tp-link 7106508102 Deco Router Installation Guide

: June 10, 2024
: tp-link

Table of Contents

tp-link 7106508102 Deco Router
Product Information
LED Status
Product Usage
Getting Started
Safety Information
GNU General Public License Notice
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

tp-link 7106508102 Deco Router

tp-link-7106508102-Deco-Router-product

Product Information

The Deco Router is a high-performance router designed for seamless Wi-Fi coverage in your home or office. The router comes with multiple Decos that work together to form a comprehensive Wi-Fi network. Each Deco has an LED light that changes color to provide information about its status. The router can be set up using the TP-Link Deco app for iOS or Android.

LED Status

LED Status Each Deco has an LED light that changes color according to its status. See the explanation below.
The LED light on each Deco changes color to indicate its status:

LED Color	Deco Status
Yellow pulse	Deco is resetting.
Yellow solid	Deco is starting up.
Blue pulse	Deco is ready for setup.
Blue solid	Deco is setting up.
Green pulse/White pulse	Deco is upgrading firmware.
Green solid/White solid	Deco is registered and all is well.
Red pulse	Deco is disconnected from main Deco.
Red solid	Deco has an issue.

Product Usage

Follow the below steps to use the Deco Router:

Download the TP-Link Deco app for iOS or Android.
Follow the instructions on the app to set up the Deco Router.
Check the LED colors to determine the status of each Deco in the network.
If a Deco has issues, refer to the user manual or go to the TP-Link support website for assistance.

Need Help?

If you need technical support or have any questions, please refer to the FAQs on the TP-Link support website.
(FAQs) and technical support, please go to https://www.tp-link.com
Navigate to Deco’s support page the Deco app Swipe right at the main page and select? Help from the menu.

Getting Started

tp-link-7106508102-Deco-Router-
fig-1

Download the TP-Link Deco app for iOS or Android. The app will walk you through the setup.

Safety Information

The adapter shall be installed near the equipment and shall be easily accessible.

Keep the device away from water, fire, humidity, or hot environments.
Do not attempt to disassemble, repair, or modify the device.
Do not use a damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Do not use devices where wireless devices are not allowed.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, and 2011/65/EU.
The original EU Declaration of Conformity may be found at http://www.tp- link.com/en/ce.

For TP-Link Branded Products Only. For more information about the warranty, please visit
http://www.tp-link.com/en/support
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE). TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES, AND CONDITIONS.

TP-Link warrants the TP-Link branded hardware product contained in the original packaging against defects in materials and workmanship when used normally in according with TP-Link’s guidelines for some period which depends on the local service from the date of original retail purchase by the end-user purchaser.

Operating Frequency/max output power

2400MHZ ~ 2483.5MHz /20dBm 5150MHz ~ 5250MHz /23dBm

Attention : This device may only be used indoors in all EU member states and EFTA countries.

GNU General Public License Notice

This product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”). As applicable, TP-Link (“TP-Link” in this context referring to the TP-Link entity offering respective software for download or being responsible for the distribution of products that contain respective code) provides, by itself or with the support of third parties (e.g. the TP-Link Technologies Co., Ltd. seated in China), mail service of a machine-readable copy of the corresponding GPL source code on CDROM upon request via email or traditional paper mail. TP- Link will charge for a nominal cost to cover shipping and media charges as allowed under the GPL. This offer will be valid for at least 3 years.
For GPL inquiries and the GPL CD-ROM information, please contact GPL@tp- link.com or write to Building 24(floors 1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China. Additionally, TP-Link provides for a GPL-Code- Centre under http://www.tp- link.com/en/support/gpl/ where machine-readable copies of the GPL source codes used in TP-Link products are available for free download. Please note, that the GPL-Code-Centre is only provided for as a courtesy to TP-Link’s customers but may neither offer a full set of source codes used in all products nor always provide for the latest or actual version of such source codes.
The GPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors.
Copyright © 2018 TP-Link Technologies Co., Ltd. All rights reserved.
www.tp-link.com