Novus NVS-3324SP 24 Port PoE Plus Switch User Manual

: June 10, 2024
: Novus

Table of Contents

IMPORTANT SAFEGUARDS AND WARNINGS
FOREWORD INFORMATION
FEATURES AND SPECIFICATION
LOCATION AND FUNCTION OF THE SWITCH COMPONENTS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Novus NVS-3324SP 24 Port PoE Plus Switch User Manual

THE PRODUCT MEETS THE REQUIREMENTS CONTAINED IN THE FOLLOWING DIRECTIVES:

DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIMENT AND OF THE COUNCIL of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (OJ L 96, 29.3.2014, p. 79–106, with changes)

DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits.

DISPOSAL ICON RECTIVE 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 4 July 2012 on waste electrical and electronic equipment (WEEE) (OJ L 197, 24.7.2012, p. 38–71,with changes)

ICON DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (OJ L 174, 1.7.2011, p. 88–110, with changes) COMMISION DELEGATED DIRECTIVE (EU) 2015/863 of 31 March 2015 amending Annex II to Directive 2011/65/EU of the European Parliament and of the Council as regards the list of restricted substances DIRECTIVE (EU) 2017/2102 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 November 2017 amending Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment

Information
The device, as a part of professional CCTV system used for surveillance and control, is not designed for self installation in households by individuals without technical knowledge. Excluding of responsibility in case of damaging data on a disk or other devices: The manufacturer does not bear any responsibility in case of damaging or losing data on a disk or other devices during device operation.

WARNING!
PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT DESCRIBED FOR THE GIVENPRODUCT IN USER’S MANUAL AND OTHER DOCUMENTS DELIVERED WITH THE PRODUCT, OR IF IT DOES NOT ARISE FROM THE USUAL APPLICATION OF THE PRODUCT, MANUFACTURER MUST BE CONTACTED UNDER THE RIGOR OF EXCLUDING THE MANUFACTURER’S RESPONSIBILITY FOR THE RESULTS OF SUCH AN ACTION.

IMPORTANT SAFEGUARDS AND WARNINGS

WARNING!
THE KNOWLEDGE OF THIS MANUAL IS AN INDESPENSIBLE CONDITION OF A PROPER DEVICE OPERATION. YOU ARE KINDLY REQUSTED TO FAMILIRIZE YOURSELF WITH THE MANUAL PRIOR TO INSTALLATION AND FURTHER DEVICE OPERATION.

WARNING!
USER IS NOT ALLOWED TO DISASSEMBLE THE CASING AS THERE ARE NO USER-SERVICEABLE PARTS INSIDE THIS UNIT. ONLY AUTHORIZED SERVICE PERSONNEL MAY OPEN THE UNIT INSTALLATION AND SERVICING SHOULD ONLY BE DONE BY QUALIFIED SERVICE PERSONNEL AND SHOULD CONFORM TO ALL LOCAL REGULATIONS

Prior to undertaking any action please consult the following manual and read all the safety and operating instructions before starting the device.
Please keep this manual for the lifespan of the device in case referring to the contents of this manual is necessary;
All the safety precautions referred to in this manual should be strictly followed, as they have a direct influence on user’s safety and durability and reliability of the device;
All actions conducted by the servicemen and users must be accomplished in accordance with the user’s manual;
The device should be disconnected from power sources during maintenance procedures;
Usage of additional devices and components neither provided nor recommended by the producer is forbidden;
Mounting the device in places where proper ventilation cannot be provided (e. g. closed lockers etc.) is not recommended since it may lead to heat build-up and damaging the device itself as a consequence;
Mounting the device on unstable surface or using not recommended mounts is forbidden. Improperly mounted switch may cause a fatal accident or may be seriously damaged itself. Switch must be mounted by qualified personnel with proper authorization, in accordance with this user’s manual;
Device should be supplied only from a power sources whose parameters are in accordance with those specified by the producer in the device’s technical datasheet. Therefore, it is forbidden to supply the switch from a power sources with unknown parameters, unstable or not meeting producer’s requirements;
Signal and power cables should be placed in a way excluding the possibility of damaging them by accident. Special attention must be paid to cables getting from the switch and connecting the power supply;
Electric installation supplying the device should be designed to meet the specifications given by the producer in such a way that overloading is impossible;
User can not repair or upgrade the equipment himself. All maintenance actions and repairs should be conducted only by qualified service personnel;
Unplug the switch from the power source immediately and contact the proper maintenance department when the following occurs:
- Damages to the power cord or to the plug itself;
- Liquids getting inside the device or exposure to strong mechanical shock;
- Device behaves in a way not described in the manual and all adjustments approved by the manufacturer and possible to apply by user himself, seem not to have any effect;
- Switch is damaged;
- Atypical behaviour of the switch components may be seen (heard).
In necessity of repairs attention to using only original replacement parts (with their parameters in accordance with those specified by the producer) should be paid. Non licensed service and nongenuine replacement parts may cause fire or electrocution;
After maintenance activities tests should be run to ensure proper operation of all the functional components of the device.

FOREWORD INFORMATION

PACKAGE CONTENTS

24 port PoE+ Switch,
Power cord
User’s manual.
Rack mount accesories

MAIN CHARACTERISTICS

24 x 10/100 Mbps PoE+ ethernet ports support IEEE 802.3af/at standards, it can provide 30W consumption and power supply to the big consumption camera with infrared or heater.
2 x Combo UPLINK: 1000Mb/s SFP + RJ45 , they can be connected with NVR and other high bandwidth device.
Fast and easy installation.

FEATURES AND SPECIFICATION

SPECIFICATION

GENERAL

Device Type| PoE+ Switch
NETWORK
Ports| PoE+ Ports: 24 x 10Mb/s / 100Mb/s (the number of ports simulta- neously operating with PoE + mode is limited by PoE budget ),
Uplink Combo x 2 :SFP(1Gb/s) + RJ45(1Gb/s)
PoE standards| IEEE802.3af, Class 3, IEEE802.3at, Class 4
PoE modes| Endspan (1,2+ / 3,6-)
Switching capacity| 8.8 Gb/s
Protocols Support| IEEE 802.3 10BASE-T, IEEE 802.3i 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-SX\LX
MAC ADDRESS list| 16K
FUNCTIONS
CCTV| Extended mode switch that increases the data and power transmis- sion distance up to 200m (Using 10Mb/s bandwidth)
Additional operating modes| VLAN, Extended
INSTALLATION PARAMETERS
RACK Mount 19″| 1U
Case| Metal, color navy blue
Dimensions (mm)| 320 (W) x 44 (H) x 207 (L)
Weight| 2.2 kg
Input Voltage| 100 ~ 240 VAC, 50/60Hz
Power Consumption| 370 W (maximum)
PoE Budget| 360 W for ports 1 to 16, up to 30 W for one port
Operating Temperature| 0°C ~ 40°C