Danfoss Aero RA Series Click Thermostatic Sensor Installation Guide

June 10, 2024
Danfoss

Danfoss Aero RA Series Click Thermostatic Sensor

Product Information

The product is a device with the code number 013G1246 or 013G1236 (depending on the model) and the blind mark AN446274064324en-000101. The device has a maximum setting of 4 and a minimum setting of 2. The installation guide provides instructions on how to set up the device.

Product Usage Instructions

  1. Before installation, ensure that you have the correct device with the code number and blind mark specified in the manual. Set the maximum value by turning the device to the right until it reaches the number 4.
  2. Set the minimum value by turning the device to the left until it reaches the number 2.

Note that the device should only be used within the specified minimum and maximum settings. Using the device beyond these settings may result in damage to the product or other equipment.

Installation

Danfoss-Aero-RA-Series-Click-Thermostatic-Sensor-fig-1

BIV Installation

Danfoss-Aero-RA-Series-Click-Thermostatic-Sensor-fig-2

Uninstall

Danfoss-Aero-RA-Series-Click-Thermostatic-Sensor-fig-3

Temperature Limitation

Danfoss-Aero-RA-Series-Click-Thermostatic-Sensor-fig-4 Danfoss-Aero-RA-Series-Click-Thermostatic-Sensor-
fig-6 Danfoss-Aero-RA-Series-Click-
Thermostatic-Sensor-fig-7

Shut off

Danfoss-Aero-RA-Series-Click-Thermostatic-Sensor-fig-8

Theft protection

Danfoss-Aero-RA-Series-Click-Thermostatic-Sensor-fig-9 Danfoss-Aero-RA-Series-Click-Thermostatic-Sensor-
fig-10

Blind mark

Danfoss-Aero-RA-Series-Click-Thermostatic-Sensor-
fig-11

Danfoss A/S
Climate Solutions danfoss.com +45 7488 2222 Any information, including, but not limited to information on selection of product, its application or use, product design, weight, dimensions, capacity or any other technical data in product manuals, catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, online or via download, shall be considered informative, and is only binding if and to the extent, explicit reference is made in a quotation or order confhrmation. Danfos cannot accept any responsibility for possible errors in catalogues, brochures, videos and other material.
Danfoss reserves the right to alter its products without notice. This also applies to products ordered but not delivered provided that such alterations can be made without changes to form, fit or function of the product. All trademarks in this material are property of Danfoss A/S or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All rights reserved. Danfoss Climate Solutions |2023.03

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals