THEMIS FL-SPT82 Solar Pedestrian Post Top Light Instruction Manual

FL-SPT82 Solar Pedestrian Post Top Light

Product Information: Solar Pedestrian Light / Post Top Light

The Solar Pedestrian Light is designed to provide reliable lighting performance in places where grid-power is not easily accessible. It comes with a monocrystalline solar panel and a solar charge controller for efficient charging of the light. With the help of a remote control, it allows users to choose between two preferred colors and adjust the power brightness. Motion detection mode is recommended for use to save energy during continuous cloudy days or weak sunshine in winter. The light is nature-friendly and is the best choice to light up gardens. The solar pedestrian light has a maximum luminous output of 2,800lm and a color temperature of 3000K+4000K. The fixture is available in black or gray (RAL 7016) color, and its pole diameter is 76mm to fit the light holder. The package contains a complete system with an integrated controller (1 pc), light holder (1 pc), M840 screws (4 pcs), M816 screws (2 pcs), remote control (1 pc), AAA battery (2 pcs), user manual (1 pc), and screwdriver (1 pc).

Note: that the pole is not included in the package.

Product Usage Instructions

1. Use the T-shaped Allen wrench to attach the light holder to the light body using four M8*40 screws. Make sure it is installed tightly.
2. To match the remote and light into one same group, push the MATCH button of the remote and hold it. Turn on the light by pushing down the light button. The light will blink once within 3 seconds, indicating that the MATCH operation is successful.
3. Press the AUTO button, then the light will start to work automatically from dusk to dawn. Choose the preferred light color first, then adjust the light brightness or switch to motion detection mode, and set the working hours to change the default working mode.
4. Place the ready light head on the pole and tighten the two M8*16 screws with T-shaped Allen wrench.

Note: that the remote control can be used to set the color as 3000K warm white or 6000K cool white. It can also increase or decrease the light power by 20% per stage and reset the light to work for a whole night as default working mode (17 hours max). Additionally, induction mode is available where the light will work with 30% power and work with 100% power for 30 seconds when it receives the signal from the remote control successfully. It is recommended to use motion detection mode to save energy during continuous cloudy days or weak sunshine in winter. The light is nature-friendly and is the best choice to light up gardens.

SOLAR PEDESTRIAN LIGHT / POST TOP LIGHT

The designing purpose of this solar pedestrian light is to light up the places there grid-power is not easily accessable. It is able to provide very reliable lighting performance even if the solar condition is very challenging. With the helpf of remote control, it makes the light very flexible to meet different lighting requirements, customer can choose the prefered color between two colors , and to adjust the power brightness . Motion detection mode is recommended to be used in order to save more energy when there are continuous cloudy days or sunshine is very weak in winter. This solar pedestrian light is the best choice to make your garden nature-friendly living.

Main Specification

• Monocrystalline solar panel: 42Watts 18V
• LifeP04 battery capacity: 154WH 12.8V
• Solar charge controller: 95% MPPT
• LED power consumption: 18Watts max
• Lumimous output (Im): 2,800Im max
• Color temperature: O3000K+4000K / O3000K+6000K
• Fixture color: Black / OGray(Ral 7016)
• Remote control: 2.4G
• Pole diameter to fit: p76mm
• Certificates: CE, ROHS

Materials in Package

1. LIGHT HEAD: It is a complete system, battery,solar panel, controller are integrated as one unit. (1 pc)
2. LIGHT HOLDER: The best pole diameter is 76mm to fit it. (1 pc)
3. *M840 SCREWS:** It is used to connect the light head and light holder. ( 4 pcs)
4. *M816 SCREWS:** It is used to tighten the ight head to pole. (2 pcs)
5. REMOTE CONTROL (1 pc)
6. AAA BATTERY (2 pcs)
7. USER MANUAL (1 pc)
8. SCREW DRIVER (1 pc)

Remark: Pole is not included in the package.

Remote Control

This remote is used to adjust the lighting power and select the light color etc as you require. if the sunshine in your city is very good, then you can set the light with a higher power if there are continuous cloudy days, or in winter with less sunshine, then you can lower the power to save energy. In summer you can set cool white ( or daylight) and in wintertime, you can set warm white, if you want to save more energy, then you can activate the motion detection mode, then the light will work at 100% instead of 30%when the light detects movement. This is very useful for the area where is a lack of sunshine.
The working time also can be adjusted as 4 hours,6 hours, and 12 hours optional, if you want to save energy and do not want the light to work after you sleep, then you can press”4H” or “6H” to set the time. lf you need the lighting therefor a full night, then you press “12H”, the light can work up to 16 hours if winter night is longer than summer night. Please always set the light power first, then press the time set as the last step. lf you do not remember how many hours you set just now, then press the “RESET” button to have the default setting.

Warm Notice

• The light will blink one time when it receives the signal from the remote control successfully.
• The on/off button of the light should be at ON position before using the remote control.

How to install the light

1st step: Use the T shaped allen wrench to attach the light holder to light body by 4pcs of M8*40 screws. Make sure it is installed tightly.

2nd Step: Push the “MA TCH” butt on of the re mot e and keep holding it, meanwhile, Turn on the light by pushing down the light button. The light will blink once within 3 seconds which means the MATCH operation is successfully done. Press the “ AUTO” button, then the light will start to work from dusk to dawn automatically. You can choose the preferred light color first, then adjust the light brightness or switch to motion det ection mode, then set the working hours to change the default working mode.

3rd Step: Put the ready light head on the pole and tighten the two M8*16 screws with T shaped Allen wrench

What is “match”?

Match operation is to link the light and remote into one same group. This allows you to use one remote to control multi-solar lights without interfering with the other lights nearby. The remote will not be functional to the solar pedestrian light if you do not do the match operation.
Note:

1. Please set the working hours at the last step.
2. The lighting program could be also easily adjusted when the light is installed on the pole, but the “matching” operation must be done before installation.
3. Default working mode: 3 hours 100% + 4 hours 40% + 10 hours 20% + 40% when sensor is triggered ( total 17 hours).

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>