FIAMMA 08754-01A Bike Carrier Bars Instruction Manual
- June 10, 2024
- FIAMMA
Table of Contents
FIAMMA 08754-01A Bike Carrier Bars
Product Information: Bike Carrier Bars
The Bike Carrier Bars are designed to securely transport bicycles on the back of a vehicle. This product is compatible with the Carry-Bike DJ kit for the Fiat Ducato, and can accommodate up to four bicycles. The package contents include two A-bars, four B-bars, two C-bars, one D-bar, two E-bars, two F-screws, four G-screws, and four H-screws. The maximum load capacity of the Bike Carrier Bars is 60 kg.
Installation Instructions
Note: Consult the website for instructions in other languages (NL-SV- DA-NO-FI-PT).
- Check that all parts are included and undamaged.
- Attach the A-bars to the vehicle using the included screws.
- Attach the B-bars to the A-bars using the included screws.
- Attach the C-bars to the B-bars using the included screws.
- Attach the D-bar to the C-bars using the included screws.
- Attach the E-bars to the D-bar using the included screws.
- Attach the F-screws to the E-bars.
- Attach the G-screws to the A-bars.
- Attach the H-screws to the C-bars.
- Affix the labels to the Carry-Bike rails.
- Load bicycles onto the Bike Carrier Bars, ensuring that they are securely fastened.
Note: We recommend that installation is carried out by qualified personnel and in compliance with current local regulations. Contact the dealer if you have any questions orconcerns.
Product Usage
When using the Bike Carrier Bars, ensure that the load does not exceed the maximum load capacity of 60 kg. Tighten all screws to a maximum of 1.5 Nm. Always check that the bicycles are securely fastened before driving. If you experience any issues with the product, refer to the warranty information in the user manual.
Note: Keep the user manual handy for future reference.
Package contents
Check that nothing has been damaged or deformed during transport. In the event of doubts or questions concerning the installation, use or limitations of the product, contact the dealer. We recommend that the installation is carried out by qualifi ed personnel and in compliance with current local regulations.
Tightening
max 1,5 Nm
Attention: keep the following labels and affi x them to the Carry-Bike rails.
Warranty Fiamma
In case of defects with regards to materials and manufacturing, the customer
is entitled to the warranty in accordance with local laws and regulations of
the country in which the product was purchased.
Fiamma S.p.A. – Italy
Via San Rocco, 56
21010 Cardano al Campo (VA)
All rights reserved.
Fiamma S.p.A.
reserves the right to modify at any time, without notice, prices, materials,
specifications and models or to cease production of any model.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>