xiaomi M7 Wireless Door Bell Instructions
- June 4, 2024
- Xiaomi
Table of Contents
Instructions
M7 Doorbell Manual
Overview
Doorbell:
Instruction:
-
Scan the QR code below to download
https://play.google.com/store/apps/details?id=com.naxclow.xiaofang
https://apps.apple.com/cn/app/%E5%B0%8F%E9%98%B2%E6%99%BA%E8%83%BD%E9%97%A8%E9%93%83/id1563334151 -
Register and log in to the APP
-
Click the “+” button in the APP to add a device.
Please follow the instructions in the APP.
Notice:
Please open Bluetooth and wireless LAN.
Please allow the APP to get authorities from your phone.
Do not support 5G WiFi.
Do not support WiFi with names containing Chinese characters.
Please do not install the doorbell on metal.
Please use the doorbell and the chime within a strong WiFi range.
Please test the doorbell and the chime before you install them.
Please tear off the lens-protection film after installation.
Pairing doorbell with chime
- Insert the USB p l u g into an appropriate power supply (5V 1A).
- Press and hold on to the pairing button of the chime for 2 seconds until the indicator light solid on.
- Press the doorbell button of the doorbell, and wait for pairing until the indicator light of the chime goes out.
Notice:
- Please put the doorbell close to the chime during the pairing process.
- Please ensure the doorbell is not out of power during the pairing process.
- The indicator light of the chime goes out when pairing success.
- If you don’t do pairing step 3 after done pairing step 2, the chime’s indicator light will go out as well after 10 seconds and the pairing will fail.
- Please reset the doorbell and try again if the pairing failed.
Reset & Restore to factory settings
Reset:
Press and hold on to the doorbell button until you hear the voice prompt.
Restore to factory settings:
Remove the backboard that is fixed with screws. Then use the screwdriver to
press the little black reset button in the reset hole at the back of the d o o
b e l l. Gently tapping on the button will do the work. 
Functions:
Real-time video call:
When a visitor presses your doorbell, your phone will receive a notification
from the APP. You have to bind the doorbell with your account in the APP on
your phone.
Sharing doorbell:
Share video calls and doorbell answering with your families or friends in the
APP. To get sharing, your families or friends need their own account in the
APP.
Charging:
When the doorbell battery is low, the phone which binds with the doorbell will
receive a low battery notification from the APP. To charge the doorbell,
please remove the doorbell from the installed backboard with the screwdriver.
Then charge the doorbell with the USB cable (5V 1A). The charging light of the
doorbell will be solid on when charging, the light will go out when fully
charged.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>