Neomounts MED-M050 Medical Mount Cart Instructions Manual

June 10, 2024
Neomounts

Neomounts MED-M050 Medical Mount Cart

Neomounts-MED-M050-Medical-Mount-Cart-product

Dimensions Overview

Measurement and Parts

Neomounts-MED-M050-Medical-Mount-Cart-fig-3

Assembling

STEP 1

Neomounts-MED-M050-Medical-Mount-Cart-fig-4

STEP 2

Neomounts-MED-M050-Medical-Mount-Cart-fig-5

STEP 3

Neomounts-MED-M050-Medical-Mount-Cart-fig-6

STEP 4

Neomounts-MED-M050-Medical-Mount-Cart-fig-7

CART ADJUSTMENTS AND OPERATIONS

Neomounts-MED-M050-Medical-Mount-Cart-fig-8

WARNING

Please put the brake on the casters when the cart is not in motion

Neomounts-MED-M050-Medical-Mount-Cart-fig-9

MAINTENANCE

All cart maintenance must be carried out at least once a month by a professional technician.

Cleaning warning

Because the cart is in the environment of electrical equipment, the usage of inflammable cleansers is strictly forbidden.

  1. Before cleaning the cart, please make sure the cart is unplugged from the mains and switched off.
  2. Please ensure the cart is entirely dry before plugging the power into the socket.
  3. While cleaning the cart, please use a damp cloth to wipe off the superficial cleansers until completely dry.
  4. The cart is not to be used in a moist environment and liquids have to be avoided from running into the cart.
  5. To avoid the finishing of the surface is damaged, do not use any abrasive materials for cleaning.
  6. Before using any cleanser on the cart, please test them on a small part to see whether it affects the surface or not.

Please note that these guidelines give no guarantee whatsoever in terms of infection control. Kindly consult your medical infection control specialist for cleaning advice.

Cleaning recommendations
  1. Please use non-abrasive or diluted products such as soap water and diluted alcohol to clean the plastic components.
  2. In case of spots of pen or maker on the cart’s surface, a soft cloth with 91% isopropyl alcohol is suggested for cleaning.
  3. In case of iodine spots on the cart’s surface, a soft cloth with soap water, or diluted alcohol is suggested for cleaning.

The following chemicals are strictly forbidden for cleaning the cart: Abrasive cleansers, acetone, mineral spirits, paint thinner, or any other harsh or toxic chemicals.

Inspections

  • All cart inspections must be carried out at least once a month by a professional technician.
  • In case of faults or damage occurring, stop operating the cart and contact your distributor for further assistance.

Casters
To allow the cart to move as intended, please inspect the casters regularly and keep the cart away from damaged and irregular surfaces.

Fasteners
lf fasteners/ screws become loose and need to be tightened, do not over- tighten them. Over-tightened fasteners/ screws might not only cause damage to the screws but also to the components.

Troubleshooting

The cart is difficult to move
Ensure the two front locking casters are not locked. Check if any debris is sticking to casters and remove it.

The cart is difficult to adjust in height
Ensure the lift brake is pressed completely and lift the work surface slightly, to prevent the work surface to rise too quickly. lf the lift mechanism still doesn’t work, please contact your distributor for further assistance. Also, contact your distributor for assistance if the lift mechanism keeps going up automatically.

CAUTION

  1. To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
  2. The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
  3. The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquakes or typhoons.
  4. It is recommended that the mount be installed by qualified personnel only.
  5. At least two persons are needed to install or remove the product to avoid the hazard of falling objects.
  6. Please carefully inspect the area where the mount is to be installed:
    • Avoid places that are subject to high temperatures, humidity, or contact with water.
    • Do not install the product near air conditioning vents or areas with excess dust and fumes.
    • Only install on vertical walls and avoid slanted surfaces.
    • Do not install in places subject to any shock or vibration.
    • Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
  7. Maintain sufficient space around the display to ensure adequate ventilation.
  8. To ensure a safe installation, first check the structure of the wall, ceiling, or floor and select a secure mounting location.
  9. The wall, ceiling, or floor should be strong enough to sustain a weight of at least four times the display and mount combined. The mounting location must be able to withstand earthquakes or other strong shocks.
  10. Do not modify any accessories or use broken parts. Contact your dealer with any questions.
  11. Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
  12. Drill holes and bolts will be left in the wall, ceiling, or floor once the display and bracket are removed. Stains may occur after extended use.
  13. Since the manufacturer has no way to control the wall, ceiling, or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
  14. Please consult the English language manual for any dispute on conditions.

User Support

  • Address: Neomounts Computer Products Europa B.V. I Wateringweg 62 I 2031 EJ Haarlem I The Netherlands I
  • Contact no. +3 1(0)23-5478888
  • Support:  info@neomounts.com
  • Email:  www.neomounts.com

FAQ’s

What is different about medical carts?

Medical carts are further divided into two basic categories: powered carts, which provide their own power source for computers and other peripherals via an integrated battery; and non-powered carts, which offer no battery and require the computers and other components they carry to find other power sources.

What is the purpose of a medication cart?

True to its name, the Medication Cart is used to transport medications from patient room to patient room. These carts often come equipped with locking drawers, adjustable height, and a mobile computer bay for quick access and reference when needed.

Is a cart a medical device?

Medical devices, such as hospital carts, fall under MED-M050 risk management testing. Many medical carts are considered medical devices by the FDA because they meet the three requirements set forth in section 201(h) of the Federal Food Drug and Cosmetic Act.

What are medication carts?

True to its name, the Medication Cart is used to transport medications from patient room to patient room. These carts often come equipped with locking drawers, adjustable height, and a mobile computer bay for quick access and reference when needed.

Are you sure this is for a laptop? mainly because it appears to be for a separate keyboard and monitor.

Although it is a computer cart, many customers place a laptop on the 17.3′′-deep tabletop. Some people add a separate keyboard to the keyboard tray and a separate monitor to the bracket or stand when using a laptop as a CPU. The LCD mount may need to be turned to the side if you use the tabletop for a laptop so you can open it and use the screen. Depending on the size of the laptop. I can tell you how well it will fit if you tell me the size of your laptop.

When the screen is slid through the rear for security, can the power button still be reached?

Depending on where the power button is located on the laptop, it might not be accessible unless it is on the screen or the back edge of the keyboard, which is highly improbable.

What size does the item have? LxWxH?

Neomounts MED-M050 multimedia cart product dimensions are 42 x 37 x 57 cm.

What is the Neomounts MED-M050 Medical Mount Cart weight?

The Neomounts MED-M050 Medical Mount Cart weight is 6.57 kilograms.

What is an experience in a warranty?

Neomounts has more than 20 years of expertise supplying high-specification mounts with a 5-year warranty. “Everything you pay for, you get!

Does it work with a variety of mice and keyboards?

Yes!, It can be used on the movable keyboard and mouse holder and is compatible with a variety of mice and keyboards.

Download this PDF Link:Neomounts MED-M050 Medical Mount Cart Instructions Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals