SpeaKa Professional SP-DS-100 TV Wall Mount Instruction Manual
- June 1, 2024
- Speaka PROFESSIONAL
Table of Contents
SpeaKa Professional SP-DS-100 TV Wall Mount
PARTS
HARDWARE TOOLS
Specifications
| Item Number | 2986497 |
|---|---|
| Model | SP-DS-100 |
| VESA Compatible | 200×200, 300×200, 300×300, 400×300, 400×400, 600×400, 600×600 |
Installation Overview
- Align the mount and detach the plate as indicated by the arrow.
- Install the wall mount using the provided screws and ensure it is securely fastened to the wall.
- Attach the mount to the back plate with the appropriate screws.
- Choose the correct screw length for attaching the display to the mount, avoiding screws that are too long or too short.
- Hang the display onto the wall mount and lock it into place.
- Ensure the display is securely attached and can rotate from landscape to portrait orientation without risk of falling.
Important Safety Instructions
- Ensure the wall mount is securely fastened to the wall to prevent accidents.
- Verify all screws and components are tightened and secure before attaching the display.
- For safety, it’s recommended to mount the display and the mount base firmly attached to the wall to prevent accidents.
- Rotate the display between landscape and portrait positions with care to maintain stability.
NOTE: To ensure safety at all times it is recommended that the mount be firmly attached to the mounting plate and wall. Also, ask another person for assistance whenever ransitioning from Landscape to Portrait positions.
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- This product is designed to be installed on solid concrete walls, masonry walls or wood stud walls.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury. ation. If any parts are missing or faulty. contact vour place of purchase for a replacement.
MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at least every three months).
FAQ
What should I do if I'm unsure about the screw sizes when mounting the display?
Refer to step 4 in the installation overview which advises to select screws that are neither too long nor too short for mounting the display.
Can this mount accommodate different VESA sizes?
Yes, the SP-DS-100 model is compatible with various VESA sizes ranging from 200x200 to 600x600.
Is it possible to rotate the display from landscape to portrait orientation?
Yes, the mount allows for rotation between landscape and portrait orientations, but ensure the monitor is securely attached before rotating.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>