SELKIRK 6USP-L12 All-Fuel Double Wall Chimney Connector System User Manual

SELKIRK 6USP-L12 All-Fuel Double Wall Chimney Connector System

Typical Installations

MODEL USP DOUBLE-WALL STOVEPIPE

Ultimate StovePipe is designed to provide optimal wood stove performance and has a sleek, smooth, clean look to compliment any stove and home.

Double wall stovepipe is the best choice to connect a freestanding stove to a chimney system. In comparison to single wall stove pipe, it offers:

• Reduces clearance to combustible materials, 6″ versus 18″
• Reduces creosote formation
• Enhances Draft

FEATURES

• Smooth, clean appearance on all components – pipe lengths, elbows, and tees – to compliment any stove & home interior
• Sleek, smooth, clean-looking welded seams on the inner and outer
• Satin coat steel 0.018″ outer casing specifically designed for optimum paint adhesion and scratch resistance
• Stainless steel inner liner warms quickly, holds the heat in, and improves efficiency
• Air-insulated, double wall design – approximately 7/16″ air space
  • Provides better insulation & heat retention
  • Allows flue to warm up quickly to establish a strong draft
  • Reduces moisture to minimize creosote build-up & minimize maintenance
• Joints secured with screws for easy assembly and inspection
• Pre-drilled pilot holes for fast installation
• Faster start-ups lead to less smoke & less pollution in the environment
• Maintains higher flue-gas temperatures
• Results in lower outer surface temperature
• Easily fits most stoves, including cast iron stoves and stoves with oval collars
• Drip-free design to prevent creosote leakage
• Components individually packed
• Smart Choice Warranty

CERTIFICATION

• Tested & certified to CAN/ULC-S641 (Canada) and temperature requirements of UL 103 TYPE HT (USA)
• 6″ clearance to combustibles in all diameters – even when installed in a corner, or parallel with a ceiling
• NOTE – Always consult the stove manufacturer’s installation instructions for installation requirements

LENGTHS

• 6″, 7″, and 8″ diameters
• 6″, 12″, 18″, 24″, 36″, and 48″ lengths
• Easy to install and disassemble
• Hardware pack included

TELESCOPIC LENGTHS

• 6″, 7″, and 8″ diameters
• Two-piece telescoping section comprised of (1) 36″ Length and (1) 36″ Adjustable Length
• Provides installation flexibility from stove to the chimney system
• Wide Finishing Band included
• Hardware pack included

Size| Product Number| Part Number| ****

A

| B| C MIN| C MAX| D MIN| D MAX
---|---|---|---|---|---|---|---|---
6″| 276066| 6USP-TL| 6″| 6 7/8″| ****

39 1/4″

| ****

72″

| ****

35 3/4″

| ****

68 1/2″

7″| 277066| 7USP-TL| 7″| 7 7/8″
8″| 278066| 8USP-TL| 8″| 8 7/8″

ADJUSTABLE LENGTHS

• 6″, 7″, and 8″ diameters
• 6″, 12″, 18″ and 36″ adjustable lengths
• Adjustable Lengths slide over any regular length for installation flexibility
• Adjustable Lengths may be used as a Stove Adapter
• Use in a vertical and/or horizontal installation
• Hardware pack included

WIDE FINISHING BANDS

• 6″, 7″, and 8″ diameters
• Use to conceal & finish the connection between Ultimate StovePipe at ceiling support or in a through-the-wall application
• Can also be used to conceal the connecting joint at the chimney adapter
• Hardware pack included

3 1/2″

7″| 277261| 7USP-WFB| 7 7/8″
8″| 278261| 8USP-WFB| 8 7/8″

30° ELBOWS

• 6″, 7″, and 8″ diameters
• Use fixed 30° elbow to offset flue as needed
• Non-positional connection system allows 360° rotation
• Hardware pack included

45° ELBOWS

• 6″, 7″, and 8″ diameters
• Use fixed 45° elbow to offset flue as needed
• Non-positional connection system allows 360° rotation
• Hardware pack included

90° ELBOWS

• 6″, 7″, and 8″ diameters
• Use fixed 90° elbow to offset flue as needed, or in a through-the-wall installation
• Non-positional connection system allows 360° rotation
• Hardware pack included

TEES

• 6″, 7″, and 8″ diameters
• Includes Tee Cap for easy inspection & cleaning access
• Hardware pack included

MASONRY ADAPTERS

• 6″, 7″, and 8″ diameters
• For installations through a masonry wall
• Use to connect Ultimate StovePipe to an existing masonry chimney or a relined masonry chimney with stainless steel liner
• Hardware pack included

11 1/2″

|

3 1/2″

7″| 277247| 7USP-MA| 7″| 7 7/8″
8″| 278247| 8USP-MA| 8″| 8 7/8″

INCREASERS

• 4 Sizes – 5″ to 6″, 6″ to 7″, 6″ to 8″ and 7″ to 8″
• Use to increase to a larger diameter chimney system
• Hardware pack included

Note: Increasing the diameter may reduce the draft and increase creosote build-up.

REDUCERS

• 3 sizes – 7″ to 6”, 8″ to 7″, and 8″ to 6″
• Use to reduce the diameter of the system to accommodate a range of flue sizes
• Hardware pack included

Note: Check with appliance manufacturers or local code authorities for acceptable use.

LOW-PROFILE STOVE ADAPTERS

• 6″, 7″, and 8″ diameters
• Use to connect Ultimate StovePipe to a flush, recessed or standard appliance outlet
• Pair with an Adjustable Length to conceal the Low Profile Adapter & create a seamless look

2 1/2″

7″| 277249| 7USP-LPSA| 6 15/16″| 7″
8″| 278249| 8USP-LPSA| 7 15/16″| 8″

JOTUL STOVE ADAPTER

• 6″ diameter
• Use to convert Jotul flue outlets to Ultimate StovePipe

OVAL-TO-ROUND ADAPTERS

• 8″ oval diameters
• Use to convert Oval flue outlets to round Ultimate StovePipe
• Hardware pack included

15 1/4″

|

12 7/8″

8″ to 6″| 278251| 8USP-ORA6| 6″ x 10 5/8″| 6 3/4″ x 11 1/2″| 6″| 6 7/8″

IN-LINE DAMPERS

• 6″, 7″, and 8″ diameters
• Use to control the air being drawn through the chimney and to control the stove’s combustion
• Designed to be installed in a vertical run 2 to 3 feet above the stove
• Hardware pack included

Note: Check with the appliance manufacturer for recommended use.

6″

|

4 5/8″

7″| 277260| 7USP-DK| 7″| 7 7/8″
8″| 278260| 8USP-DK| 8″| 8 7/8″

ELBOW OFFSET CHART

 | 30° Elbow – 2x E30 with 1x Length|  | 45° Elbow – 2x E45 with 1x Length|  | 90° Elbow – 2x E90 with 1x Length
---|---|---|---|---|---

Size

| Pipe Length| ****

X – Offset

| ****

Y – Rise

| ****

Size

| Pipe Length| ****

X – Offset

| ****

Y – Rise

| ****

Size

| Pipe Length| ****

X – Offset

| ****

Y – Rise

6″

| 0″| 2 1/4″| 8 5/8″| ****

6″

| 0″| 4″| 9 1/2″| ****

6″

| 0″| 10 3/8″| ****

10 3/8″

6″| 4 5/8″| 12 5/8″| 6″| 7 1/4″| 12 3/4″| 6″| 15″
12″| 7 1/2″| 17 7/8″| 12″| 11 1/2″| 17″| 12″| 21″
18″| 10 1/2″| 23″| 18″| 15 3/4″| 21 1/4″| 18″| 27″
24″| 13 1/2″| 28 1/4″| 24″| 20″| 25 1/2″| 24″| 33″
36″| 19 1/2″| 38 5/8″| 36″| 28 1/2″| 34″| 36″| 45″
48″| 25″| 48 1/8″| 48″| 36 1/4″| 41 3/4″| 48″| 56″

7″

| 0″| 2 3/8″| 9 1/8″| ****

7″

| 0″| 4 1/4″| 10 1/4″| ****

7″

| 0″| 11 3/8″| ****

11 3/8″

6″| 4 3/4″| 13 1/8″| 6″| 7 1/2″| 13 1/2″| 6″| 16″
12″| 7 5/8″| 18 3/8″| 12″| 11 3/4″| 17 3/4″| 12″| 22″
18″| 10 5/8″| 23 1/2″| 18″| 16″| 22″| 18″| 28″
24″| 13 5/8″| 28 3/4″| 24″| 20 1/4″| 26 1/4″| 24″| 34″
36″| 19 5/8″| 39 1/8″| 36″| 28 3/4″| 34 3/4″| 36″| 46″
48″| 25 1/8″| 48 5/8″| 48″| 36 1/2″| 42 1/2″| 48″| 57″

8″

| 0″| 2 5/8″| 9 5/8″| ****

8″

| 0″| 4 1/2″| 11″| ****

8″

| 0″| 12 3/8″| ****

12 3/8″

6″| 5″| 13 5/8″| 6″| 7 3/4″| 14 1/4″| 6″| 17″
12″| 7 7/8″| 18 7/8″| 12″| 12″| 18 1/2″| 12″| 23″
18″| 10 7/8″| 24″| 18″| 16 1/4″| 22 3/4″| 18″| 29″
24″| 13 7/8″| 29 1/4″| 24″| 20 1/2″| 27″| 24″| 35″
36″| 19 7/8″| 39 5/8″| 36″| 29″| 35 1/2″| 36″| 47″
48″| 25 3/8″| 49 1/8″| 48″| 36 3/4″| 43 1/4″| 48″| 58″
30° Elbow – 2x E30 with 1x Telescopic Length

 | Telescopic Length| X – Offset| Y – Rise
Size| MIN| MAX| MIN| MAX| MIN| MAX
6″| 35 3/4″| 68 1/8″| 20 1/8″| 36 1/4″| 39 5/8″| 67 5/8″
7″| 35 3/4″| 68 1/8″| 20 1/4″| 36 3/8″| 40 1/8″| 68 1/8″
8′| 35 3/4″| 68 1/8″| 20 1/2″| 36 5/8″| 40 5/8″| 68 5/8″
45° Elbow – 2x E45 with 1x Telescopic Length

 | Telescopic Length| X – Offset| Y – Rise
Size| MIN| MAX| MIN| MAX| MIN| MAX
6″| 35 3/4″| 68 1/8″| 29 1/4″| 52 1/8″| 34 3/4″| 57 5/8″
7″| 35 3/4″| 68 1/8″| 29 1/2″| 52 3/8″| 35 1/2″| 58 3/8″
8″| 35 3/4″| 68 1/8″| 29 3/4″| 52 5/8″| 36 1/4″| 59 1/8″
90° Elbow – 2x E90 with 1x Telescopic Length

 | Telescopic Length| X – Offset| Y – Rise
Size| MIN| MAX| MIN| MAX| MIN| MAX
6″| 35 3/4″| 68 1/8″| 46 1/8″| 78 1/2″| 10 3/8″
7″| 35 3/4″| 68 1/8″| 47 1/8″| 79 1/2″| 11 3/8″
8″| 35 3/4″| 68 1/8″| 48 1/8″| 80 1/2″| 12 3/8″

WARRANTY

“SMART CHOICE” LIMITED LIFETIME WARRANTY
Selkirk Corporation, (“Selkirk”, “we”, “us”, “our”) warrants our residential Chimney & Venting products (* defined below) to be free from defects in material and workmanship. For products installed after January 1, 2009, for a period of Ten (10) years from the original installation, we will provide replacement products with a similar or like quality of available Selkirk products, free of charge, excluding any installation costs. From the Eleventh (11) through the Fifteenth (15) years, we will provide replacement products at a cost of 75% off the published Retail Price in effect on the date the claim is received, excluding any installation costs. At the expiration of the Fifteen (15) year term, we will provide a replacement product at a cost of 50% off the published Retail Price in effect on the date the claim is received excluding any installation costs. This warranty coverage is non-transferable and applies exclusively to the original consumer.

PROFESSIONAL INSTALLATION:
If the installation is performed by Professional Installers certified in Canada by WETT or APC or in the USA by NFI or CSIA, we will provide a replacement product with a similar or like quality of available product, free of charge (excluding any installation costs) for the full Fifteen (15) years from the date of original installation. To be eligible for this additional warranty the consumer must provide proof of installation by a Professional Installer when submitting a claim.

LIMITATIONS:
BUYER’S REMEDIES ARE LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT AND DO NOT INCLUDE INSTALLATION COSTS. EXCEPT AS SET FORTH HEREIN, ALL OTHER WARRANTIES (EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. IT IS AGREED THAT THIS SHALL BE THE SOLE AND EXCLUSIVE REMEDY OF THE BUYER. IN NO EVENT SHALL WE BE LIABLE FOR ANY CONSEQUENTIAL, SPECIAL, OR PUNITIVE DAMAGES ARISING DIRECTLY OR INDIRECTLY FROM THE USE OF THE PRODUCTS WHETHER BASED ON WARRANTY, CONTRACT NEGLIGENCE, OR STRICT LIABILITY.

ALL LENGTHS, TEES, ELBOWS, AND COMPONENTS SUPPLIED BY US ARE SUBJECT TO WARRANTY COVERAGE. PRODUCTS SUPPLIED BY THE US AS REPLACEMENT FOR ORIGINAL MATERIAL WILL BE SUBJECT TO A ONE-YEAR WARRANTY COVERAGE WITH THE EXCEPTION OF SAF-T PIPE WHICH IS SUBJECTED TO A 5 YEAR LIMITED WARRANTY COVERAGE FROM DEFECTS IN MATERIAL OR WORKMANSHIP WHEN PROPERLY INSTALLED PURSUANT TO THE MANUFACTURER’S INSTALLATION INSTRUC-TIONS AND APPROPRIATE CODES.

WARNING:
FAILURE TO INSTALL OR OPERATE PRODUCTS ACCORDING TO THE MANUFACTURER’S INSTRUCTIONS OR FAILURE TO USE PRODUCTS WITH RESIDENTIAL APPLIANCES THAT HAVE BEEN CERTIFIED AT AN ACCREDITED LABORATORY WILL VOID ALL APPLICABLE WARRANTIES.

THIS WARRANTY DOES NOT COVER:

• any non-stainless base tee unit mounted or connected to an Insulated Chimney system;
• costs (labor or otherwise **) associated with either removing a previously installed product, installing a replacement product, transportation or return of a product, or transportation of a replacement product;
• damage to the finish of products caused by the use of improper sealants/solvents/chemicals or improper (or lack of) cleaning methods;
• damage resulting from normal wear and tear, corrosion from salt air, or failure to reasonably clean, care for or maintain products in accordance with our installation instructions/recommendations;
• damage (to products, appliances, or structure) based on or resulting from improper installation or repair, misuse or abuse (including, but not limited to, excessive or improper operating condition), or alteration or adjustment other than in conformity with our installation instructions and specifications, whether performed by a contractor, service company, technician, or yourself;
• any products that have been moved from their original installation site;
• damage caused by burning driftwood, garbage, or any other prohibitive material that has been burned in the appliance served by the chimney;
• damage that results from accidents such as riots, fires, floods, high winds, “acts of God”, or any other contingency beyond our control.

Due to the wide variance in installation practices and other conditions beyond our control, except as stated above, we do not guarantee or in any way warrant the installation of Chimney and Venting products.

CLAIM PROCEDURE: If you believe that a product is defective, notify us in writing at:

SELKIRK CANADA
P.O. Box 526, Depot 1 Hamilton, Ontario, CANADA, L8L 7X6
ATTN: WARRANTY CLAIMS 1.888.735.5475
www.selkirkcorp.ca.

SELKIRK CORPORATION
4460 44th Street S.E., Suite F Grand Rapids, MI 49512
ATTN: WARRANTY CLAIMS 1.800.433.6341
www.selkirkcorp.com.

Notification should include a description of the product, model, and serial number (if applicable) and a description of the product defect. Upon receipt of a written claim under this limited warranty and evidence of the date of purchase or installation, at our option and in our sole discretion, we will provide replacement products with a similar or like the quality of the available product excluding any installation costs. We reserve the right to inspect or investigate any warranty claims prior to determining whether to provide a replacement product. If, as determined by us, that repair or replacement of the product is not commercially practicable or cannot be completed in a timely manner, we may refund the prorated purchase price paid for the product upon verification by providing a copy of your invoice or receipt of the bill of sale.

Selkirk products covered under this warranty: AFCL, ALT, BV (SD, MD, LD), CF, DCC, DFS, DSP, DT, DWC, DWS/SWC, E, FC (JSC), EFC, GT, GTL, HT, OV, PL, QC, R, RF, RV, SAF-T LINER, SAF-T PIPE, SC-1 (JM), SFCL, SPR, SPV, ST, SSFL, SSRL, U1, UPP, USP, UT, UTL, VP, WV.

Selk12 Selkirirk bk by Dury Duraavvent | went | www.selk.selkirkcrp.com (US) www.selkirkcorp.ca (CAN).

Customer Service and Support:

• Airmate (USA)……………………………………… 800.992.8368
• Airmate (CAN)………………………………………888.735.5475
• Ameriflow………………………………………………800.252.8467
• Amerivent (Retail)……………………………….800.252.8467
• Amerivent (Hearth & Wholesale)….. 800.423.4270
• Amerivent (Support)…………………………..800.748.0392
• AMPCO (USA)……………………………………….800.669.3269
• AMPCO (CAN)……………………………………….888.735.5475
• Duravent………………………………………………. 800.835.4429
• Hart & Cooley………………………………………. 800.433.6341
• Hart & Cooley (Support)…………………….800.748.0392
• Heatfab (USA)……………………………………….800.772.0739
• Heatfab (CAN)………………………………………800.848.2149
• Lima……………………………………………………….. 800.423.4270
• Milcor………………………………………………………800.774.5240
• Portals Plus……………………………………………800.774.5240
• RPS………………………………………………………….800.624.8642
• Security Chimney (USA)……………………800.361.4909
• Security Chimney (CAN)……………………800.667.3387
• Selkirk (USA) Residential…………………. 800.992.8368
• Selkirk (USA) Commercial……………….. 800.848.2149
• Selkirk (USA) Support…………………………800.748.0392
• Selkirk (CAN)………………………………………..888.735.5475

Manufacturing & Distribution Centers:

CANADA

• Nobel, ON Manufacturing
• Laval, QC Manufacturing
• Prescott, ON Distribution

USA

• Grand Rapids, MI Center of Excellence
• Dallas, TX Distribution
• Englewood, OH Distribution
• Huntsville, AL Manufacturing & Distribution
• Mira Loma, CA Distribution
• Nampa, ID Manufacturing & Distribution
• Turner Falls, MA Manufacturing & Distribution
• Vacaville, CA Manufacturing

MEXICO

• Ojinaga, MX Manufacturing
• Mexicali, MX Manufacturing

Corporate Headquarters:

Duravent Group

• 28 W. Adams, Suite 1810 Detroit, MI 48226
• Tel: 800.835.4429
• Email: info@duraventgroup.com
• www.duraventgroup.com.

800.992.8368 (US) 888.735.5475 (CAN) | Selkirk by Duravent

© 2023 Duravent Group. All rights reserved.
SK_USP_CT-001E_02-21-23.

www.duraventgroup.com

References

• Duravent Group
• Selkirk
• Selkirk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>