EPH CONTROLS TA2 Thermal Actuator Instruction Manual
- June 10, 2024
- EPH CONTROLS
Table of Contents
EPH CONTROLS TA2 Thermal Actuator
TA2 Thermal Actuator
The TA2 Thermal Actuator is an electrically operated valve used to control the flow of fluids or gases in pipelines. It is designed for use in normal environments and can be used in various applications such as heating, ventilation, and air conditioning systems.
Product Information
- Factory setting is (NC) Normally Closed
- Guidelines for the electrician; Level of contamination 2; As per EN60730
- IP 44 and IP 42 rated for protection against dust and water
- Available in two variants: TA230 (230Vac) and TA24 (24Vac)
- Voltage: 230 V~ or 24V ~ depending on the variant
- Running time: 3.5 minutes
- Stroke: 3.5 mm
- Spring pressure: 125 N
- Power consumption: 2.5 W
- Inrush current: Depending on the voltage used
Product Usage Instructions
Before using the TA2 Thermal Actuator, ensure that the cable is not defective.
If the cable is defective, do not use the actuator. Disconnect the power
supply from any defective appliances.
The factory setting of the TA2 Thermal Actuator is Normally Closed (NC). When
changing from Normally Closed to Normally Open, live components are exposed.
Therefore, disconnect the power before changing the settings.
The TA2 Thermal Actuator is designed for use in normal environments and is
rated IP 44 or IP 42 for protection against dust and water. The actuator is
available in two variants: TA230 (230Vac) and TA24 (24Vac). Ensure that you
select the correct variant for your application.
Refer to the product manual for guidelines on the level of contamination and
installation instructions as per EN60730.
CAUTION! Do not use if cable is defective.
- Disconnect the power supply from any defective appliances.
- Factory setting is (NC) Normally Closed
- Guidelines for the electrician; Level of contamination 2; As per EN60730
- When changing from normally closed to normally open, live components are exposed. Therefore, disconnect the power when changing.
Installation Instructions
EPH Controls Ireland
technical@ephcontrols.com
www.ephcontrols.com
EPH Controls UK
technical@ephcontrols.co.uk
www.ephcontrols.co.uk
2023-03-23_TA2_Insins_PK
For use in normal environments.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>