UPLIFT DESK WMK007 Magnetic Cable Organizing Channel Instructions
- June 4, 2024
- UPLIFT DESK
Table of Contents
UPLIFT DESK WMK007 Magnetic Cable Organizing Channel
Package Contents
Magnetic Cable Organizer Channel
Steps
Step 1
Gather your cords, cables, and wires and thread them one at a time through the
Magnetic Cable Organizing Channel’s open slot, until all plugs are coming out
on the same end.
Step 2
Place the Magnetic Cable Organizing Channel on the long & flat part of your
desk’s leg.
On V2 Desks, on the outside or inside part of the leg’s longest section.
On V2-Commercial Desks, only on the outside of the leg’s longest
section.
Note: Do NOT place the Channel along two different pieces of metal. If
the magnets are attached to uneven pieces of metal, it may not stay attached
properly.
Note: Do NOT place the Channel in a place that will cause it to become
caught on an edge, or crushed when the desk is lowered. On UPLIFT Desk V2-Com-
mercial models, do not place the channel anywhere between the crossbar and the
desktop.
CAUTIONS & WARNINGS
CAUTION : Read all instructions before assembly. Failure to assemble or
operate properly may result in damage or personal injury. Retain manual for
future reference.
WARNING: Do not create a pinch point, make sure the Channel is positioned
in such a way to keep wires and fingers away from obstacles and moving parts
of your desk.
Copyright Notice: This guide is a component of the Magnetic Cable
Organizing Channel. This guide is a part of the scope of delivery, even if the
item is resold. This guide is also available on the UPLIFT Desk website:
upliftdesk.com. Excerpts or copies may not be
forwarded to third parties or used in any other published form without the
prior written consent of UPLIFT Desk. These instructions are subject to United
States copyright law.
UPLIFT Desk • 1-800-349-3839 •
info@upliftdesk.com •
www.upliftdesk.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>