RAIN HARVESTING TMTG01 Maintenance Trays Installation Guide
- June 10, 2024
- Rain Harvesting
Table of Contents
RAIN HARVESTING TMTG01 Maintenance Trays
Product Information
The Maintenance Trays are designed to make maintenance easy and prevent leaves and debris from entering the tank inlet. They are mosquito-proof and come in two sizes: 300mm (code TMTG01) and 400mm (code TMTG02). The handle allows for easy removal of the mesh screen without any tools required. Simply backwash or brush off leaves to keep your tank inlet clean.
PRODUCT DETAILS
Make maintenance a breeze and keep leaves and debris out of your tank inlet with this mosquito-proof maintenance tray. The handle allows you to remove the mesh screen with one hand – no tools required. Then simply backwash or brush off the leaves to keep your tank inlet clean.
| Code | Size | Country |
|---|---|---|
| TMTG01 | 300mm | GLOBAL |
| TMTG02 | 400mm |
Installation
WHAT’S IN THE BOX?
- Maintenance Tray
MAINTENANCE TRAYS
- Clean your tank inlet screen to remove any leaves or debris. If necessary, remove your tankinlet screen to clean it thoroughly, then reinstall it.
- Place your Maintenance Tray on top of your tank inlet screen.
Product Specifications
| Code | A | B | C | D | E |
|---|---|---|---|---|---|
| TMTG01 | 11.9 | 14.2 | 10.7 | 1.5 | 2.6 |
| TMTG02 | 15.3 | 17.5 | 13.9 | 1.5 | 2.6 |
Usage Instructions
- Clean your tank inlet screen to remove any leaves or debris. If necessary, remove your tank inlet screen to clean it thoroughly, then reinstall it.
- Place your Maintenance Tray on top of your tank inlet screen.
Maintenance
You should regularly clean your Maintenance Tray to ensure the water flowing
into your rainwater tank isn’t obstructed or contaminated by leaves and
debris.
To clean, grab the handle, remove your Maintenance Tray from your tank screen
and brush away larger leaves and debris. If necessary, you can hose it off
remove any finer debris. Replace on top of your tank inlet screen.
To improve your rainwater quality, we recommend inspecting your Maintenance
Tray every 3 months or between rainfall events.
Alternatively, you may wish to consider installing a Maelstrom Filter rather
than using a Tank Screen and Maintenance Tray.
A common misconception about collecting rainwater is that all you need is a roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on to deliver the volume – or quality – of water that you require. That is where we can help. With some thought, your rain harvesting system can provide you with cleaner water and lots of it. Whether you’re completely reliant on tank water or wanting to keep the garden green, our simple steps will help you achieve your goal. The Rain Harvesting approach to rainwater collection involves using tested and proven products to make quality rainwater available for use in and around your property. You don’t need much to get started and you will be surprised how easy it is to get the most out of your rainwater system.
How can we help you?
Compliance
The Maintenance Trays comply with AS/NZS 4020:2005 for testing of products
for use in contact with drinking water.
DISCLAIMER This product specification is not a complete guide to product usage. Further information is available from Rain Harvesting Pty Ltd and from the installation and Operating instructions. This specification sheet must be read in conjunction with the installation and Operating Instructions and all applicable statutory requirement. Product specifications may change without notice. © Rain Harvesting Pty Ltd
Contact Information
For more information or assistance, please contact us at +61 7 3248 9600 or visit our website at rainharvesting.com.
For more information or to find out how we can help, just give us a call
on
+61 7 3248 9600
Or visit our website at
rainharvesting.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>