SANGSTRE 5025 Bluetooth Speaker Polarized Sunglasses Instruction Manual
- June 13, 2024
- SANGSTRE
Table of Contents
- SANGSTRE 5025 Bluetooth Speaker Polarized Sunglasses
- Packing List
- ProductCoposition
- Frame Basic Parameters
- Charging&storage Case Parameters
- Bluetooth Pairing Connection
- Multipoint connection
- power prompts
- Charging operation
- DIV Accessories Assembling
- Button Controls
- Charging & Storage Case
- Reset
- Precautions
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SANGSTRE 5025 Bluetooth Speaker Polarized Sunglasses
Packing List
- Glasses*l
- Glasses case• 1
- Eyeglass doth *1
- Instructions* 1
- Safety Book * 1
- Warranaty card • 1
- screwdriver”‘ 1 bag
- Charge Cable* 1
- Packing bolt'” 1
ProductCoposition
Carefully unpack the box and check if the following parts are included. If any port is damaged or missing, do not use it, contact Songstre retailer or customer service immediately.
- Audio Temples
- Charging & Storage Case
- Cleaning Cloth
- Silicone Nose Pads
- Polarized Paper
Frame Basic Parameters
- Bluetooth Version: VS.l multi-p:>int connection
- Bluetooth Distance: 10 meters
- Waterproof Grode: IPX4
- Talk Time: 4 hours
- Working Frequency: 150Hz-8KHz
- Net Weight: 43g
- Battery Type: Lithium Polymer
- Frames Battery COpaciry: lS0mAh
- Charging Time: 40-S0min
- Volume Sync: Support
- Audio Format: support AAC
- Glasses Size (Europe): Screw SJX!Cing 125mm, Nose Pad Height 8mm
- Comi:x:,nent Materials: TR90, Aluminum Titanium Alloy, Silica Gel, etc
Charging&storage Case Parameters
- Material: Two-layer cowhide
- Charging case Battery capacity: 1350mAh
- Charging case charging method: Tapy-C
- Charging case charging time: 2.5 hours
- Integrated standby: 15 days
- Single play: 5.5 hours
- Single call: 4 hours
- Inner Charging case size: 197mmx85mmx75mm
- Outer Charging case size: 210mmx100mmx90mm
- Glasses Charging method: Put in Charging case
Power ON / OFF
- Hadyn 11 Frames will automatically power on when you put them out of the charging box.
- when the glasses was put in the charging box or if the Bluetooth is unconnected within ten minutes, it will be turned off automatically.
NOTE:
If they do not turn on or power off automatically, make sure the glasses were
fully charged, put them in the charging case, and notice voice prompts again.
Bluetooth Pairing Connection
- Connection : Sangster Frames will automatically enter pairing mode when powering on, then turn the Bluetooth button ON for your phone and search “SS II-Haydn” to pair, and the voice will notice” connected”.
- Disconnect When the device is disconnected with BluetCXJth, the voice is noted as “disconnected”, If no device is connected for more than 10 minutes, the voice notice “power off”
- After Bluetooth is connected to the phone, the Bluetooth device volume synchronizes with the phone.
- Each time you power on your Sangstre Frames, they will automatically connect to your last successfully connected device if available within the Bluetooth range.
Multipoint connection
- Pairing with a New Device:
- After the glasses are taken out of the gkJsses case and turned on, they will enter the pairing state automatically, until you hear the voice prompt.
- Reset the Bluetooth Connection:
- Turning offtre Bluetooth oftre delice being paired Or put the glasses in the glasses case and p-ess tre glasses case function key for 3 secrnds ta re-establish tre connectioo with the new delic:e.
- If they fail to connect the historical pairing device, They can be paired with the new device.
Note : Hadyn II audio glasses be paired only two device can be connected at one time, but it cannot support 2 devices working at the same time, you can switch 2 devices at any time. and the pairing records of 5 devices can be kept and they will delete the least used devices recently when paired with new devices.
power prompts
- Sufficient power: Long press the bottom of charging box touch button for 2-3 seconds, the LED indicator steady green. (Battery>80%)
- Power Available: Long press me bottom of charging box touch button for 2 -3 seconds, the LED indicator steady blue. (Battery: 20%-80%)
- Low Battery: Long press the bottom of charging box touch blltton for 2-3 seconds, the LED indicator steady red. (Bottery<20%)
- When you connect bo1h audio temples to the diorging port, the LED indicator in the charging box will tum red.
Charging operation
Please judged the chaging box power by short-pressing The function key shows The color of the indicator. (The function key is located charging case bottom)
- Charging for frame separately
- Stepl. Align the charging pins in the magnetic charging glasses case with the cha r ging port on the audio temples.
- Step2. ‘When you connect both audio temples to the cha r ging port, the LED indicator in the charging box will turn red. Charging: The red LED in the charge box keeps lighting.
- Charging for charging box separately Step: Connect the end end of the charging cable to the charging glosses box USB charger. Charging: The red LED keeps lighting. FUty charged: The blue LED lighting up.
- The frame is put in a Charging case and charged together
- Step 1. Align the charging pins in the magnetic charging glasses case with the charging port on the audio temples.
- Step 2. When you connect both audio temples to the charging port, the LED indicator in the charging box will tum red.
- Step 3. Connect the end end of the charging cable to the charging glasses box USB charger.
- Charging: The red LED keeps lighting.
- Fully charged: The blue LED lighting up.
- Note:
- If correctly connected, the LED indicator located in the charging case and on the bottom of the charging function key will turn red.
- Use the provided magnetic charging Case to prevent any damage.
- Fully charge your Sangstre Frames before the first use.
- Avoid wearing your Sangstre Frames while charging
DIV Accessories Assembling
The Metal Frame/sunglass Frame replaceable solution The Front frame can be replaced with our sunglasses front frame, our daily glasses front frame, our prescription glasses front frame, etc.
- As shown in the photo above, there are 2 screws. Just loosen the screws to replace the Front Frame when it needs to be replaced, then install another front frame with a sere-Nd river into the position on the temple hinge so they are secure. (attached).
- If you want to change the other style frame (sold separately), release the screws on the hinges and pull the audio temples slightly to disassemble.
- If the prescription lens needs to be replaced after you have completed your order, it is recommended to find the local optical shop for help.
Button Controls
- Please make sure to touch the functions that are located in the logo area on the audio temples so that the toud’l controls are triggered.
- After connecting, adjust the volume by using the volume controls on your mobile device.
Charging & Storage Case
Storage& Charge
To ensure Hadyn 11 Frame can be charged by connecting with the charging JXlrT in a case successfully please follow the below steps to complete the charging operation and storage operation of the frame.
-
Step 1 Check the sequence of the glass temples to be folded Fold the left temple end to the righttempleinsec:μ!11Ce.
-
Step 2 The frame s placed in the charging box, the indicator light in the charging box lig hts up red, and then the shutdown prompt sOU”d will sou-,d.
-
Step3 If the ilcflCOtor light foils to light up, 1ry to C’qusr the rx>Sition of the glosses Old dlE!Ck the reasc,n why the diverging cannot be successful
-
- Make sure to fully charge the built-in battery before storing them for a long period of time.
-
- Check if the frame is twisted and deformed and if the distance among the screws of the frame temple’ pile head is changed.
-
- Check whether the glasses case is squeezed and deformed so that the position of the glasses in the glasses case deviates.
Reset
- Reset your Hadyn TT Frames if you encounter any connection or function problems.
- Press and hold the function key area on the bottom of the charging box for 8 seconds until you hear the music prompt.
- Reset the Bluetooth Connection
- Turn off the Bluetooth of the device being JX]ired or p..1t the glasses in the glasses case and Press and hold the function key area on on the bottom of the charging box for 3 seconds until the indicator light turns red and blue alternately to enter pairing mode to re-establish the connection with the new device directly.
- If they fail to connect the historical pairing device, they can be paired with the new device.
Precautions
- Don’t OY8′-pre5S end bend;
- Don’t put in 60 C or above to avoid battery damage;
- Keep Frames in a dry environment. If they come into contact with liquid, use the “cool” setting on a hairdryer to dry them;
- Do not immerse frames in water or expose them to seawater, salt water, chlorinated water, or other liquids (such as beverages);
- Do not expose frames to pressurized water, high-velocity water, soapy water, or extremely humid conditions (such as a steam room);
- Do not spill any food, oil, lotion, or other abrasive substances on Frames;
- Don’t use sharp knives to pierce or cut the glasses component to avoid damaging the circuit;
- The shell of the frame temples can’t be disassembled, in case of maintenance, you need to consult professionals first;
- Please use a 5V adapter to charge, otherwise, Bluetooth glasses will be damaged;
- The adiusting screw should not be tightened to prevent the screw from breaking due to excessive torque
- Users can choose the appropriate volume according to the use scene, such as outdoor or indoor, to achieve the best consideration of external sound and keep better privacy;
- Clean frames with a soft, dry cloth. Do not use water, chemicals, or abrasive materials to clean the frames. To clean the lenses, use an alcohol-free lens cleaner and a soft cloth.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>