Maxima 09399303 Potato Chip Cutter User Manual

: June 10, 2024
: maxima

Table of Contents

SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
PREFACE
PRODUCT INFORMATION
TRANSPORT
INITIAL SET-UP
OPERATION
MAINTENANCE
TROUBLESHOOTING
STORAGE
DISCARDING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Maxima 09399303 Potato Chip Cutter User Manual

SAFETY INSTRUCTIONS

This appliance may only be used for its designed purpose. Neither the manufacturer nor the supplier are liable for damage caused by the incorrect use of this item.
This is a commercial product and should only be used those who have read and fully understand this manual. It must not be used by children, or persons with reduced physical, sensory or mental capabilities without supervision.
This device is intended for indoor use only.
Keep the appliance and electrical plug away from water and other liquids. If either is exposed to a liquid, immediately disconnect the power supply and have the appliance checked by a certified technician. Not following these instructions may result in electric shock, or even death.
Do not use the appliance after it has fallen or if is damaged in any way. Have it checked and repaired by a certified technician.
Do not move the appliance while in operation and never move or carry the appliance by the power cord.
Do not place or move the appliance on its side, upside-down or while tilted.
Do not open the casing or try to repair the appliance yourself, unless instructed to by a Maxima technician. This may void the warranty, cause damage to the machine or result in a hazardous situation.
Do not use any devices or accessories that are not supplied with the appliance or designed to work with it.
Never put your hands or other body parts near the moving parts of the appliance while operational and always keep an eye on the appliance when in use.
Do not insert objects in the casing or openings of the appliance.
Keep all packaging away from children and dispose of packaging in accordance with local and national regulations. EN
Avoid overloading the appliance.
The electrical installation must comply with local regulations.
Switch off the appliance before removing the power plug.
Always disconnect the power supply when the appliance is not in use. To remove the plug from the socket, always pull the plug itself and not the cable.
Do not touch the power plug with damp or wet hands.
Keep the power cable away from the range of operation and do not cover the cable. Make sure the power cable does not come in contact with hot or sharp objects and keep it away from open flames.
Note that while the plug is in the electrical socket, the appliance is connected to the electric grid.

SAFETY INSTRUCTIONS

Store product between 10-30°C.
Avoid placement in direct sunlight.
Product intended for indoor use.
Basic electrical insulation: requires grounded connection.
Double electrical insulation: does not require grounding/earth connections
Uses Safety Extra-Low Voltage (SELV) power supply: user protection not required
Product disposal according to local waste regulations.
Product meets CE requirements

PREFACE

Introduction
Thank you for purchasing this product from Maxima. To ensure your own safety and to get the best out of your purchase, please read the instructions carefully before attempting to install or use this product. This manual should be available at all times and stored near the appliance. All Maxima products are CE certified. As a result, our products meet the legal requirements regarding health, safety and the environment, as set out by the European Commission. In addition, all products are thoroughly tested prior to shipment to ensure product quality and safety.

General information
For after sales support, please visit our Customer Service page at: www.maxima.com/service. User manuals are available online and can be downloaded electronically from the product’s page on our website. If the manual for your product is not available, please contact Customer Service. For more information, visit our website: www.maxima.com

Warranty
We offer a 12 month warranty from the date of purchase, as indicated on your purchase invoice. Under the warranty, we will deliver additional spare parts in case of: material defects, manufacturing defects or other quality issues.
The following is not covered by the warranty:

Damage relating to the incorrect use of the product
Damage relating to use of parts that were not part of the original machine
Damage due to transport to another location after delivery, or incorrect installation and connection
Component damage caused by incorrect electrical or water connection
Damage as a result of disassembly and/or modification to the original machine without permission
Damage as a result of misuse, poor cleaning or improper maintenance
Damage as a result of fire, building collapse, lightning, flooding, power surges or vermin
Failure to read or follow the user manual
Consumables and parts prone to wear and tear
An altered invoice or no invoice

PRODUCT INFORMATION

Intended use
This appliance may only be used for the purpose for which it was designed and intended. The manufacturer and supplier are not liable for any damage caused by incorrect operation and improper use. This is a commercial product and must only be used by a trained professional who has read and understands this manual. It must not be used by children or persons with reduced capabilities without supervision.

Specifications

MAXIMA POTATO CHIPPER

Features
Maxima’s products offer a wide range of features. You can read more about these in Appendix 1.

Spare parts list
A exploded view and comprehensive list of the parts of this appliance is available in Appendix 2.

TRANSPORT

Transport & handling
This appliance needs to be lifted by two or more people. Remember to always lift from the legs and not the back. Never try to lift or move objects beyond your capabilities. Ask for assistance or use the appropriate equipment, if necessary.

Packaging
Unpack and inspect your purchase immediately after receipt. If there are any latent defects or damage to the item, please contact your supplier immediately. Save all packaging materials in case the machine needs to be returned or inspected by the courier.

Before use
Remove any protective film from any surfaces and clean the appliance and accessories thoroughly before use (see section on “Maintenance”).

INITIAL SET-UP

Wiring & connections
If your machine is supplied with a factory fitted molded plug then you may plug the unit into a standard electrical outlet. Make sure that the voltage of the machine and the wall outlet are compatible. If your machine is not supplied with a factory fitted molded plug then a certified electrician must be contracted to wire the unit to the power supply. Please find the circuit diagram in appendix 3.

Placement
The appliance must be positioned on a stable, flat surface. Choose a surface where there is no direct sunlight and is not close to a direct heat source, such as a cooker, oven or radiator. When positioning the appliance, keep a distance of 10cm (4″) between the appliance and walls, or other objects for ventilation and ease of use. Position the appliance so that the plug is accessible at all times. Always plug the power cord into a compatible, grounded socket. This appliance should be operated between the temperatures of 5 and 40ºC and in an ambient humidity of maximum 65%.

Cleaning
Regularly check and clean the appliance, its parts and accessories. Always switch off and disconnect the power and gas supply before any cleaning or maintenance. Never use aggressive or abrasive cleaning agents. Do not use solvents or petroleum based cleaning agents. Some cleaning agents may leave a harmful residue or cause damage to the machine. Use a mild food-safe cleaning product instead. Do not use a scourer or any sharp objects during cleaning as this may cause damage to the machine. Never hose down the machine or immerse it in water or any other liquid. Instead wipe the exterior with a damp cloth. Do not use a steamer to clean the machine. Never let the power cable or power plug get wet. Some potatoes can get stuck between the blade block if there are not enough potatoes in the aluminium pusher disc drum to push them towards to blade block group. The feeding hopper should be opened and the blade block group should be removed and cleaned carefully.
The blades are sharp and can cause injury. Anyone who cleans the device should do so carefully

Installation requirements
POTATO SIZE AND CAPACITY
Potato chipper capacity depends on the size of the appliance’s drum cutter.
See diagram in appendix 1 for the maximum potato sizes.
See diagram in appendix 1 for removing the feeding hopper

OPERATION

How to use the appliance

The feeding hopper can hold 47 litres.
Potatoes should never exceed the indicated max size.
Do not use to cut hard materials, such as metal, stones or plastic.
Do not put your hands inside the feeding hopper unless the appliance is off.
Be careful when handling the blade group as it is very sharp.
This appliance should never be operated without a grounded electrical connection.

This appliance should only be operated by someone who has read the instruction manual.

Motor, belt or other technical repairs should only be made by experienced technicians or if instructed to by an experienced technician.
Ensure that the blade block group is properly mounted and the machine is correctly installed before operating the appliance.
Place the potatoes inside the feeding hopper.
To activate the appliance, press the start button located on the control panel. This will activate the pusher drum disc. The disc then pushes the potatoes through the blade block and cuts the potato.
The feeding hopper should never be opened during operation. If the hopper is opened during operation the machine will automatically stop. The blade block group must be correctly installed in order for the machine to start.
Keep the control panel away from water.
When the cutting process is finished, the machine can be stopped by pressing the stop button. The last potato will remain stuck on the blade block.
Ensure that the machine is turned off and disconnect the power supply before removing the last potato from the blade.

MAINTENANCE

Regularly check the power plug and power cable for damage. If either is damaged, do not use the appliance. Instead, have it repaired by a certified electrician. Periodic maintenance should be carried out by an experienced technician. It is recommended to carry out maintenance at least every six months, depending on the frequency of use. Periodic maintenance conducted by authorized service personnel from Maxima is charged, even the guarantee period has not expired.

INTERVAL	ACTION	DESCRIPTION

Daily

|

Cleaning & disinfecting

| Remove and clean the pusher disc and blade group after each use.Parts may be cleaned with water and mild detergent and must be rinsed thoroughly. Do not put the parts or accessories in the dishwasher.
Weekly| Surface cleaning| It ’s recommended to wipe the exterior of the appliance at least once a week.

TROUBLESHOOTING

PROBLEM	POSSIBLE CAUSE	POSSIBLE SOLUTION

**** Blades do not rotate, even though the Start button has been pressed.| Main fuse may be blown.| Check the main fuse. Ensure the electricity is on.
Aluminium pusher disc drum may be stuck.| Turn off the machine by pressing the Stop button. Open the feedinghopper and solve the stuck problemand try again.
**** The feeding hopper may not be fully closed.| When the feeding hopper is closed, the magnetic sensor recognizesthe hopper and activates it. Ensure the feeding hopper is closed beforeoperation.
**** Blade block group may not be in place.| When the blade group is closed,the magnetic sensor recognizes theblade and becomes activated. Ensure the blade is correctly installedbefore operations.
**** Blades do not cut.| Blades may be blunt.| Replace blunt blades with new ones.
There may not be enough potatoesin the aluminium pusher to push the potatoes to the blades.| This is normal. Throw more potatoes into the feeding hopper and continue operation.
The blades may be stuck and not able to rotate.| Remove stuck potatoes with care.
**** Last potato remains between the blades.| There may not be enough potatoes in the aluminium pusher to pushpotatoes to the blades.| This is normal. Add more potatoes to the feeding hopper and continue operation.

STORAGE

Roll the power cable up and store it safely. Make sure the appliance is thoroughly cleaned before storing it away. Store in a cool, dry place.

DISCARDING

When disposing of this appliance, please do so in compliance with local and national regulations. It’s also important to dispose of any related materials correctly. This piece of equipment may contain packaging and accessories that have to be collected and disposed of separately. These should not be treated as unsorted municipal waste.

Recycling contributes to the conservation of natural resources. By disposing of waste in the proper manner, you help avoid hazards in the environment that could be caused by improper treatment of waste.
Packaging: The packaging is made from materials to be disposed of through local recycling facilities.
Batteries: If the machine contains a battery, these may contain toxic substances and are a hazard to the environment. Please dispose of used or rechargeable batteries responsibly through a local collection point.
Electronics: This appliance contains electronic parts. Dispose of electrical waste at a recycling collection point for electronic equipment.