iHome iLW300 Foldable LED Lamp with Wireless Charging USB Charging and Alarm Clock User Guide

iHome iLW300 Foldable LED Lamp with Wireless Charging USB Charging and Alarm Clock

TOP PANEL

WIRELESS CHARGING

Place device face up on the charging rest. LED Status Indicators will show charging status:

Rapid blinking LED: Device is not charging (reposition device)
Slow blinking LED: Device is charging
Solid LED: Device is fully charged

WARNING: Remove phone’s metal protective case before charging. Do not place magnetic or metal objects on charger during charging. Qi compatible phones with metallic looking finishes will charge normally

POWER ON/OFF

• Press to turn the lamp On and Off

LIGHT TEMPERATURE M

– Press repeatedly to change the light temperature in following order

• Warm light
• Cool light
• Natural light

BRIGHTNESS

– Press to increase/decrease the brightness

BACKUP BATTERY COMPARTMENT

(for clock accuracy and alarm setting backup)

To replace the battery:

1. Make sure the AC adapter is connected, or you will lose your clock settings during battery replacement.
2. Use a Phillips screwdriver to unscrew the battery compartment door.
3. Remove the exhausted battery and insert a new CR2032 battery. Replace the compartment door. Do not overtighten the screw. Keep exhausted battery away from children and dispose of properly.

TIME SET

• In Time Mode, press the button on the back to start setting the time
• Use to set the hour and press button to confirm
• Use to set the minute and press button to confirm
• Continue steps to set year, month, and date, and press button to confirm clock settings

Note: Use Button to set 12/24 hour display.

ALARM SET

• Press the button on the back enter the alarm set and then press the to start setting the alarm time
• Use to set hour and press button to confirm
• Use  to set the minute and press button to confirm
• Continue steps to set the Snooze Duration (1-60 minutes) and alarm sound (1-8) and press button to confirm alarm settings
• Press or to arm the alarm, press again to arm the snooze
• Press or again to disarm the alarm and snooze
• Press button to back to the time display
• The alarm will sound for one minute. Press or any other button to stop the alarm
• If snooze mode is armed, please or to snooze the alarm

TEMPERATURE

In Time Mode, Use to change the temperature display between Celsius and Fahrenheit

DISPLAY DIMMER

Press button on the back to adjust Display Brightness: cycle through Hi, Lo and OFF

MAINTENANCE

• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture.

WARNING:

• Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
• Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• CAUTION – RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

IMPORTANT SAFETY INSTRUCTIONS

Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference.

1. Allow Lamp to cool before handling. Light source can become hot during operation.

2. Do not stare at the light source directly while it is in use, risk of visual impairment.

3. This product is intended for use indoors only, in dry, enclosed rooms. Never in a wet environment or with wet hands in the vicinity of a bathtub, shower or swimming pool-Danger of Electric Shock!
   2. Unplug unit and clean only with dry cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit.
   3. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

4. Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.

5. Only use attachments/accessories specified by the manufacturer.

6. Unplug this product during lightning storms or when unused for long periods of time.

7. Damage Requiring Service – This product should be serviced by qualified service personnel when:
   – Plug has been damaged.
   – Objects have fallen into or liquid has been spilled into the enclosure.
   – The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
   – The unit exhibits a marked change in performance or does not operate normally.

8. No naked flame sources, such as lighted candles, should be placed on this product.

9. This product is suitable for use in tropical and/or moderate climates.

WARNING:

• To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
• Do not dispose of batteries in the household trash or fire.
• The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable

FCC Information

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with minimum distance 20cm (8 inches) between the radiator & your body.

© 2023 SDI Technologies, Inc. All rights reserved

iLW300 – Instruction Sheet – English
Color: Black text on white paper (1C + 1C)
Size: 102 x 150 mm
Material: 85 gsm wood free paper

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>