SpeaKa SP-MM-710 Wall Mounted Monitor Holder and CPU Holder Set Instruction Manual
- June 3, 2024
- SpeaKa
Table of Contents
SpeaKa SP-MM-710 Wall Mounted Monitor Holder and CPU Holder Set
Safety Instructions
SP-MM-710 Wall Mounted Monitor Holder and CPU holder set
Item no: 2588303
Intended use
The product is a monitor and computer holder set. The monitor holder is intended to carry one monitor and must be mounted on a vertical wall. The computer holder is intended to hold the computer that is connected to the monitor and can be mounted on a wall. If you use the product for purposes other than those described, the product may be damaged. Improper use can result in hazards. The product complies with the statutory national and European requirements. For safety and approval purposes, you must not rebuild and/or modify the product. Read the safety instructions and any accompanying instructions carefully and store them in a safe place. Make this product available to third parties only together with the safety instructions and any accompanying instructions. All company names and product names are trademarks of their respective owners. All rights reserved.
Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Fol-low the instructions on the website.
Description of symbols
The following symbols are on the product/appliance or are used in the text:
- The symbol warns of hazards that can lead to personal injury.
- The symbol warns of dangerous voltage that can lead to personal injury by electric shock.
Safety instructions
Read this document and the accompanying operating instructions carefully and espe-cially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal in-jury or damage to property. Such cases will invalidate the warranty/guarantee.
General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.
Sharp edges
- Edges of the product can be sharp and cause cuts if touched or rubbed against. Handle sharp edges very carefully. If necessary, wear protective gloves.
Drilling
When penetrating the surface (example: drilling or inserting fasteners), make
sure no cables or pipes are damaged. Inadvertently penetrating electric cables
causes the life-threatening danger of an electric shock! Check for concealed
wires and pipes before drilling or inserting fasteners.
Before assembly and installation
- Verify that the delivery content is complete before assembling the monitor holder and accessories. Do not assemble if any parts are missing.
- Prevent damage to the monitor. Refer to the manufacturer instructions that came with the monitor to find out how and where to attach a monitor holder or monitor mount.
- Handle the monitor and screen with care. Always lay the monitor flat and use a pad or cloth to protect the table surface and monitor from damage.
Installation location
- Select installation locations for the monitor holder and the accessories that facilitate safe and ergonomic use.
Assembly and installation
- If you are in any doubt, do not carry out the installation yourself; ask a qualified person to do it for you.
- Large and heavy monitors, mounts, and accessories can cause personal injury. Ask a second person to help with the installation.
- Apply your full concentration when carrying out the installation. A lack of attention or distraction can cause the monitor, monitor holder, and accessories to fall down and cause personal injury and product damage.
- Do not dismantle or convert the monitor holder. Some monitor holders contain highly pre-stressed metal springs that can cause severe injury when they are released. Carry out only the work on the monitor holder that is necessary to install it.
- Screws must provide sufficient hold to prevent the monitor from falling down. The screws must be sufficiently screwed into the threaded fixture holes on the monitor and tightened. Use screws of the correct thread type, length, and strength. In case of doubts, contact a specialist.
- Lay cables in such a way that they do not get jammed or kinked in your setup. Properly secure cables.
Wall mounting
- The wall to which the monitor holder is mounted must be able to carry the combined weight of the monitor holder, attachments, and the monitor. Use installation materials (example: screws, dowels) that are suitable for the wall. If you are in doubt, ask a specialist before installation.
- The wall to which accessories are mounted must be able to carry the combined weight of accessories and their loads. Use installation materials (example: screws, dowels) that are suitable for the wall. If you are in doubt, ask a specialist before installation.
Use
- Do not overload the monitor holder. Pay attention to the details provided by the manufacturer for the maximum monitor weight and monitor size.
- Do not overload accessories. Pay attention to the details provided by the manufacturer for the maximum loads.
- Do not adjust the monitor or monitor holder with force to prevent damage. Do not press against the monitor when making adjustments.
- The monitor holder is intended to carry the monitor and any accessories that belong to the holder. Do not hang or fix other objects to the monitor holder. The monitor holder can collapse or fall and cause injury.
- Do not use the monitor holder to support yourself. The monitor holder can fall down and cause injury.
- Do not use accessories to support yourself. Do not sit on accessories. Accessories can fall down and cause injury.
Maintenance
Adjusting the positions of the monitor and the monitor mount can cause the screws to become loose over time. Check all the screw fittings from time to time.
Technical data
- Monitor size …………………………………….. 43.2 cm (17″) – 81.3 cm (32″)
- Max. load capacity – Monitor holder …….. 8 kg
- Monitor holder weight ……………………….. 9.4 kg
- Max. load capacity – Keyboard tray …….. 1 kg
- Max. load capacity – CPU holder ………… 10 kg
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing. Copyright by Conrad Electronic SE. *2588303_V1_0722_jh_ss_en 592865931-2 I1/O1 en.