HEX POWER HEX-662 BulbCam Smart Home Security Camera User Guide

June 10, 2024
HEX POWER

HEX POWER HEX-662 BulbCam Smart Home Security Camera

HEX POWER-HEX-662-BulbCam-Smart-Home-Security-Camera

SIGN UP& LOGIN

HEX POWER-HEX-662-BulbCam-Smart-Home-Security-Camera-3

ADD CAMERA (S)

Choose either SCAN CODE or Wi-Fi Connection
QR Barcode is located on the back of the camera

  • Support Multi-cameras View
  • Installl camera one at a time

CONNECT WI-FI

SUPPORT W-FI 2.4GHZ (5GHZ IF EQUIPPED)

  • For security propose, this device support private network connection only.
  • DO NOT support public network with additional sign-in options
  • Turn on location of phone

PAIRING NETWORK

  • PLACE THE QR CODE IN FRONT OF THE WI-FI CAMERA
  • WAIT FOR 1-2 MINS TO CONNECT NETWORK
    • Check if the internet connected
    • Check network stability
    • Check the distance of the camera
    • Check all devices is powered ON

HOW TO USE

  • HD/SD: High /Standard Definition
  • Data Connection Speed Status
  • Video Record
  • Mute/Unmute
  • Two-Way Audio
  • Crop: Screen Capture
  • Landscape Mode
  • PTZ: Pan Tilt Zoom 355°

HEX POWER-HEX-662-BulbCam-Smart-Home-Security-
Camera-11

SETTING

  • Camera Name (Rename)
  • Camera On/off
  • Camera Setting (Flip, Rotation, Time Zone, Motion Tracking, Firmware)
  • Echo show (if equipped)
  • Could storage Purchase (optional)
  • Smart Detection Setting
  • Notification Setting
  • PIN Protection
  • Network Setting
  • Delete Camera

CONNECT ALEXA/GOOGLE ASSISTANT

HEX POWER-HEX-662-BulbCam-Smart-Home-Security-Camera-5

FAQ

Q: Fail to connect the camera?
A: Reset the Camera by using the PIN tool insert for 15 seconds while powering on the camera

Q: Fail to add device during Network Paring?

  1. Please make sure the mobile phone and device are connected to a 2.4GHz router, if 5 GHz please make sure the device is supported 5GHz
  2. Make sure the correct Wi-Fi password is entered.

Q: How does the camera store video

  1. TF/Micro-SD card Maximum 128GB (FAT 32 Format)
  2. Cloud storage by APP purchase
  3. When memory is full, it will be default as loop recording

Q: Wi-Fi Signal too weak

  1. Purchase Wi-Fi extender
  2. Remove any types of interference object from the location

DOWNLOAD THE YI IOT APP
Scan the QR Code Below

  • Reset button is located at the bottom of the device.
  • It may be covered by a waterproof rubber.
  • Use a sharp tool to reset and wait for the voice prompt

Video Guide
www.Natosporty.com/download

www.natosporty.com/hexpower

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals