Johnson Controls QZ2142-840 IQ Smart Dimmer Installation Guide

: June 10, 2024
: Johnson Controls

Table of Contents

Johnson Controls QZ2142-840 IQ Smart Dimmer
Product Information
Product Specifications
Product Usage Instructions
PRODUCT INSTALLATION INSTRUCTION
FEATURES & OVERVIEW
SPECIFICATIONS
INSTALLATION INSTRUCTION
FCC NOTE
ABOUT COMPANY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Johnson Controls QZ2142-840 IQ Smart Dimmer

Product Information

The IQ Smart Dimmer is a Z-Wave device that can be used to convert any outlet into a smart outlet. It allows users to control the On/Off function and dimming of lamps with dimmable light bulbs. Additionally, it serves as a repeater in the Z-Wave network, extending and improving the mesh network in locations where it is installed.
It is important to note that this device is not suitable for use with motor-operated appliances, non-dimmable fluorescent lighting fixtures, or transformer-supplied appliances. The lighting devices connected to this Z-Wave module must not exceed 200W incandescent, 100W dimmable CFL/LED, 120VAC 60Hz (CFL), or LED lighting with dimmable LED/CFL code on box or device.

Product Specifications

Compatible with Z-Wave networks
Acts as a repeater in the Z-Wave network
Maximum load: 200W incandescent, 100W dimmable CFL/LED, 120VAC 60Hz (CFL), or LED lighting with dimmable LED/CFL code on box or device

Product Usage Instructions

This is a quick guide for experienced installers only. For detailed installation instructions, please refer to dealers.qolsys.com (login required).

PRODUCT INSTALLATION INSTRUCTION

Step 1: Determine Installation Location
Select an appropriate location to plug in the IQ Smart Dimmer.
Step 2: Prepare the Panel to Enroll the IQ Smart Dimmer
Ensure that the IQ Panel is ready to enroll the IQ Smart Dimmer. Plug in the device at the desired location.
Step 3: Pairing with the IQ Panel

1. From the Z-Wave menu, select Add Device
2. Press the button on the side of the IQ Smart Dimmer three times quickly to enroll it with the IQ Panel
3. Complete the pairing process by touching Add and customizing the name if desired
4. Press the Include button to finalize pairing
5. Test the device to ensure proper function

If you have any questions or issues with installation or usage, please contact tech support at intrusion-support@tycoint.com.

FEATURES & OVERVIEW

The IQ Smart Dimmer can be used to turn any outlet into a smart outlet to turn lamps On, Off, or control dimming of any lamps with dimmable light bulbs. Each Z-Wave device also serves as a repeater in the Z-Wave network, extending and improving the mesh network in the installed location.
The IQ Smart Dimmer is a Z-Wave Plus® certified device and includes S2 security and SmartStart. You can now add this device securely and with ease using QR code on the box or device.
Use Locations:
- Kitchen
- Living Room
- Basement
- Bedrooms
- Garage
  WARNING: Do not install to control a motor-operated Appliance, a non- dimmable fluorescent lighting fixture, or a transformer-supplied appliance. The lighting devices connected to this Z-Wave module must not exceed 200W incandescent, 100W dimmable CFL/LED, 120VAC 60Hz

SPECIFICATIONS

Works with incandescent and most dimmable florescent (CFL), or LED lighting
700 Series Z-Wave module
LED to indicate ON/OFF status
Remotely or manually turns ON or OFF lights
Controls light fixtures up to 200W Incandescent and 100W Dimmable LED/CFL
Z-Wave Plus Certified with S2 security and SmartStart (QR code on box or device)
Grounded 3-pin AC power receptacle to enhance safety
Compact design – does not block the 2nd AC outlet
Supports Network Wide Inclusion (through a repeater)
Functions as a Z-Wave signal repeater
Indoor Use Only
Operating ambient temperature 0°C – 40°C
Class II
Purpose of control: Operating Control;
Construction of control: Portable Direct Plug In Type;
Type 1 Action;
Pollution Degree: 2
Impulse Voltage: 1500 V
Not Suitable for Appliances which only allowed to be plugged into wall outlet or a single outlet circuit, such as room heaters and window air conditioners.

INSTALLATION INSTRUCTION

STEP 1: DETERMINE INSTALLATION LOCATION****
STEP 2: PREPARE THE PANEL TO ENROLL THE IQ SMART DIMMER
STEP 3: PAIRING WITH THE IQ PANEL

FCC NOTE

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1. this device may not cause interference
2. this device must accept any interference, including interference that may cause undesired operation of the device.