hama R1118170 TV Wall Bracket Instruction Manual
- June 2, 2024
- Hama
Table of Contents
TV Wall Bracket
Operating Instructions
R1
118170
R1118170 TV Wall Bracket
Required tools
Installation kit
| (A1) 8×60 (x4)| | (F3) (x4)
---|---|---|---
| (A2) Ø10×60 (x4)| | (D2) M8x20 (x4)
| (A3) M8 (x4)| | (D3) M8x30 (x4)
| (B1) M6 (x4)| | (D4) M8x50 (x4)*
| (B2) Ø8×10 (x4)| | (E1) M4x12 (x4)
| (B3) Ø8×20 (x4)| | (E2) M4x20 (x4)
| (C1) M6x12 (x4)| ****| (F1) (x1)
| (C2) M6x20 (x4)| | (F2) (x1)
| (D1) M8x12 (x4)| |
Thank you for choosing aHama product.
Take your time and read the following instructions and information
completely.Please keep these instructions in asafeplace for future reference.
If you sellthe device, please pass these operating instructions on to the new
owner.
Explanation of WarningSymbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention
to specific
hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Package Contents
- TV wallbracket
- Drilling template
- Installation kit (see contents, Fig. 1)
- These operating instructions
Note
Please check that the installation kit is complete before installing the
bracket and ensure that none of the parts arefaulty or damaged.
Safety Notes
Warning
- Given the multitude of terminal devices and wallstructures available on the market, the supplied mounting kit is unable to cover every option.
- It occasionally happens that the screws for attaching theterminal device to thewall bracket aretoo long.
- Please note that the supplied wallplugs arefor use with concrete brick and solid brick walls only.
- Read the operating instructions for your terminal device beforeattempting to mount it. The instructions provide information about thetype and measurements of suitable fastening materials.
- If the supplied mounting kit does not contain suitable fasteningmaterialsfor mounting the terminal device, purchase these from aspecialised dealer.
- If the wallonwhich the bracket is to be mounted is made of different material types and construction types to thoses pecified, purchase suitable mounting materials from aspecialised dealer.
- Never apply force during mounting. This can damageyour end deviceorwallbracket.
- If in doubt, have this product mounted by aqualified technician -donot attempt to mountityourself!
- Do not mount the product above locations wherepersons might linger.
- Once you have mounted the product and the attached load, check that they are sufficiently secureand safe to use.
- You should repeat this check at regular intervals(at least every three months).
- When doing so, ensurethat the product does not exceed its maximum permitted carrying capacity and that no load exceeding the maximum permitted dimensions is attached.
- Make surethat the product is loaded symmetrically.
- During adjustment, ensurethat the product is loaded symmetrically and that the maximum permitted carrying capacity is not exceeded.
- Maintain the necessary safety clearance around the attached load (dependingonthe model).
- In the event of damage to the product, remove the attached load and stop using the product.
Intended use and specifications
- The bracket is used for wall mounting flat panel displays for non-commercial, private household use.
- The bracket is only intended for use within buildings.
- Use the bracket only for the intended purpose.
| Maximum load bearing capacity: | 30 kg |
|---|---|
| Screen size: | 81.0 -165.0 cm (US: 32″ -65″) |
| Depth: | 2.5 -41.0 cm |
| Angle: | –/+ 6° |
| Pivoting range: | up to 180° on 3joints (depends on the device) |
| Wall mounting plate dimensions:2 | 2.4.0 x30.1 cm |
| Mounting holes: | according to the VESA standard until 400×400 |
Installation requirements and installation
Note
-
Only mount the TV wallbracket with the help of asecond person. Get the support and help you need.
-
Different end devices havedifferent options forconnecting cables and other devices.
Before installation, ensure that the necessary connections will still beaccessible after installation. -
The same mounting kit is included with allofour TV wallbrackets. Depending on the product and mounting type, youmay not need to use the entire mounting kit.
Unneeded screws and other smallparts may be left over,even if the wallbracket is properly mounted. Keep these leftover parts with the operating instructions in a safe place, just in case youmight need them later on (e.g. should you move, sell the product, mount the wallbracket in adifferent location, buyanew TV,etc).
Warning
-
This product is suitable for wall mounting only.
-
Before installing the bracket, ensure that the wall on which the television is to be mounted is suitable for the weight and make sure that no electrical wires, water,gas or other lines arelocated at the installation location.
-
Please note that the provided wallanchors areonly approved forconcrete and solid brick walls.
-
Observe the other warnings and safety instructions.
-
Proceed step-for-step in accordance with the illustrated installation instructions (Fig. 1ff.).
-
Check whether your television is level using the included spirit level. If necessary,adjust the television plate.
-
To adjust the inclination, loosen the side mounting screws slightly,set the desired angle and retighten the screws securely.
-
Given the multitude of terminal devices available on the market, we cannot describe all possible mounting options here.
-
Please ensurethat the bracket lays flat and evenly on the back of the television.
-
Use the enclosed spacer to even out any unevenness on the back of the television.
-
Ensure that allscrews have the proper length and can be mounted until they are hand-tight (see Fig. 4).
Setting and maintenance
Note
Only adjust the TV wallbracket with the help of asecond person. Get the
support and help you need.
Note -Adjust inclination
Loosen the side mounting screws slightly,set the desired angle and retighten
the screws securely.
- To secure, hang the TV plate and tighten both of the nuts.
- Check that the bracket is secureand safe to use at regular intervals (at least every three months). Only use water or standard household cleaners for cleaning.
Warranty Disclaimer
Hama GmbH & Co KGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/orsafety notes.
Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support
www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies.
Errors and omissions excepted,
andsubject to technicalchanges.
Our general terms of delivery and payment are applied.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>