Terrestrial EU005 DVB-T2/C TV REC Box User Guide

June 3, 2024
Terrestrial

Terrestrial-EU005-DVB-T2-C-TV-REC-Box-logo

Terrestrial EU005 DVB-T2/C TV REC Box

Terrestrial-EU005-DVB-T2-C-TV-REC-Box-product-image

Packing list

Terrestrial-EU005-DVB-T2-C-TV-REC-Box-01

Functional Port

Upgrade to DVB-T2

Terrestrial-EU005-DVB-T2-C-TV-REC-Box-03

Attention

  1. Insert 2 AAA batteries (not included) into your remote

DVB Remote Control

Terrestrial-EU005-DVB-T2-C-TV-REC-Box-05

  • POWER: turn ON/OFF the DVB device

TV Control

  • POWER: turn ON/OFF the TV
  • SET: auto-learning setting

MEDIA Control

  • Show the REC media via the USB device
  • Switch 720P or 1080P
  • Switch 16:9 or 4:3
  • Book listing control
  • Show the subtitles (if available)
  • Skips to the previous channel

MENU Control

  • Electronic guide (if available)
  • Info of the channel
  • MENU: open the main menu
  • EXIT: Exit from a menu

MORE Control

  • AUDIO: selects the language of the channel
  • TTX: teletext ( if available)
  • FAV: creates and shows the list of

Remote Auto -learning Set

Only these 4 keys of DVB remote can be learned,

All these keys can be set up via steps 1~5
Terrestrial-EU005-DVB-T2-C-TV-REC-Box-08

Troubleshooting

Problem Possible cause Solutions
The front panel display does not turn on Lack of tension Make sure the power

cord is properly inserted into a powered outlet Verify that the switch is turned on
No image or sound| The cables connecting the TV and the decoder are not connected correctly| Check that the output signal cable is well connected (SCART or HDMI). Also check the antenna cable.
TV mode is incorrect| Make sure you have selected the correct input signal on the TV (SOURCE or INPUT key on the TV remote control)
Incorrect video definition| Press V-FORMAT on the remote control and select a video resolution that allows correct viewing
Intermittent t picture and audio| Insufficient signal strength| Check that the antenna cable is well connected, and that the quality of the video signal is adequate.
Electrical interference| Check that the antenna cable is completely shielded
No audio| The receiver or TV is in silent mode| Disable silent mode using the MUTE button
Volume level too low| Check that the volume level of the set-top box and television are adequate
Audio CODEC is not supported| While watching multimedia content, audio encoding may not be supported (while video encoding may be) and movies may appear without audio. The file is not completely readable.
Remote control not working| Batteries not inserted| Insert the batteries into the remote control
Low battery| Replace the batteries
Polarity reversal of batteries| Check that the batteries have been inserted according to their correct polarity, as indicated on the bottom of the battery compartment.
The remote control is out of its operating range| Approach and point the remote control directly at the appliance.
Media files on the USB stick are not played| The files are not of the supported format| Only some formats are supported
The compression codec is not supported| Only some codecs are supported

Contact us for help: dcolorteam@gmail.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals