audio-technica ATN3600L Turntable Record Player Half Inch Moving Magnet Cartridge User Manual
- June 10, 2024
- Audio-Technica
Table of Contents
audio-technica ATN3600L Turntable Record Player Half Inch Moving Magnet
Cartridge
Product Information
The ATN3600L is a replacement stylus for turntables. It is compatible with several different turntable models and provides high-quality sound output.
Compatibility
- Audio-Technica AT-LP60
- Audio-Technica AT-LP60USB
- Audio-Technica AT-LP60-BT
- Audio-Technica AT-LP2D-USB
- Audio-Technica AT-LP120-USB
Specifications
- Diamond stylus
- Recommended tracking force: 2.5 grams
- Frequency response: 20-20,000 Hz
- Channel separation: 18 dB at 1 kHz
Product Usage Instructions
- Turn off the turntable and unplug it from the power source.
- Remove the old stylus by gently pulling it out of the tonearm.
- Align the new stylus with the cartridge and gently push it into place until it clicks into position.
- Adjust the tracking force to 2.5 grams according to the turntable’s user manual.
- Plug in the turntable and turn it on.
- You are now ready to enjoy high-quality sound from your turntable with the new ATN3600L replacement stylus.
Thank you for purchasing this Audio-Technica product. Before using the product, read through this user manual to ensure that you will use the product correctly. Please keep this manual for future reference. Use the product with the proper tracking force indicated in the specifications.
Replacing the stylus
- Remove the replacement stylus by pulling in the direction of the arrow without touching the cantilever, stylus tip, and magnets. A
- Install a new replacement stylus onto the cartridge body. B )
- Lifetime of the replacement stylus is approx.
300 to 500 hours.
Product Specifications
- Tracking force: 3.0 to 4.0 g (3.5 g standard)
- Stylus: Conical bonded
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666,
Japan
©2017 Audio-Technica Corporation
References
Read User Manual Online (PDF format)
Loading......