HYUNDAI HYPM1600E Electric Paddle Mixer Instruction Manual
- June 10, 2024
- HYUNDAI
Table of Contents
POWER PRODUCTS
PADDLE MIXER
HYPM1600E
Instruction Manual
WARNING: Read the instructions carefully before use.
Introduction
Thank You For Purchasing Your HYUNDAI Product
We work very hard to give all of our customers the best possible service. If
you have any problems, before leaving negative feedback, please contact us to
give us a chance to resolve the issue. We would be delighted if you left us
positive feedback! Thank you for purchasing this product.
Important!
WARNING: READ THE INSTRUCTION BOOKLET THOROUGHLY BEFORE USING THE
MACHINE. Keep for future reference and pass it on if the machine is
loaned or sold to another user.
This manual has been produced by Hyundai Power Products and should be kept
with the product. Please read and understand these instructions before you use
your product. Failure to do this may result in personal injury or damage to
the product.
The safety precautions and warnings are to ensure your safety and protect you
from harm or damage to the product.
The information contained in this manual was accurate at the time of
production, however HYUNDAI Power Products may make modifications to the
product without notification.
Safety Information
Understand Your Machine
- WARNING! You must read these instructions carefully before operating the machine. Make sure that you are familiar with the controls and properly operate the machine. You must learn how to stop the machine quickly. If you do not follow the warnings and instructions, it may result in fire and/or serious injury. Make sure to save all warnings and instructions for future reference.
- Read this manual and labels affixed to the machine to understand its limitations and potential hazards.
- Be thoroughly familiar with the controls and their proper operation. Know how to stop the machine and disengage the controls quickly.
- If the unit is to be used by someone other than original purchaser, or is to be loaned, rented, or sold, always provide this manual and any needed safety training before operation. The user can prevent and is responsible for accidents or injuries that may occur to themselves, to other people, or to property.
- Do not force the machine beyond its limits. Use the correct machine for your application.
- Know how to stop the machine quickly in case of emergency. Understand the use of all controls.
- ALL MAINTENANCE other than that listed in this manual, should be carried out by professionally trained and certified personnel.
- When using this machine for the first time and before actual work, you MUST learn how to handle the machine from an experienced or skilled person.
Personal Safety
- WARNING! Never allow children or people unfamiliar with these instructions to use the product. Local regulations can restrict the minimum age of the operator.
- Keep children, pets, and other people not using the unit away from the work area (at least 15m). Be alert and shut off the unit if anyone enters work area. Keep children under the watchful care of a responsible adult.
- Stay alert, watch what you are doing and use common sense when operating the machine. Never operate the machine when unwell or tired, or if you have taken alcohol, medicine, drugs or any substances which may slow your reflexes and compromise judgment. A moment of inattention while operating the machine may result in serious personal injury.
- Appropriate Personal Protective Equipment (PPE), MUST be worn at all times when operating or repairing the machine. Always wear anti-slip and resistant work footwear and long trousers while using the machine. Do not use the machine when barefoot, wearing sandals or similar lightweight footwear. Do not wear chains, bracelets or clothing that is loose fitting or hanging ties or cords. Tie long hair back. Always wear protective earplugs. Loose clothes, jewellery, or long hair can be caught in moving parts. Protect eyes, face, and head from objects that may be thrown from the unit. Always wear safety goggles or safety glasses with side shields when operating.
- Always keep hands and feet away from all moving parts during operation. Moving parts can cut or crush body parts. Always keep hands and feet away from all pinch points.
Personal Safety (Continued)
- Do not touch parts that might be hot from operation. Allow parts to cool before attempting to maintain, adjust, or service.
- Do not overreach. Keep proper footing and balance at all times. This enables better control of the machine in unexpected situations. Extending your body too far can result in a loss of balance and you may fall which will result in injury.
- Never place any part of your body where it would be in danger if movement should occur during assembly, installation, and operation, maintenance, repairing or moving.
- Keep in mind that the operator or user is responsible for accidents, hazards or unexpected events involving the machine that occur to other people or their property. It is the responsibility of the user to assess the potential risk of the area where work is being carried out. The operator or user must take all necessary precautions to ensure their own safety and that of others, especially on slopes or rough, slippery and unstable ground.
Inspect Your Machine
- Check your machine before starting it. Keep guards in place and in working order. Make sure all nuts, bolts, etc., are securely tightened.
- You must check the general condition of the machine before use.
- Never operate the machine when it is in need of repair or is in poor mechanical condition. Replace damaged, missing, or failed parts before using it. Check for fuel leaks. Keep the machine in safe working condition.
- Do not use the machine if the machine’s switch does not turn off the machine when running. Any machine that can’t be controlled with the switch is dangerous and must be replaced.
- Regularly check to see that keys and adjusting wrenches are removed from the machine area before starting it. A wrench or a key that is left attached to a rotating part of the machine may result in personal injury.
- If the machine should start to vibrate abnormally, stop the machine and check immediately for the cause. Vibration is generally a warning sign of trouble.
- Avoid accidental starting. Be sure the switch is off before transporting the machine or performing any maintenance or service on the unit. Transporting or performing maintenance or service on a machine with its switch on invites accidents.
- Do not tamper with or disable safety systems.
- Only use manufacturer-recommended attachments.
- Before using, always visually inspect to see that the tools are not worn out or damaged. Replace worn out or damaged elements and bolts in set to preserve balance.
- Keep the machine in good operating condition. Operating the machine in poor or questionable condition could result in serious injury.
- Be sure all safety devices are in working order and warning labels are in place. These items are installed for your safety.
Work Area
- You MUST only work in daylight or with good artificial light in good visibility conditions. Do not work at night, at times of heavy fog, or at any other times when your field of vision might be limited and it would be difficult to gain a clear view of the area.
- Keep people, children and animals away from the working area.
- Operate on flat, level ground.
- DO NOT work on wet ground. If there has been heavy rain on the working site, wait until the ground has dried up.
- Never park the machine in a place with unstable ground which could give way.
- You must be careful near ravines, ditches or embankments.
- Exercise extreme caution when operating on or crossing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic.
- Do not work in the rain, when there is a thunderstorm or lightning risk, at times of strong or gale force winds, or at any other times when the weather conditions might make it unsafe to use this product. If there is bad weather conditions, do not use the machine.
- Any liquid spilled on the floor may result in you slipping.
- DO NOT operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools may create sparks, which may ignite the dust or fumes.
During Use!
-
Do not operate the machine in confined areas where there may be a risk of crushing the operator between the machine and another object.
-
Never attempt to make any adjustments, while the machine is running.
-
You must switch off the machine:
– Before checking or working on the machine.
– When transporting the machine.
– Whenever you leave the machine unattended.
– If the machine starts to vibrate abnormally. -
WARNING! If something breaks or an accident happens whilst working, you must turn off the machine immediately and move the machine away to prevent further damage. If an accident happens with injuries or third parties are injured, carry out the first aid measures most suitable for the situation immediately and contact the
medical authorities for any necessary health care. Carefully remove any debris that might cause damage or harm persons or animals should it not be seen. -
Never operate the machine without the defective guards or shields, or without safety devices, or if the cord is damaged or worn.
-
Always make sure that the power cord is not in the way of your work.
Batteries (Where Present) !
Batteries present a risk if they become damaged by the possible leaking of
electrolyte. This electrolyte is an acid and can cause serious burn injuries.
Care should be taken when working on or near them. NOTE: the electrolyte may
be in a liquid or gel form.
Should you come in to contact with electrolyte you should;
-
Remove all clothing contaminated with electrolyte. If you cannot remove then saturate them in water.
-
Get medical assistance as soon as possible.
You must advise the medical staff of the type of acid. -
Lead/acid battery = dilute sulphuric acid.
-
Nickel/cadmium = potassium hydroxide alkali electrolyte.
-
Use fresh running water to wash off excess electrolyte, continue this until medical assistance arrives. Make sure that you do not wash the electrolyte to another part of your body or face.
-
If electrolyte comes in to contact with Eyes the electrolyte needs to be immediately washed away with large amounts of water. Make sure that you do not wash the electrolyte to another part of your face or body.
-
Gasses from charging batteries are highly flammable and great care should be taken to charge in well ventilated areas.
-
There is an explosion risk if the battery terminals are short circuited, when connecting/disconnecting ALWAYS exercise great care so that the terminals or battery leads are NOT allowed to touch and cause a spark. ALWAYS use suitable insulated tools.
Electricity (Where Applicable)
DANGER : ELECTRICITY CAN KILL – NEVER WORK ON LIVE / ENERGISED EQUIPMENT.
- Prior to carrying out any maintenance work you MUST identify electrical . isolation methods and isolate all electrical supplies.
- Prior to use and with all electrical supplies isolated, you MUST check all electrical cables, plugs and connectors for the following;
– Are intact and have no signs of damage, to include but not limited to bare wires, chaffing, cuts and loose wiring.
– If there are any signs of damage, the damaged item MUST be taken out of service until the damage has been repaired by an electrically competent person.
– All trailing cables should be routed so as not to cause any kind of trip hazard.
– NEVER work on or near electricity with wet hands, wet clothing and wet gloves.
Electricity (Continued)
-
Power tools plug must match the outlet. Never modify the plug in any way. DO NOT use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
-
DO NOT expose this power tool to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. DO NOT abuse the power cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep the cord away from heat, oil and sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. When operating a power tool, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
-
IMPORTANT: Make sure that the electric circuit is fused, and that the power, voltage and frequency of the motor is supported by your mains supply. Also, make
sure that your power supply is earthed. Connect your machine to earth. Never open the ON/OFF switchbox. However, if it should become necessary to do so, contact a qualified electrician. Make sure that you will never touch live contacts, specifically when you plug or unplug your machine. This machine and its power cord must never get into contact with water. -
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
-
To prevent electric shock, use only with an extension cord suitable for outdoor use. For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30mA is advisable.
-
Before use, check that the extension cord is in good condition. When using an extension cord, make sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
-
Do not allow any part of the machine to make contact with water while it is in operation. If the appliance becomes wet while turned off, wipe dry before starting. Do not touch the appliance or its plug with wet hands or while standing in water. Wearing rubber boots offers some protection.
-
Before use, check the supply and extension cord for signs of damage or aging. If the cord becomes damaged during use, disconnect the cord from the supply immediately. If the supply cord is damaged, it must be replaced by the manufacturer or a qualified person in order to avoid a hazard.
Double-Insulated Appliances
In a double-insulated appliance, two systems of insulation are provided
instead of grounding. No grounding means that it is already provided on a
double-insulated appliance. Servicing a double-insulated appliance requires
extreme care and knowledge of the system, and should be performed only by
qualified service personnel. Replacement parts for a double-insulated
appliance must be identical to the parts they replace.
Vibrations (Where Applicable)
- Prolonged use of hand held (operated) machines will cause the user to feel the effects of/from vibrations. These vibrations can lead to white finger (Raynaud’s phenomenon) or carpal tunnel syndrome. This condition reduces the ability of the hand to feel and regulate temperature, causing numbness and heat sensations and may cause nerve damage and circulatory tissue death.
- Not all factors that lead to white finger disease are known, but cold weather, smoking and other diseases that affect blood vessels and blood circulation as well as large and long-lasting impact of shocks are considered factors in the formation of white finger. Note the following to reduce the risk of white finger and carpal tunnel syndrome;
- Wear gloves and keep your hands warm.
- Take regular breaks.
- All of the above precautions may help reduce the risk of white finger disease but not rule out the carpal tunnel syndrome. Long-term and regular users are therefore recommended to observe the condition of your hands and fingers. Seek medical attention immediately if any of the above symptoms should occur.
Noise (Where Applicable)
-
The perating noise of the machine can damage your hearing. When wearing protection such as earplugs or ear defenders to protect your hearing. Long-term and regular users are advised to have hearing checked regularly. Be especially vigilant and cautious when wearing ear protection because your ability to hear alarm warnings will be
reduced. -
Noise emissions for this equipment is unavoidable. Carry out noisy work at approved times and for certain periods. Limit the working time to a minimum. For your personal protection and protection of people working nearby it is also advisable for them to wear hearing protection.
-
See Certificate of Conformity section for Outdoor Noise declaration of
-
The conformity.
Residual Risks !
Even when tool is used as prescribed it is not possible to eliminate all
residual risk factors. The following hazards may arise in connection with the
tool’s construction and design:
- Damage to lungs if an effective dust mask is not worn.
- Damage to hearing if effective hearing protection is not worn.
Health defects resulting from vibration emission if the power tool is being used over longer period of time or not adequately managed and properly maintained.
WARNING! This machine produces an electromagnetic field during operation. !
This field may under some circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with
medical implants to consult their physician and the medical implant manufacturer before operating this machine.
Intended Use
The HYPM1600E is an electrical paddle mixer from HYUNDAI. The HYPM1600E uses a
standard M14 fitment, 380mm Mixing shaft, supplied with a K3 style Mixing
Paddle. It is powered by a 1600W Motor. Maximum miscible material is 40-90
litres.
This machine is for DIY home and garden use, specifically pedestrian. The
machine is manufactured according to the latest safety requirements. Every
precaution is only effective when it is followed exactly.
Intended Use
This machine was designed and manufactured for thorough, even mixing of
chemicals, liquids and building materials.
User Types
This machine is intended for use by consumers, i.e. non professional
operators. The machine is intended for “DIY” and domestic use only.
Improper Use
Any other usage not in keeping with the above mentioned ones may be hazardous
and harm persons and/or damage things.
Personal Protective Equipment
Appropriate Personal Protective Equipment (PPE), MUST be worn at all times
when operating or repairing the machine. No protective equipment can ensure
100% protection.
When selecting PPE, make sure it’s CE marked and it suits the user in terms of
size, fit, etc. If more than one item of PPE is worn at the same time, make
sure they can
be used together, e.g. wearing safety glasses may disturb the seal of a
respirator, causing air leaks.
| Hand Protection Must Be Worn
Protective electrically non-conductive gloves are highly recommended when
working.
---|---
****| Foot Protection Must Be Worn
Non-skid heavy duty footwear are highly recommended when working.
| Hearing Protection Must Be Worn
Suitable safety hearing protection is recommended.
| Eye Protection Must Be Worn
Always wear safety glasses/goggles and/or face shields. Everyday eyeglasses
have only impact resistant lenses; they are not safety glasses/goggles.
| Protective Clothing Must Be Worn
Do not wear loose clothing, gloves, scarfs, neckties or jewellery (rings,
wrist watches), which can be caught in moving parts.
| Head Protection Must Be Worn
Wear a safety helmet with a safety visor.
| Face Shield Must Be Worn
Wear a face shield to protect your face.
Symbols On The Machine
We have provided safety messages in this manual and on the machine. This
information alerts you to potential hazards that could hurt you or others.
Please read these messages carefully. However, we may not have listed all of
the possible hazards, you must also use your own judgement.
Symbol | Description | Symbol | Description |
---|---|---|---|
**** | Safety alert – Indicates a precaution, a warning or a danger. |
Disconnect the mains plug if the cord becomes damaged or entangled.
| Do not expose to rain.|
| Class II tools symbol.
| Disconnect the mains plug before working on the machine.| | Sharp blades
can cut limbs.
| Read operator’s manual.| | Keep bystanders at a safe distance away from the
work area.
| The UKCA (UK Conformity Assessed) marking is a UK product marking that
is required for goods being placed on the market in Great Britain (England,
Wales and Scotland).| ****| This product complies with the European
directives and an evaluation method of
conformity for these directives was done.
| This product should not be disposed of in
domestic waste. Please contact your local recycling centre for disposal
service.| |
Unboxing
WARNING : Unboxing and assembling the machine should be done on a flat,
surface with enough room. Disposal of the packaging should be done in
accordance with the local regulations in force. !
WARNING : Some of the packaging material may be harmful to children. Keep
out of reach of children.
- Carefully remove the product from the packaging and examine it for any sign of damage caused during shipping.
- Lay the contents out and check them. If any part is damaged or missing, you must not use the machine. Contact HYUNDAI POWER PRODUCTS immediately.
- You must keep the packaging material in case the machine needs to be returned or repaired.
- Ensure that you have all the accessories and tools you need for assembly and operation including the suitable personal protective equipment.
We recommend that you fill out the information in the ‘Product Record’ section. If you need to contact an authorised dealer or customer service, you may need to provide this information.
In The Box
A Mixer Main Body
B Mixing Shaft
Attached to the Spindle (G).
C Mixing Paddle
A K3 style mixing paddle, connects to the mixing shaft (B). A standard M14
fitment.
D 2 x Spanners
E 2 x Spare Carbon Brushes
F 5 Piece Trowel Set
Features
A Mixer Main Body
B Mixing Shaft
Attached to the Spindle (G).
C Mixing Paddle
A K3 style mixing paddle, connects to the mixing shaft (B). A standard M14
fitment.
G Spindle
The output from the 1600W Motor.
H Gear Selector Switch
Switches the Spindle (G) speed between 0-600rpm(Max) to 0-900rpm(Max).
I Trigger Safety Button
This helps prevent accidental starting by pressing the trigger.
J On/Off Trigger
This is used to start and stop the machine.
K Maintenance Plug
Used for Carbon Brush maintenance (Included).
Assembly
Assembly Overview
There are 4 steps to the assembly:
Step 1 : Combine Mixing Paddle and Mixing Shaft
Step 2 : Attach Mixing Shaft to Spindle
Step 3 : Tighten Shaft and Spindle Using Spanners
Step 4: Tighten Mixing Paddle and Shaft Using Spanners
STEP 1 : Combine Mixing Paddle and Mixing Shaft
- By hand, turn the mixing shaft (B) into the mixing paddle (C).
STEP 2 : Attach Mixing Shaft to Spindle
- By hand, turn the mixing shaft (B) into the spindle (G) until tight.
STEP 2 : Attach Mixing Shaft to Spindle (Continued)
Troubleshooting
If when trying to tighten the mixing shaft (B) into the spindle (G) and it’s
rotating, ensure the gear selector is in a gear position, and use one of the
spanners included on the grooves on the spindle (G).
STEP 3 : Tighten Shaft and Spindle Using Spanners
- Using the included spanners, tighten the mixing shaft (B) to the spindle (G). Turn Spanner 1 clockwise and Spanner 2 in the opposite direction.
This step is made easier by laying the paddle mixer down.
STEP 4 : Tighten Mixing Paddle and Shaft Using Spanners
-
Using the included spanners, tighten the mixing shaft (B) to the mixing paddle (C). Turn spanner 1 clockwise and spanner 2 in the opposite direction.
! This step is made easier by laying the paddle mixer down. -
The Paddle mixer is ready for operation. The mixing shaft must point as shown.
WARNING! This machine should not be operated until the user manual is read and understood. Correct PPE and safety measures must be followed.
Operation
Mixing Tips
- When mixing cement or mortar, add dry ingredients to container first followed by liquids. This will prevent dust becoming airborne.
- If mixing plaster or cement, roughly combine any powdered materials with liquids, mixing with a trowel/small spade first. This will avoid risk of harmful powders/dust becoming airborne.
- When mixing paints/chemicals, start the machine slow and build speed. Without easing in splashing/spilling can happen.
- If the machine doesn’t mix your material as thoroughly as required, other attachments can be purchased from 3rd party DIY/Construction retailers. Make sure they are compatible with the M14 threaded spindle.
- Clean your Paddle Mixing heads after use, this will prevent any contamination between different materials, and corrosion of the heads over time.
Before Operation Check
- Check the Mixing shaft and Paddle are secured tightly.
- Check the condition of the cable, if damaged do not use.
- Ensure the work area is tidy and free of any obstacles.
- Never operate the machine if it is damaged in any way.
Included Trowel Features
280mm Carbon Steel
Plastering Float This is used to ensure that plaster is as flat and smooth as
possible.| 280mm Carbon Steel
Brick Trowel
This trowel is used for levelling, spreading and shaping mortar, cement or
concrete.| 180mm Carbon Steel
Gauging Trowel A smaller trowel used for smaller applications in more confined
areas.
150mm Carbon Steel
Pointing Trowel This trowel is used to finish
joints with mortar or cement, with a pointed nose to get into tight areas.|
13mm Brick Jointer
Used for smoothing the joints between bricks in
a wall. Creates a more uniform and better looking finish.
Trowel Care
- Ensure Trowels are washed and dried after every use.
- Treat with anti-rust oil to prevent long term corrosion.
Using The Paddle Mixer
Ensure the mixing container is secure, on a flat surface. An unstable mixing
container is likely to tip and/or spill causing harm or danger.
- In a secure mixing container, fill with the material to be mixed.
- Submerge the mixing paddle.
Starting
YOU MUST read and understand the full user manual before starting the
machine. Before connecting to the mains supply, always check the switch is in
the OFF position.
-
Press the trigger safety button (I). The machine will not start if not pressed.
-
Whilst pressing the trigger safety button (I), with a firm grip on both handles, gently squeeze the On/Off trigger (J) to start. The trigger safety button (I) can be released
during operation. -
The trigger is analogue, the further it is pressed the faster the motor will spin. Spindle speed will depend on trigger position.
Stopping
WARNING : Always switch off machine before placing it down.
- Release the On/Off trigger (J).
- Unplug from the mains supply.
Adjusting Spindle Speed
- Turn the gear selector switch to change gear from ‘I’ to ‘II’. This will change the spindle speed from 600rpm (max.) to 900rpm (max.)
Maintenance & Care
Carbon Brush Replacement
**** The machine MUST be UNPLUGGED from mains power at all times during maintenance. The carbon brushes should be checked and maintained in 60 hour intervals. You may need to change the carbon brushes if you experience loss of machine performance, or intermittent power.
- With a flat blade screw driver, remove the maintenance plug (K).Carbon Brush Replacement (Replacement)
- Remove carbon brush and replace with one included. Replace both sides at the same time.
- Replace the maintenance plug (K) and tighten with a flat blade screwdriver. ! If the machine does not operate after maintenance, please contact us.
General Maintenance
WARNING : Turn OFF the machine, allow all moving parts to come to a
complete stop, and disconnect the power cord before maintaining the machine.
You need to wear proper clothing and protective gloves whenever your hands are
at risk.
-
Keep all nuts, bolts and screws tight to be sure the machine is in a safe working condition.
-
Replace worn or damaged parts for safety. Only use manufacturer recommended parts and accessories.
! Storage
**** Keep the machine stored in a dry, level area away from damp, moisture and rain fall. Allow the machine to cool down before storing. -
Make sure the machine is clean and dry before storing.
-
Put the blade cover on the blade when in storage.
-
Ensure the machine is stored in a position, where any persons cannot step on, to attempt to reach items up high, due to risk of movement.
-
DO NOT store the machine near an ignition source, such as a wood stove, gas or electric heater, or an appliance or heater with a pilot light.
-
Store the machine out of reach of children or anyone who is not familiar with operation.
-
DO NOT stack other items on top of the machine when in storage.
-
Make sure the machine is stored away from direct sunlight. Store indoors or in a safe, frost-free area during severe weather and winter months.
Cleaning
Always remove the electric plug from the mains supply before any cleaning is
undertaken.
- Remove any grass and mud after each use to prevent it from drying. Use a clean cloth to remove dirt, grease, etc.
- DO NOT use any water on any part of the main machine.
- Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
- Always ensure that ventilation openings are kept clear of debris. !
Troubleshooting
NOTE : All corrective actions should be carried out by suitably qualified person/s.
Problem | Possible Cause | Possible Solution |
---|---|---|
Machine will not start. | Fuse in mains plug blown | |
/ faulty | Check fuse in mains plug |
and replace is necessary.
Internal wiring fault.| Contact your service
dealer.
Machine functions intermittently.| Internal wiring fault.| Contact your
service
dealer.
Technical Data
Specification
Model | HYPM1600E |
---|---|
Voltage | 230V |
Frequency | 50Hz |
Input Power | 1600W |
No Load Speed | Speed I : 0-600rpm |
Speed II : 0-900rpm
A-Weighted Sound Pressure Level LpA| 92dB(A)
A-Weighted Sound Power Lever LWA| 103dB(A)
Uncertainty K.| 3dB(A)
Guaranteed Sound Power Level (in accordance with 2000/14/EC)| 92dB(A)
Vibration (in accordance with EN 62841-2)| 3.157m/s2
K=1.5m/s2
Net Weight (Paddle Mixer Assembled)| 5.5kg
Net Weight (Trowel Set)| 1.3kg
Dimensions
Assembled Height | 890mm |
---|---|
Assembled Width | 330mm |
Cable Length | 4 Metres |
Recycling & Disposal
Recycling & Disposal
We do not offer a takeback scheme for the recovery of Waste Electrical
Electronic Equipment (WEEE) & Batteries. Instead the responsibility to dispose
of WEEE and/or
Batteries is passed onto you by us.
So when it becomes necessary to dispose of your machine you must take it to
your local Civic Amenity Site. For further information please contact your
local Authority for disposal advice. You MUST make sure that all unused oil
and fuel is disposed of correctly either beforehand or at your local Civic
Amenity Site.
- Under NO circumstances must any fuel or oil be put down any drains.
- Certain products contain WEEE waste which should not be disposed of in your domestic waste.
- You MUST recycle WEEE in accordance with your local authority or recycling centre.
- Certain products contain batteries which should not be disposed of in your domestic waste.
- You MUST recycle batteries in accordance with your local authority or recycling centre.
- Unwanted packaging and materials should be stored and taken to a recycling centre so it can be disposed of in a manner which is compatible with the environment.
We are a Member of the VALPAK National Compliance Scheme and our registration
number is RM08660. For further information about disposal please contact your
Local Authority.
You can also get more advice and guidance about recycling at the following
website http://www.recycle-more.co.uk
Should you pass this product on to another user either sold or loaned, you
MUST pass on this user manual. This will make sure that all other users can
use and maintain this machine safely.
Environmental Protection
- Environmental protection should be a priority of considerable importance when using the machine, for the benefit of both social coexistence and the environment in which we live. Try not to cause any disturbance to the surrounding area.
- You must comply with local regulations and provisions for the disposal of packaging, oils, fuel, filters, damaged parts or any elements which have a strong impact on the environment. This waste must not be disposed of as normal waste. It needs to be separated and taken to specified waste disposal centres where the material will be recycled.
- You must comply with local regulations for the disposal of waste materials after mowing.
- When disposing, do not pollute the environment with the machine, but hand it over to a disposal centre, in accordance with the local laws in force.
EU Declaration Of Conformity
Importer and Authorised Representative
Genpower Ltd
Isaac Way, Pembroke Dock, SA72 4RW
Country of Origin: China
Description: 1600W Paddle Mixer
SKU Code : HYPM1600E
Date of Issue: 12/04/2021
Regulations and Directives of Compliance
- 2006/42/EC The Machine Directive
- 2014/30/EU EMC Directive
- 2000/14/EC Noise Emissions
- 2011/65/EU RoHS
Statement of Declaration
We the importer and authorised representative of the product described confirm
conformity within the provisions of applicable regulations and directives
listed within this document.
Signed on Behalf of Genpower Ltd
Place of Issue: Genpower Ltd
Signatory Name: Roland Llewellin
Position: Managing Director
Notes………………………….
Useful Information
Check Out Our YouTube Channel Our videos on YouTube include:
- Unboxing
- Assembly of your machine
- How to service your machine
- Products in use
- ‘How To’ videos
- Product features
Go to YouTube and search ‘Hyundai Power Products’.
Warranty
Proof of purchase will be required before you make a warranty claim. Full
warranty terms and conditions can be found on the HYUNDAI POWER PRODUCTS
website:
www.hyundaipowerproducts.co.uk
Manual Updates
Our manuals are constantly being reviewed and updated. Should you find an
error, omission or something unclear, please contact us for assistance. We
reserve the right to make any modifications without prior notice whenever
necessary. Our latest manuals are also placed online. All our manuals can be
downloaded at:
www.hyundaipowerproducts.co.uk
Returning Your Product
If you are returning your product, please contact the dealer for their returns
policy.
Leaving A Review
We work very hard to give all of our customers the best possible service. If
you have any problems, before leaving negative feedback, please contact us to
give us a chance to resolve the issue. We would be delighted if you left us
positive feedback! To leave a review, please go to:
uk.trustpilot.com/review/hyundaipowerequipment.co.uk
Ordering Spare Parts
You can find the spare part you are looking for at power-spares.co.uk
Product Record
Information
As soon as you have purchased the machine, we recommend that you fill out the
following. If you need to contact an authorised dealer or customer service for
information on servicing, you may need to provide the following information.
Date Of Purchase:…………………………………………………………………………………..
Dealer Name:………………………………………………………………………………………..
Dealer Phone:………………………………………………………………………………………..
Model Number:………………………………………………………………………………………
Serial/Batch Number:………………………………………………………..……………………..
Contact Us
Need Help? Talk To Our Experts
Our friendly aftersales team will be more than happy to help you.
Phone
Call our team on 01646 687 880
Email
aftersales@hyundaipowerproducts.co.uk
**** Online Live Chat
Go to www.hyundaipowerproducts.co.uk
Post
Genpower Ltd, Isaac Way, Pembroke Dock, Pembrokeshire, SA72 4RW.
Hyundai Support Website Go to
hyundaisupport.co.uk
Importer:
GENPOWER LTD
Isaac Way, London Road,
Pembroke Dock, UK, SA72 4RW.
T: +44 (0) 1646 687 880
E: info@hyundaipowerproducts.co.uk
www.hyundaipowerproducts.co.uk
Imported / Distributed by Genpower Ltd for the United Kingdom & Ireland
Licensed by Hyundai Corporation, Korea
References
- Spare Parts For Hyundai Power Products | Fast Shipping | Power-Spares
- HYUNDAI POWER PRODUCTS UK Reviews | Read Customer Service Reviews of hyundaipowerequipment.co.uk
- Hyundai Power Products | Garden Machinery | Power | Tools
- Everything you need to know to Recycle More