milwaukee M18BMT M18 Multi Tool User Manual
- June 10, 2024
- Milwaukee
Table of Contents
Nothing but HEAVY DUTY®.
M18 BMT
Original instructions
M18BMT M18 Multi Tool
Text section with Technical Data, important Safety and Working Hints and description of Symbols
Remove the battery pack before starting any work on the machine.
TECHNICAL DATA
MULTITOOL
M18 BMT
Production code…………………………………….. 4478 25 05…
………………… 4462 04 05… …000001-999999
Noise/Vibration Information
Measured values determined according to EN 62841
Typically the A-weighted sound pressure level of the tool is:
Sound pressure level (Uncertainty K=3dB(A)) …………………. .79,8 dB (A)
Sound power level (Uncertainty K=3dB(A)) ……………………… 90,8 dB (A)
Wear ear protectors!
Total vibration values (vector sum in the three axes)
determined according to EN 62841.
Vibration emission value ah*1
Sanding ……………………………………………………………………… 3,6 m/s²
Uncertainty K = …………………………………………………………..1,5 m/s²
Sawing wood ……………………………………………………………….12,3 m/s²
Uncertainty K = …………………………………………………………. ..1,5 m/s²
Cutting wood………………………………………………………………..12,3 m/s²
Uncertainty K = ………………………………………………………….1,5 m/s²
*1 with saw blade bimetal, dimension 91,12 x 32,5 x 0,6 mm and tooth pitch 1,35 mm
WARNING
The vibration and noise emission level given in this information sheet has
been measured in accordance with a standardized test given in EN 62841 and may
be used to compare one tool with another. It may be used for a preliminary
assessment of exposure.
The declared vibration and noise emission level represents the main
applications of the tool. However if the tool is used for diff erent
applications, with diff erent accessories or poorly maintained, the vibration
and noise emission may diff er. This may signifi cantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration and noise should also take
into account the times when the tool is switched off or when it is running but
not actually doing the job. This may signifi cantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator from the eff ects
of vibration and/or noise such as: maintain the tool and the accessories, keep
the hands warm, organization of work patterns.
WARNING Read all safety warnings, instructions, illustrations and specifi
cations provided with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
MULTITOOL SAFETY WARNINGS
Hold the power tool by insulated gripping surfaces, when performing an
operation where the cutting accessory may contact hidden wiring. Cutting
accessory contacting a „live“ wire may make exposed metal parts of the power
tool „live“ and could give the operator an electric shock.
Use clamps or another practical way to secure and support the workpiece to a
stable platform. Holding the work by your hand or against the body leaves it
unstable and may lead to loss of control
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Use protective equipment. Always wear safety glasses when working with the
machine. The use of protective clothing is recommended, such as dust mask,
protective gloves, sturdy non-slip footwear, helmet and ear defenders. The
dust produced when using this tool may be harmful to health. Do not inhale the
dust. Wear a suitable dust protection mask. Do not machine any materials that
present a danger to health (e.g. asbestos).
Switch the device off immediately if the insertion tool stalls!
Do not switch the device on again while the insertion tool is stalled, as
doing so could trigger a sudden recoil with a high reactive force. Determine
why the insertion tool stalled and rectify this, paying heed to the safety
instructions.
The possible causes may be:
- it is tilted in the workpiece to be machined
- it has pierced through the material to be machined
- the power tool is overloaded
Do not reach into the machine while it is running.
The insertion tool may become hot during use.
WARNING! Danger of burns
- when changing tools
- when setting the device down
Chips and splinters must not be removed while the machine is running.
When working in walls ceiling, or fl oor, take care to avoid electric cables
and gas or waterpipes.
Clamp your workpiece with a clamping device. Unclamped workpieces can cause
severe injury and damage.
Do not use cracked or distorted saw blades.
Plunge cuts without pre-drilling a hole are possible with soft materials
(wood, light building materials for walls). Harder materials (metals) must fi
rst be drilled with a hole corresponding to the size of the saw blade.
Remove the battery pack before starting any work on the machine.
Do not dispose of used battery packs in the household refuse or by burning
them. Milwaukee Distributors offer to retrieve old batteries to protect our
environment.
Do not store the battery pack together with metal objects (short circuit
risk).
No metal parts must be allowed to enter the battery section of the charger
(short circuit risk).
Use only System M18 chargers for charging System M18 battery packs. Do not use
battery packs from other systems.
Never break open battery packs and chargers and store only in dry rooms. Keep
dry at all times.
Battery acid may leak from damaged batteries under extreme load or extreme
temperatures. In case of contact with battery acid wash it off immediately with
soap and water. In case of eye contact rinse thoroughly for at least 10
minutes and immediately seek medical attention.
Warning! To reduce the risk of fire, personal injury, and product damage
due to a short circuit, never immerse your tool, battery pack or charger in
fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such
as seawater, certain industrial chemicals, and bleach or bleach containing
products, etc., can cause a short circuit.
SPECIFIED CONDITIONS OF USE
The Maschine can be combined with diff erent tools and is designed for
following use:
Sander Head: sanding wood, metal and plastics
Segment saw blade head: for cutting flush to a surface in wood and plastics.
Universal blade head: for working in wood.
Do not use this product in any other way as stated for normal use.
EC DECLARATION OF CONFORMITY
We declare as the manufacturer under our sole responsibility that the product
described under “Technical Data” fulfi lls all the relevant regulations and the
directives
2011/65/EU (RoHS), 2014/30/EU, 2006/42/EC, and the following harmonized
standards have been used:
EN 62841-1:2015
EN 62841-2-11:2016+A1:2020
EN 55014-1:2017+A11:2020
EN 55014-2:2015
EN IEC 63000:2018
Winnenden, 2022-04-22
**** Alexander Krug
Managing Director
Authorized to compile the technical fi le.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
DECLARATION OF CONFORMITY
We declare as the manufacturer under our sole responsibility that the
product described under “Technical Data” fulfi lls all the relevant provisions
of the following Regulations S.I. 2008/1597 (as amended), S.I. 2016/1091 (as
amended), S.I. 2012/3032 (as amended) and that the following designated
standards have been used:
BS EN 62841-1:2015
BS EN 62841-2-11:2016+A1:2020
BS EN 55014-1:2017+A11:2020
BS EN 55014-2:2015
BS EN IEC 63000:2018
Winnenden, 2022-04-22
Alexander Krug
Managing Director
Authorized to compile the technical fi le.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
BATTERIES
Battery packs which have not been used for some time should be recharged
before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery
pack. Avoid extended exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, after use, the battery packs have to be fully
charged.
To obtain the longest possible battery life remove the battery pack from the
charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C and away from
moisture
Store the battery packs in a 30% – 50% charged condition Every six months of
storage, charge the pack as normal.
BATTERY PACK PROTECTION
The battery pack has overload protection that protects it from being
overloaded and helps to ensure long life.
Under extreme stress the battery electronics switch off the machine
automatically. To restart, switch the machine off and then on again. If the
machine does not start up again,
the battery pack may have discharged completely. In this case it must be
recharged in the battery charger.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
Transportation of those batteries has to be done in accordance with local,
national and international provisions and regulations.
-
The user can transport the batteries by road without further requirements.
-
Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations. Transport preparation and transport are exclusively to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.
When transporting batteries: -
Ensure that battery contact terminals are protected and insulated to prevent short circuit.
-
Ensure that battery pack is secured against movement within packaging.
-
Do not transport batteries that are cracked or leak. Check with forwarding company for further advice
MAINTENANCE
Use only Milwaukee accessories and spare parts. Should components need to be
replaced which have not been described, please contact one of our Milwaukee
service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the machine type printed as well as the six-digit No. on the
label and order the drawing at your local service agents or directly at:
Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
| CAUTION! WARNING! DANGER!
---|---
| Remove the battery pack before starting any work on the machine.
| Please read the instructions carefully before starting the machine.
| Wear gloves!
| Always wear goggles when using the machine.
| Do not dispose of waste batteries, waste electrical and electronic equipment
as unsorted municipal waste. Waste batteries and waste electrical and
electronic equipment must be collected separately. Waste batteries, waste
accumulators and light sources have to be removed from equipment. Check with
your local authority or retailer for recycling advice and collection point.
According to local regulations retailers may have an obligation to take back
waste batteries and Waste electrical and electronic equipment free of charge.
Your contribution to re-use and recycling of waste batteries and waste
electrical and electronic equipment helps to reduce the demand of raw
materials. Waste batteries, in particular containing lithium and waste
Electrical and electronic equipment contain valuable, recyclable materials,
which can adversely impact the environment and the human health, if not
disposed of in an environmentally compatible manner. Delete personal data from
waste equipment, if any.
n0| Stroke rate under no-load
V| Volts
| Direct current
| European Conformity Mark
****| British Confomity Mark
| Ukraine Conformity Mark
| EurAsian Conformity Mark
Copyright 2022
Techtronic Industries GmbH
Max-Eyth-Str. 10
71364 Winnenden
Germany
+49 (0) 7195-12-0
www.milwaukeetool.eu
Techtronic Industries (UK) Ltd
Parkway
Marlow, SL7 1YL
UK
(04.22) 4100 4145 55
Documents / Resources
|
milwaukee M18BMT M18 Multi
Tool
[pdf] User Manual
M18BMT M18 Multi Tool, M18BMT, M18 Multi Tool, Multi Tool
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>