Meseto G8 Air Conduction Bluetooth Earbuds User Guide
- June 1, 2024
- Meseto
Table of Contents
User’s Guide and warranty
Q18 Air conduction bluetooth earbuds
G8 Air Conduction Bluetooth Earbuds
Schematic diagram and accessories
Parts list
- Bluetooth earbuds
- Magnetal charging cable
- Instruction Manual (including Warranty Card)
Instructions
Power on
In power-off mode,press and hold 5 seconds to power on
Bluetooth connection
For 1st time use,the earbuds will enter the Bluetooth pairing state
automatically after normal boot,and then can find the “Q18” pairing name on
the the device if the device bluetooth is on.
Click the connection on the device (such as mobile),the bluetooth indicator of
earbuds will be off .
Reconnection
Disconnect the current connection from the device (such as mobile),the earbuds
indicator flashes red and blue alternately,then the earbuds can be searched on
the other device and click the paring name “Q18” on other device. The earbuds
support the automatical connection to last time paired device if the bluetooth
function of the device is on
Power off
In power-on mode,press and hold 5 seconds to power off
Charging
Normal connection, the phone will display the earbuds battery, such as the
battery display red,it means need to becharged.
Operation instructions
About calling:
Answer call: Click the button when call is coming
End call:Click the button during calling
Reject call:Press and hold the button when call is coming
About music play:
In music mode: Click the button to play/pause
Next song: Double click the button
Previous song: Triple click the button
Volume up: Four click the button
Volume down: Five click the button
Click the pairing record: Double click
About Siri/voice assistant:
Press and hold the button around 3 seconds to activate voice assistant;Press
and hold 3 seconds again to cancel the voice assistant
Product parameters
Model name: Q18
Bluetooth Version: V5.3
Bluetooth Solutions: JL7006
Sound channel system: Stereo
Bluetooth Range: ≥10M
Speaker Type: Full range speaker, Ø16mm, Composite film
Battery: 501220 3.7V／90mAh
Music playing time: About 8h
Call talking time: About 6h
Standby Time: About 800 hours
Charging Time: About 1.5h
Troubleshooting
Unable to boot
Determine whether the headset is fully charged, whether the button is
misoperated, and then charge and activate.
Unable to connect to Bluetooth
Whether the headphone indicator is in the alternately flashing stage of red
and blue, such as the headphone is in the breathing state of blue light,
Indicates that the headset has been connected to other devices and needs to
disconnect the current connected device.
Can’t back to even
Make sure the front end (e.g., Bluetooth) is open properly.
Headphone volume is low
Whether the phone increases the volume, the phone needs to increase or
decrease the volume. Wearing a way Whether it is right.
Cautions:
-
In order to avoid danger, do not expose the earbuds to overheating environment;
-
Do not allow children to play with earbuds. Small parts maybe make children suffocate;
-
Do not modify or disassemble the earbuds;
-
In order to protect your hearing,do not turn up the volume too loud;
-
Do not use this product in wet or rain;
-
Do not put this product in an environment with corrosion and interference sources, in order to avoid affection on the earphone signal and function;
-
Please use the charging device within DC 5V-1A, must choose the charging device with safety certification, do not use the quick-charging device to avoid overloading the battery, shortening the life of the battery and damaging the earbuds.
Please remove chargers timely once the earbuds were charged fully, in order to avoid damaging for earbuds; -
Please charge your earphones at least once a month when not used for a long time.
Warranty card
The card is the proof for warranty,kindly please keep it carefully.
| Product name: | Product model: |
|---|---|
| Purchase date: | Client name: |
Contact details:
Warranty condition:
- If the product function issue, it is warranty service and valid is 3 month;
- If immersion or disassembly manually, and without warranty card, it is not under warranty service;
- If the warranty date expired, it is out of warranty service.
FCC Warning Statement: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment. This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.