T-mark TW4 LTE GNSS Tracker User Manual

June 10, 2024
T-MARK

T-mark TW4 LTE GNSS Tracker

T-mark-TW4-LTE-GNSS-Tracker-fig-1

Please carefully read the user manual before using the product to ensure proper installation and quick activation. If there are any changes to the appearance or color of the product, the actual product will take precedence over the manual.

Introduction

The TW4 LTE GNSS Tracker is a no-wire installation device that provides driving behavior analysis, multi-GNSS, location data re-upload, smart power saving, multiple working modes, and anomaly alert (vibration, over-speed, power-off, etc.).

Features

  • No-wire installation
  • Driving behavior analysis
  • Multi-GNSS
  • Location data re-upload
  • Smart power saving
  • Multiple working modes
  • Anomaly alert (vibration, over-speed, power-off, etc.)

Operating Environment

  • Operating voltage: 3.5-4.3 VDC
  • Operating current: 60mA
  • Standby current: 8mA
  • Operating temperature: -20 to 70°C
  • Storage temperature: -40 to +85°C
  • Positioning accuracy: (not specified in the manual)

Product Usage Instructions

  1. Unbox the product and ensure that all the components are present.
  2. Determine the installation location for the tracker.
  3. Ensure that the operating voltage is within the specified range (3.5-4.3 VDC).
  4. Install the tracker in the chosen location.
  5. Power on the tracker and activate it online using the instructions provided in the manual.
  6. Once activated, configure the tracker settings to fit your requirements.
  7. Monitor the tracker data using the provided software or application.
  8. If an anomaly alert is triggered, take appropriate action according to the instructions provided in the manual.

Please read the manuals carefully before you use it, so as to get the correct installation and quick online activation. If the appearance and color of the product are changed, the object will prevail.

Introduction

Features

  1. No-wire installation
  2. Driving behavior analysis
  3. Multi-GNSS
  4. Location data re-upload
  5. Smart power saving
  6. Multiple working modes
  7. Anomaly alert (vibration, over-speed, power-off, etc.)

Operating Environment

  • Operating voltage: 3.5-4.3 VDC
  • Operating current: 60mA
  • Standby current: 8mA
  • Operating temperature: -20℃ to 70℃
  • Storage temperature: -40℃ to +85℃
  • Positioning accuracy: <10m
  • Location modes: GPS, BDS, AGPS, and LBST-mark-TW4-LTE-GNSS-Tracker-fig-5

Frequency Bands

  • Communication network: LTE Cat1 + GSM
  • LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28/B66
  • GSM: B2/B3/B5/B8

Overview

Appearance

T-mark-TW4-LTE-GNSS-Tracker-fig-2

Connotations of Indicators
  • Power Indicator (Red)
    • Keep on: Connected to external power
    • Off: Not connected to external power
  • GNSS indicator (Blue)
    • Fast flashing: The device is searching for satellite signals.
    • Keep on: The GNSS module is already fixed a position.
    • Off: Device is in sleep mode or not operating
  • Network indicator (Green)
    • Fast flashing: The network in searching
    • Slow flashing: The network signal is normal
    • Keep on: The device online
    • Off: Device is in sleep mode or not operating
      Note: By default, when the device is stationary for 3 minutes, the LED will automatically turn off and wake up after a vibration.

Installation

Inserting the SIM Card
  • Step 1 Prepare a proper SIM card;****T-mark-TW4-LTE-GNSS-Tracker-fig-3
  • Step 2 Insert the SIM.

After the SIM card is inserted, the device powers on using the backup battery. If the device fails to power on due to low battery, you can connect the device to the external power.
Note: The SIM card must be inserted correctly, has GPRS services activated, and is not in arrears. If the SIM is identified and requires a PIN, please disable the PIN request.

Installing the Device
Put under the car seat or other hidden places, place the environment do not have signal interference.

Product Features

Content Function Description

Positioning function

|

Timed tracking

| Transmit back the positioning information

such as latitude and longitude according to the set interval time.

Street map| 360 degree high-definition map
Speeding

alarm

| When driving over speed, the locator will

send alarm to your cell phone

Vibration alarm| Built-in vibration sensor, continuous vibration of the vehicle, the device will

immediately send alarm alerts

Electronic fence| When the car driving range exceeds the

specified area, the platform will send alarm information

History track

| Can play back 90 days of the track, playback the speed, direction, stay time and other

content

Displacement alarm

| When the vehicle encounters illegal

operation or theft, the fuel and electricity can be cut off remotely by computer or cell phone APP

Fleet

management

| 1 cell phone can manage multiple devices, or

1 device multiple cell phone management

Analysis of common problems

Failure

phenomenon

| Failure analysis| Treatment method
---|---|---

GPS is not positioned

| Determine whether to use the terminal in areas with poor GPS signals, such as near tall buildings or

underground parking lots

|

Move the vehicle to a location with a good signal Use the terminal

Determine whether the front windshield of the vehicle has metal heat insulation film

affecting the signal reception

| If there is a film, the equipment will be

changed to other vehicles to test whether the blue light is always on, such as in other vehicles without film to test no problem, then the vehicle is caused by the film

Determine whether there is a shield or signal jammer on or

around the car

| If there is a shield or source of

interference, remove the shield or source of interference and try to reinstall

GSM is not working

| Determine whether the SIM

card is installed properly

| Check whether the SIM card is installed

in place

Determine if there is dirt or

poor contact on the metal surface of the SIM card

| Wipe the metal chip surface with a clean

cloth or repeatedly insert and remove the card several times

Determine if the vehicle is in a place with no mobile network, such as an

underground parking lot.

| Please drive the vehicle to a place with good network signal and try to reinstall it.
Determine whether the

server background is normal

| Ask if the server of the background

management platform is normal

Determine whether the SIM card status is normal or not| Check whether the status of the SIM card is normal through the SIM card

inquiry platform

Determine whether there is a shield or signal interferer on

the car or around

| If there is a shield or source of

interference, remove the shield or source of interference and try to reinstall

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals