DeLOCK 83647 USB 3.0 Data Link Cable User Manual

: June 5, 2024
: DeLOCK

Table of Contents

References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DeLOCK 83647 USB 3.0 Data Link Cable

 **User Manual**

DeLOCK 83647 USB 3.0 Data Link Cable User Manual www.delock.com

Description

This cable by Delock can be used for connection of two computers. Thus, it is possible to transfer data in both directions with USB 3.0 speed. Furthermore, it can be used one mouse and one keyboard for both computers. Just by scrolling, the cursor from one to the other display the respective computer will be activated.

Specification

Connectors:
1 x USB 3.0 Type-A male >
1 x USB 3.0 Type-A male
Chipset: OTI7300
Keyboard and mouse can be used for two computers
Switching between the computers through cursor scrolling or hot key (adjustable)
Data transfer in both directions possible
Drivers will be installed automatically, integrated in the cable
Cable gauge:
28 AWG data line
24 AWG power line
Contacts gold-plated
Colour: black
Length incl. connectors: ca. 1.5 m

System requirements

Mac OS 10.9.5 – 10.12.6
Windows 8.1/8.1-64/10/10-64
PC or laptop with a free USB Type-A port

Package content

USB 3.0 data link cable
User manual

Safety instructions

Protect the product against moisture
Protect the product against direct sunlight

Driver Installation

Windows

Switch on your computer.
Connect the cable with the thick plug to the computer. The other plug will be not connected.
The cable will be recognised automatically as a drive.
If the installation does not start automatically please start following file: SmartDataLink.exe. You can find the file there: Computer > Smartlink (free
drive letter).
After the successful installation the inactive entry: “OTI 7300 Remote NDI6.0 Based Device” appears in the Device Manager > Network Adapter.
Activate them by right-clicking on the entry and then select “Activate”.
Repeat step 1 – 6 on the second computer, which will be connected by the cable too.
You can now connect the cable with both computer and use it. Different settings can be set with the application “USB3 Smart Data Link” which you can find in the taskbar.

Mac OS

Switch on your computer.
Connect the cable with the thick plug to the computer. The other plug will be not connected.
The cable will be recognised automatically as a drive.
Open the drive and start the file: “U3MacKMLink”.
Follow the instructions of the driver installation.
If necessary, in the Security Settings > Privacy, the check mark for “U3MacKMLink” must be set.
Repeat step 1 – 5 on the second computer, which will be connected by the cable too.
You can now connect the cable with both computer and use it. Different settings can be set with the application “U3MacKMLink” which you can find in the taskbar.

Support Delock

If you have further questions, please contact our customer support support@delock.de

You can find current product information on our homepage: www.delock.com

Final clause

Information and data contained in this manual are subject to change without notice in advance. Errors and misprints excepted.

Copyright

No part of this user manual may be reproduced, or transmitted for any purpose, regardless in which way or by any means, electronically or mechanically, without explicit written approval of Delock.

Declaration of conformity

Products with a CE symbol fulfill the EMC directive (2014/30/EU) and RoHS directive (2011/65/EU+2015/863), which were released by the EU-comission.
The declaration of conformity can be downloaded here: https://www.delock.de/produkte/G_83647/merkmale.html

WEEE-notice

The WEEE (Waste Electrical and Electronic Equipment)-directive, which became effective as European law on February 13th 2003, resulted in an all out change in the disposal of disused electro devices. The primarily purpose of this directive is the avoidance of electrical waste (WEEE) and at the same time the support of recycling and other forms of recycling in order to reduce waste. The WEEE-logo on the device and the package indicates that the device should not be disposed in the normal household garbage. You are responsible for taking the disused electrical and electronical devices to a respective collecting point. A separated collection and reasonable recycling of your electrical waste helps handling the natural resources more economical. Furthermore recycling of electrical waste is a contribution to keep the environment and thus also the health of men. Further information about disposal of electrical and electronical waste, recycling and the collection points are available in local organizations, waste management enterprises, in specialized trade and the producer of the device.