amazon A2B Tracking Device User Manual
- June 1, 2024
- Amazon
Table of Contents
amazon A2B Tracking Device
Key Components
- MCU : nRF52833
- Accelerometer: LIS2DW
Electrical Parameters
| Parameter | Value |
|---|---|
| Battery power supply | 1x Li-SOCl2 3.6V battery |
| Power Consumption (Battery) | Up to 135mA @ 3.6V |
| Operating temperature | 2.5uA |
Mechanical Parameters
| Parameter | Value |
|---|---|
| Dimensions | Without the bracket: Max. 174.8 x 56.2 x 25.7 mm (6.88 x 2.21 x |
1.01 in)
With the bracket: Max. 200.8 x 113.1 x 33.1 mm (7.91 x 4.45 x 1.30
in)
Weight| Without the bracket: 120g
With the bracket: 370g
Overview
The Amazon A2B device is used as a tracking device for the GoCart containers
in Amazon middle-mile logistics.
It uses various RF technologies like RFID and 2.4GHz to determine the
positions of the tracked asset. Besides that, it provides additional
functionalities like red-tagging of the asset, temperature, and orientation
monitoring. The device has been designed to be maintenance-less and should be
able to operate for at least 5 years.
Key Features
- Supports passive RFID inlay tag.
- Supports 2.4GHz advertising in 3 formats: Eddystone TLM, Eddystone UID, and Amazon A2B format.
- Battery lifetime of 5 years using a non-rechargeable battery.
- Battery options: 1x Li-SOCl2 3.6V battery (compliant with the safety regulations defined by IEC 60086-4, UL 1642, UL 2054, UN38.3 or equivalent).
- Integrates an RGB LED, a multifunctional Front Button, and extra GPIOs for connection with external sensors or IOs.
Specifications
This section provides technical details of the Amazon A2B device.
Key Components
- Based on the MCU nRF52833
- LIS2DW accelerometer.
Electrical Parameters
| Parameter | Value |
|---|---|
| Battery power supply | 1x Li-SOCl2 3.6V battery |
| Power Consumption (Battery) | Up to 135mA @ 3.6V |
| Operating temperature | -30°C ~ +85°C |
| --- | --- |
| Current consumption in deep sleep | 2.5uA |
Mechanical Parameters
| Parameter | Value |
|---|---|
| Dimensions | Without the bracket: |
Max. 174.8 x 56.2 x 25.7 mm
(6.88 x 2.21 x 1.01 in)
With the bracket:
Max. 200.8 x 113.1 x 33.1 mm
(7.91 x 4.45 x 1.30 in)
Weight| Without the bracket: 120g With the bracket: 370g
Front Button| Covered by a TPE that allows flexible press and pass-through of
the LED light
User Interface
Button
Supports actions of short and long press. Functions of the multi-purpose
button are described in the sections below.
- Short press – device status check. The LEDs will indicate that the device is running. The green LED will blink when the remaining battery capacity is sufficient. The red LED will blink when the remaining battery capacity is low.
- Long press – enable maintenance request. The RED LED, if enabled in site configuration, will indicate the device is requiring maintenance. A repeated Long press will clear the maintenance request.
LEDs: The device contains Red, Green, and Blue LED indicators. The meanings of the multi-purpose LEDs are described in the sections below.
- Normal operation mode
- After a short press to check the device status and battery capacity is sufficient
- Green: 2000 ms BLINK (1:10 duty cycle). Blinking will stay for 30 s.
- After a short press to check the device status and battery capacity is low
- Red: 2000 ms BLINK (1:10 duty cycle). Blinking will stay for 30 s.
- After a long press to enable maintenance request
- Red: 2000 ms BLINK (1:10 duty cycle). Blinking will stay for 5 min.
Mounting Instructions
Safety Instructions
Battery Safety
This product contains a Lithium Battery.
Do not open, disassemble, puncture, cut, bend, shred or heat the batteries.
Dispose of all batteries in accordance with applicable laws and regulations
and do not dispose of batteries by throwing them into a fire.
WARNINGS AND CAUTIONS FOR PRODUCTS USING BATTERIES:
- high or low extreme temperatures that a BATTERY can be subjected to during use, storage or transportation; and
- low air pressure at high altitudes.
- disposal of a BATTERY into fire or a hot oven, or mechanically crushing or cutting of a BATTERY, that can result in an EXPLOSION;
- leaving a BATTERY in an extremely high temperature surrounding environment that can result in an EXPLOSION or the leakage of flammable liquid or gas; and
- a BATTERY subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
- BATTERY is not intended for replaceable.
Compliance Information
Simplified declaration of comformity：
Hereby, Amazon.com Services LLC declares that the radio equipment type A2B Tag
in compliance with
Directive 2014/53/EU.
Hereby, Amazon.com Services LLC declares that the radio equipment type A2B Tag
in compliance with
Regulation 2017.
The full text of the Declaration of Conformity at loose leaf.
Environmental Protection and disposal
Electrical or electronic devices that are no longer usable must be
collected separately and disposed of via an environmentally friendly recycling
facility (European Directive on Waste Electrical and Electronic Equipment).
Use your country’s specific return and collection systems when disposing of
waste electrical or electronic devices.
Used batteries do not go into household waste! Dispose of them at your local battery collection point
FCC
FCC Regulation
FCC Supplier’s Declaration of Conformity Brand name/model number:
- Amazon / A2B001-V1 Suppliers Name: Amazon.com Services LLC Suppliers
- Address: 333 108th Ave NE, Bellevue 98004, Washington, U.S.A
- Phone: 1-678-293-8382
- E-mail: lux14-reception@amazon.com
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Ⓒ 2024 Amazon.com Amazon A2B User Manual (January-2024, v0.3 Preliminary)
FAQ
Q: What battery options are compatible with the Amazon A2B device?
A: The Amazon A2B device supports a non-rechargeable 1x Li-SOCl2 3.6V battery that complies with safety regulations defined by IEC 60086-4, UL 1642, UL 2054, UN38.3, or equivalent.
Q: How long is the battery lifetime of the Amazon A2B device?
A: The battery lifetime of the Amazon A2B device is approximately 5 years when using the specified battery.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>