BOOMPODS 2A36Q Sound Waves Wireless Earbuds User Manual
- June 10, 2024
- Boompods
Table of Contents
BOOMPODS 2A36Q Sound Waves Wireless Earbuds
Product Information
- FCC ID : 2A36Q-SOUNDWAVE
- Compliance: Part 15 of the FCC Rules
- Interference: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
- Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- RF Exposure : The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Product Usage Instructions
- Make sure the device is fully charged before using it.
- Turn on the device by pressing and holding the power button for a few seconds.
- Pair the device with your smartphone or other compatible device using Bluetooth.
- Adjust the volume and other settings as desired.
- Use the device for listening to music or taking calls, as applicable.
- If there are any issues with interference or undesired operation, try moving the device further away from other electronic devices or sources of interference.
- To turn off the device, press and hold the power button again until the indicator light turns off.
But how is this possible?
I mean, this was a plastic waste! Yes. But when it comes to the most commonly used materials we’re collecting, for instance, PET bottles, this waste already had food grade during its first lifecycle. After collecting it, our local teams are washing and sort the plastic which is then shredded into flakes. After this step, the innovative technology we have developed with the Swiss University of Applied Sciences OST takes over: We transform these flakes into pellets in a purely mechanical process, and neither chemicals nor virgin plastics are added. we Use the latest technology and apply physical methods (vacuum, decompression, degassing, melting) to transform waste and extend the molecular chains of these wasted polymers. The result is a strong, clean, and reliable material.
In the Box
The recycled ocean plastic Used fo make this product may have traces of the wide mix of types of plastics Collected, fhis can allow some minor black spofs and imperfections to appear upon the surface. These are normal and do not affect the performance of the product. The material is unique in character and happy not to be in the Sea.
How to Connect
Note : once you have followed this procedure, the next time you remove
from the charging case earbuds will connect to your phone automatically
.
Touch Controls
Your earbuds come pre-set as below but\ you can CUstomise to how your want
through the boom pods APP
If not connected earbuds will power down after 5 mins
Charging
Charging buds
Charging case
RESET
In the unlikely case of any pairing problem
Place earbuds into charging case and go to the Boompods App and select Reset.
Further enhance your experience by downloading fhe Boompods APp. go fo fhe App
store.
- Battery 50mAh Built-in Lithium Battery
- Case battery 500mAh Lithium Battery
- Charge Time 1.5 hrs
- Frequency: 20– 20 KHZ
- Microphone Type MEMS Omni-directional
- SensifiviTy -42+3dB @TkHz100Hz10KHz
- Mic frequency range -Oc 45c
- Operafing temperature -Oc 45c
- Bluetooth V5.3
- IPX Rating IPX 6
- Play Time 5.5 hrs (1 charge) total 30hrs
The Declaration of Conformity can be found at:
htfps://www.boompods.com/product/soundwave
Hereby, Boompods declares fhat the radio equipment fype Earphone with
Bluetooth] is in compliance with Directive 2014/53/EU. FCC ID:2A36Q-SOUNDWAVE
iPod, iPhone, and iPad are trademarks of Apple Inc registered in the US and
other countries
Android is a registered trademark of Google Inc., registered in the US and
other countries
BOOMPODS is a trademark of BOOMPODS LTD. BOOMPODS ©2023 AII Rights.
BOOMPODS Ltd (UK), Norwich NR11 7AQ, UK. BOOMPODS (EU), Granica, 05-806, PL.
info@bOompods.com
Registered No: 08147066. Made in China.
www.boompods.com
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
This device may not cause harmful interference, and This device must accept
any interference received, including interference that may cause undesired
operation.
Waning : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>