PoP voice K3S Mini Wireless Lavalier Microphone User Guide

PoP voice K3S Mini Wireless Lavalier Microphone

Product Information

Specifications

• Two Microphone Transmitters
• 3-in-1 Multi-functional Receiver
• USB Adapter
• Type-C Charging Cable
• User Manual

Product Usage Instructions

Using the Microphone and Receiver

1. Step 1: Ensure both devices are fully charged before use.
2. Step 2: Long press the power button on both the microphone and the receiver to turn them on. They will automatically pair, and the indicator lights will turn solid green.
3. Step 3: Plug the receiver into your device, and you’re ready to go.
4. Special Tip: Plugging the charging cable into the receiver’s Type-C port allows simultaneous charging of your phone while recording.

Connecting to Laptop & Desktop

1. Step 1: Open the Input tab. If using the USB adapter, select USB Audio 1.0. If using the 3.5mm connector, select Realtek High Definition Audio. Adjust the volume using the slider.
2. Step 2: Open the Recording tab. If using the USB adapter, select USB Audio 1.0. If using the 3.5mm connector, select Realtek High Definition Audio. Adjust the volume using the slider

Mic Functionality

• Power on: Long press mic’s power button.
• Power off: Long press mic’s power button.
• Noise Reduction: DSP automatic noise reduction.

Receiver Functionality

• Power On: Long press receiver’s power button
• Power off: Long press receiver’s power button.

Lighting & TYPE-C Receiver Functionality

Frequently Asked Questions (FAQ)

Q &A

• Q: How do I know if the microphone and receiver are paired?
  A: Plug headphones into the receiver, speak into the microphone, and listen through the headphones. Conduct a recording test.

User Manual

ID Diagram

1. Windscreen
2. Microphone Indicator Light
3. Microphone Charging Port
4. Microphone Clip
5. Microphone Power Button
6. Receiver Charging Port
7. Receiver Power Button
8. Receiver Indicator Light
9. TRRS Connector
10. Lightning Connector
11. TYPE-C Connector
12. Headphone Jack

Quick Start Guide:

• Note : Ensure both devices are fully charged before use.
• Step 1: Long press the power button on both the microphone and the receiver to turn them on. They will automatically pair, and the indicator lights will turn solid green.
• Step 2: Plug the receiver into your device, and you’re ready to go.
• Special Tip : Plugging the charging cable into the receiver’s Type-C port allows simultaneous charging of your phone while recording.

3.5 mm Connector & USB Adapter Schematic

Please follow the steps before using the mic on laptop & desktop

Operation om MAC OS

1. Click on the Apple symbol at the top left of your screen and select System Preferences.
2. Click on “Sound” to open the sound options.
3. Open the “Input” tab.
   • If using the USB adapter, select “USB Audio 1.0.”
   • If using the 3.5mm connector, select “Realtek High Definition Audio.”
   • Adjust the volume using the slider.

OPERATION ON WINDOWS

1. Open the Start menu and click on “Control Panel”.
2. Open the “Sound” preferences within the Control Panel folder.
3. Open the “Recording” tab.
   • If using the USB adapter, select “USB Audio 1.0.”
   • If using the 3.5mm connector, select “Realtek High Definition Audio.”
   • Adjust the volume using the slider.

Function introduction

Microphone Functionality:

fully charged
Noise Reduction| DSP automatic noise reduction
Mute| Press 5 mic’s power button once| Green light blinking
Reverb| Press 5 mic’s power button thrice quickly| Red light blinking once, then solid green light

Tip: The microphone will automatically power off if not paired with the receiver within 1 minute

3.5 mm Receiver Functionality

fully charged
Amplifier Mode| Press 7 receiver’s power button once| Navy blue light always on
Mobile Devices Mode| Press 7 receiver’s power button once| Green light always on
Sound Card Camera Mode| Press 7 receiver’s power button once| Bright Blue always on

Tip: Modes may vary depending on different devices, it won’t restrict device usage.
Select the optimal mode based on your device.

Lighting & TYPE-C Receiver Functionality

fully charged

Packing list

1. Two Microphone Transmitters
2. 3-in-1 Multi-functional Receiver
3. USB Adapter
4. Type-C Charging Cable
5. User Manual

Q &A

• Q: How do I know if the microphone and receiver are paired?

1. A:Plug headphones into the receiver, speak into the microphone, and listen through the headphones.
2.  Conduct a recording test.

• Q: The microphone doesn’t work on my Android phone.

1. A: Enable “OTG” function on your phone (if available).
2. Navigate to Settings > Sound & Vibration > Other settings > Default Recorder > Use Peripheral Device.
3. Use the “Open Camera” app for recording.
4. If the above steps don’t solve the issue, contact customer service for assistance.

• Q: The microphone doesn’t work on iPhone, camera, or computer
  A: Contact customer service for assistance.

• Q: How do I monitor the audio?
  A: Plug headphones into the 3.5mm audio jack on the receiver. Due to the transmission path from the microphone to the receiver and then to the headphones, there might be slight audio delay.
  Other notes:

1. The receiver’s plug has limited length and may not fully insert into a phone with a thick case or on uneven surfaces.
2. This Three-in-One wireless microphone does not block the device speakers.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>