight
Hardware Installation
- Connect a USB keyboard and mouse to the console ports of the KVM.
- Connect the selector pushbutton to the front port of the KVM.
- Connect all audio cables to each computer, the KVM, and speakers if necessary.
- Connect other USB devices to the USB Hub if necessary.
- Connect the DisplayPort monitor to the DisplayPort output of the KVM.
- Connect the included DC 5V power adapter to the DC port of the KVM.
- Connect the DisplayPort cable between the DisplayPort output of the computer and the DisplayPort input of the KVM.
- Connect the USB cable to the USB-A port of the computer and to the USB-B upstream port of the KVM.
- Turn on the computer and make sure that the USB ports are enabled and working properly.
Note
This KVM Switch supports USB plug & play; all the components can be added and
removed at any time without the need to shut down the unit. However, it will
take several seconds to enumerate the USB devices; the time depends on the
number of USB devices and the speed of the computer.
Operation
Port Selection
Press the selector button to switch between CPU ports. The button LED
indicates the port: white (CPU1) or green (CPU2). The orange LED on the KVM
top also indicates the active host port.
Hotkey Support
The hotkey function is working with a USB keyboard which is plugged in at the
front port marked with a keyboard logo. There is no hotkey support for a USB
keyboard plugged into the USB Hub downstream ports of the KVM.
You can select the computer you want to control with the following hot keys.
Channel selection
Press [Ctrl] + [Ctrl] + Enter to switch all channels (PC + USB Hub + Audio) to
the next port
Press [Ctrl] + [Ctrl] + [D] + Enter to switch the DP channel (PC only) to the
next port
USB Hub Selection
Press [Ctrl] + [Ctrl] + [Z] + Enter to switch the USB hub to the next port.
Audio Selection
Press [Ctrl] + [Ctrl] + [A] + Enter to switch Audio to the next port.
Host USB Power on detect Function
Press [Ctrl] + [Ctrl] + [P] + [W] + [1] to enable port switching by Host USB
Power on detect. (Default)
Press [Ctrl] + [Ctrl] + [P] + [W] + [0] to disable Host USB Power on detect.
Auto-Scan Function
Press [Ctrl] + [Ctrl] + [S] + Enter to activate the Auto-Scan function; the
KVM will cycle through the 2 display ports sequentially.
Press [Ctrl] + [Ctrl] + [S] + [n] + Enter to adjust the time interval during
Auto-Scan, where [n] can be 5 ~ 999. Press any other key on the keyboard to
turn off the Auto-Scan function.
Buzzer Function
Press [Ctrl] + [Ctrl] + [B] + [1] to enable the buzzer function. (Default)
Press [Ctrl] + [Ctrl] + [B] + [0] to disable the buzzer function.
The buzzer sound:
- (a) activate leading hotkey beeps once;
- (b) accomplish setting hotkey and Enter beeps once;
- (c) error hotkey beeps once and quit;
- (d) only press leading hotkey in a few seconds without further step beeps once and quit.
Hotkey Summary
Step 1 | Step 2 | Action |
---|---|---|
Ctrl | Ctrl | Enter |
Ctrl | Ctrl | [A]+Enter |
Ctrl | Ctrl | [Z]+Enter |
Ctrl | Ctrl | [D]+Enter |
Ctrl | Ctrl | [P]+[W]+[ 1/0] |
Ctrl | Ctrl | [S]+Enter |
Ctrl | Ctrl | [S]+[n]+Enter |
sec
Ctrl| Ctrl| [B]+[1/0]| Enable / Disable buzzer
The two-step hotkey sequence is used for quick function execution. The leading
key (Step 1) is [Ctrl] + [Ctrl] by default. However, you may change the
leading hotkey if you want, by pressing [Ctrl] twice, [H] + mode A or B (see
below), then pressing Enter. The available leading hotkey modes are shown
below.
Set leading hotkey to mode A (for Mac keyboard only):
Press and hold [Command] + [F12] + [F12] + release [Command] Set leading
hotkey to mode B:
[Ctrl] + [Ctrl]
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage:
www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically,
without explicit written approval of Delock.
Declaration of conformity
Products with a CE symbol fulfill the EMC directive (2014/30/EU), the ErP
directive (2009/125/EC), LVD directive (2014/35/EU) and RoHS directive
(2011/65/EU+2015/863+2017/2102), which were released by the EU-comission.
The declaration of conformity can be downloaded here:
https://www.delock.de/produkte/G_11476/merkmale.html
WEEE-notice
The WEEE (Waste Electrical and Electronic Equipment)-directive, which became effective as European law on February 13th 2003, resulted in an all-out change in the disposal of disused electro devices. The primary purpose of this directive is the avoidance of electrical waste (WEEE) and at the same time the support of recycling and other forms of recycling to reduce waste. The WEEE logo on the device and the package indicate that the device should not be disposed of in normal household garbage. You are responsible for taking the disused electrical and electronic devices to a respective collecting point. A separate collection and reasonable recycling of your electrical waste helps handle the natural resources more economically. Furthermore, recycling of electrical waste is a contribution to keeping the environment and thus also the health of men. Further information about the disposal of electrical and electronic waste, recycling and collection points are available in local organizations, waste management enterprises, in specialized trade and the producer of the device.
EU Import: Tragant Handels- und Beteiligungs GmbH, Beeskowdamm 13/15, 14167 Berlin, Germany
References
- Delock Domů
- Delock Home
- Delock Inicio
- Delock Accueil
- Delock Strona Główna
- Delock Produkte 11476 Delock DisplayPort 1.4 KVM Switch 8K 60 Hz mit USB 5 Gbps und Audio
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>