Silver Cross 1128910 Bromley Oak Cot Bed Instruction Manual
- June 4, 2024
- Silver Cross
Table of Contents
1128910 Bromley Oak Cot Bed
Instruction Manual
IMPORTANT RETAIN FOR FUTURE REFERENCE READ CAREFULLY
Bromley Oak Cot bed
IMPORTANT: THE ASSEMBLY OF THIS PRODUCT REQUIRES TWO PEOPLE
Part List
Fitting List
The cot bed base can be fitted at three different heights. The lowest is the safest.
Warnings & Instructions For Safe Use & Maintenance
WARNING: Be aware of the risk of open re and other sources of strong
heat, such as electric bar res, gas res etc, in the vicinity of the cot/bed.
WARNING: Do not use the product if any part is broken, damaged, torn, or
missing. Approved replacement parts can be obtained from Silver Cross.
WARNING: Do not leave anything in the cot/bed, or place it close to
another product that provides a foothold or presents a danger of suffocation
or strangulation. For example strings, blind/curtain cords, etc.
WARNING: Do not use more than one mattress in the cot.
WARNING: Children are likely to play, bounce, jump and climb on beds,
therefore the child’s bed should not be placed too close to other furniture or
windows, and should be placed either tight to any wall or have a gap of 300mm
between the wall and the side of the bed.
WARNING: Do not place this child’s bed near heat sources, windows, and
other furniture.
The lowest position of the mattress base is the safest and should be used as
soon as the baby is old enough to sit up. To prevent injury from falls, when
the child is able to climb out of the cot, the cot shall no longer be used for
that child.
The thickness of the mattress chosen must not reduce the internal depth (from
mattress surface to top of the side) to less than 500mm with the base in its
lower position or 200mm with the base in its higher position. Maximum 10cm
thick mattress to be used with this cot bed.
If you leave the child unattended in the cot, always make sure that the drop
side is in the highest position.
All assembly things should be tightened properly, checked regularly, and re-
tightened as necessary.
Screws and bolts should not be loose because a child can squeeze parts of the
body, or clothing e.g string, necklaces, ribbons for babies dummies, etc.
could get caught. There would be a danger of strangulation.
The cot/bed must be used on a level and stable surface, away from electric
sockets. Once assembled do not dismantle. Never move the cot/ bed with a child
in it.
Excessive chewing may damage the wood and cause splintering. If any part is
damaged stop using it until the correct replacement part has been obtained
from Silver Cross. Your cot/bed can be cleaned by wiping with a damp cloth and
drying immediately with a soft clean cloth.
Do not use abrasives, bleach, alcohol or ammonia-based household polishes.
Take care when handling or moving furniture, careless handling can damage
wooden furniture. Wood is a natural material, the color will darken with age.
The size of the mattress to be used with the child’s bed is 1400x700mm. Cot
conforms to BS EN 716-1/2:2017 and toddler bed to BS 8509:2008+A1:2011.
Cots that convert to toddler beds are intended from birth up to approximately
4 years.
The mattress length and width shall be such that the gap between the mattress
and the sides and ends does not exceed 30mm.
Silver Cross (UK) Ltd, Micklethorn
Broughton, Skipton, North Yorkshire, BD23 3JA
silvercrossbaby.com
IND.1128910
IM-CMB-211025-01r01
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>