FIAMMA 02426-22A Deluxe DJ Ladder Instruction Manual
- June 10, 2024
- FIAMMA
Table of Contents
FIAMMA 02426-22A Deluxe DJ Ladder
Product Information
The COMFORT-Alu ladder is designed to be installed on the roof of a Mercedes Sprinter 06, VW Crafter 06-16, VW Crafter 17, or Ford Transit 14. It is made of lightweight aluminum and comes in a deep black color. The ladder has a length of 116 cm or 165 cm and a width of 28 cm or 34 cm, depending on the model. The package includes installation instructions and all necessary hardware for installation.
Product Usage Instructions
Before installing the ladder, make sure that nothing has been damaged or deformed during transport. If you have any doubts or questions about the installation, use, or limitations of the product, contact your dealer or qualified personnel. The installation must be carried out in compliance with current local regulations.
To install the ladder, follow the dedicated instructions for installing the fixing bars. Make sure to use the hardware included in the package and do not modify the product in any way. If you encounter any problems during installation, contact your local dealer or consult the spare parts drawing on our website.
After installation, make sure to respect the instructions and advice for usage provided in the user manual. Do not modify the ladder or use it for any purposes other than its intended use. Fiamma declines all responsibility for any personal injury or damage to property due to incorrect assembly or use of the product.
Finally, it is recommended to keep the instructions inside the vehicle so that they are easily accessible if needed.
Package contents
DIMENSION
Deluxe DJ 02426-22-
Deluxe DJ Deep Black 02426-22A
5,5 kg
Installation Instructions
-
Check that nothing has been damaged or deformed during transport.
In the event of doubts or questions concerning the installation, use or limitations of the product, contact the dealer. We recommend that the installation is carried out by qualifi ed personnel and in compliance with current local regulations.
-
For installation of the fi xing bars, please refer to the dedicated instructions
-
ONLY FOR
Kit Bars DJ Transit ≥ 14
Item No. 08772-02-
Item No. Deep Black 08772-02A
WARNING
In case of problems please contact your local dealer. Consult our website for spare parts drawing.
Fiamma declines all responsibility for any personal injury and damage to
property due to incorrect assembly or use of the product; it is suggested to
keep the instructions inside the vehicle. The assembly of the product must be
carried out according to the assembly instructions: the product must not be
modified in any way.
In the event of an accident involving the vehicle and/or the product, ensure
that the product has not been damaged. In the event of damage, contact your
local retailer before moving the vehicle. Fiamma declines every responsibility
for any modification of the product that may cause damage and/or injury to
things and people.
Read the following instructions and warnings carefully; failure to observe
these installation and usage instructions as well as the Highway Code in the
relevant country may cause severe harm or damage for which the manufacturer
declines all responsibility. Keep the original packaging to be used in case of
return.
Before installation, ensure compatibility with the vehicle on which the
product must be installed.
Checking that the wall/rear door is sufficiently solid and suitable for
guaranteeing the resistance of the anchoring points is always mandatory. If
not, fixing and compliance with the maximum load indicated in the instructions
are not guaranteed and it will be necessary to reinforce it.
Always comply with speed limits and the Highway Code. The speed should always
be suitable to traffic conditions and transported load. Check periodically the
ladder to make sure it is firmly attached, especially during the first
kilometers of after long trips.
Warranty
Warranty Fiamma
In case of defects with regards to materials and manufacturing, the customer
is entitled to the warranty in accordance with local laws and regulations of
the country in which the product was purchased.
Fiamma S.p.A. – Italy
Via San Rocco, 56
21010 Cardano al Campo (VA)
All rights reserved.
Fiamma S.p.A.
reserves the right to modify at any time, without notice, prices, materials,
specifications and models or to cease production of any model.