PLANAR PLN2700 LED LCD Monitor User Guide

PLANAR PLN2700 LED LCD Monitor User Guide

Operation Instructions

Thank you for purchasing the PLN2700 monitor. Please read this guide thoroughly be fore installation.

FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)

This LED LCD Monitor has been tested and found compliant with the limits for Class Bdigital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installation. This LEDLCD Monitor generates, uses, and can radiate radio frequency energy. Harmful interference toradio communication may be the result if it’s not properly installed and used. However, thereis no guarantee that interference will not occur in a particular installation. If this LEDLCDM nitro does cause serious interference to radio or television reception, resetting a correct it. Moreover, users are encouraged to reduce interference by doing one or more of the following:

• Reorient or relocate the receiving antenna.
• Move the LED LCD Monitor and the receiver further away from each other.
• Connect the LED LCD Monitor into an outlet on a circuit different from that to which there ceiver is connected.
• Consult your local dealer or a qualified technician.

FCC Warning:
To assure a continued FCC compliance, a user must use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized changes or modifications to this LED LCD Monitor would void the user’s authority too perate this device.

Note: If necessary, shielded interface cables and AC power cord must be usedtomeet the emission level limits

Shielded cables must be used with this unit to ensure compliance with the Class BFCC limits.

According to WEEE regulation, this LED LCD Monitor can’t be handled as normal trash in Europewhenit is out of usage. Please refer to the recycle information on Planar’s website to handle it. For more information on how to recycle your product, please visit http://www.planar.com/about/green/

COMMUNIQUE D’AVERTISSEMENT DE LA FCC CONCERNANT LES INTERFERENCEDEFREQUENCE RADIO: (SEULEMENT POUR MODELES CERTIFIE PAR LA FCC)

Unpacking Instructions

• Remove the LED LCD Monitor out of the package and take off EPE Foam.
• Remove stand and base from EPE Foam and attach to base.
• Adjust the display between -5° and 15°.

Safety Precautions

Follow all warnings, precautions and maintenance as recommended in this user’s manual tomaximize the life of your unit.

DO :

• Turn off the product before cleaning.
• Surface may be cleaned using a soft clean cloth moistened with mild window glass commercial cleaners or 50/50 mixture of water and isopropyl alcohol.
• Use a soft cloth moistened with mild detergent to clean the display housing.
• Disconnect the power plug from AC outlet if the product is not going to be used for an extended period of time.

Don’t :

• Do not touch the LED display screen surface with sharp or hard objects.
• Do not use abrasive cleaners, waxes or solvents for your cleaning.
• Do not operate the product under the following conditions:
  • Over 16 hours per day.
  • Extremely hot, cold or humid environment.
  • Areas susceptible to excessive dust and dirt.
  • Near any appliance generating a strong magnetic field.
  • In direct sunlight.
• If smoke, abnormal noise or odor emits from your LED LCD Monitor, remove the power cord immediately and call your service center.
• Never remove the rear cover of your LED LCD Monitor. The display unit inside contains high-voltage parts and may cause electric shock
• Never try to repair your LED LCD Monitor yourself. Always call your service center requalified technician to fix it.
• Due to safety concerns, if the VESA mounting kit is purchased separately, please makes ure the mounting kit is UL-listed, and replaceable only by service personnel.

Package Overview

• LED LCD Monitor

• Stand

• Base
  

• HDMI Cable

• Power Cord

• User’s Guide
  

First Setup

Install the Stand Base

1. Lay the LED LCD Monitor flat on a table with the LED screen face down. To prevent the LED LCD Monitor from being scratched, put a piece of soft cloth on the table on which the screen will be set.
2. Insert Stand into the monitor, then plug in Base to Stand to secure, as shown below.
3. Stand the LED LCD Monitor up
   

Disconnecting the Stand Base

1. Lay the LED LCD Monitor flat on a table with the LED screen face down. To prevent the LED LCD Monitor from being scratched, put a piece of soft cloth on the table on which the screen will be set.
2. Press the release button and pull away the monitor to remove the stand from them on it or.
3. Pull the release lever and pull away to remove base from stand.
   

Front View of the Product

The symbols on the front correspond to the buttons on the back

1. Menu / Exit
2. Brightness / Down
3. Blue Light Reducer / Up
4. Input select / Enter
5. Power On / Off
6. LED Indicator

*Hot keys Instructions please see “Basic Operation” on page11-12

1. Power Input (AC input)
2. HDMI Input (HDMI 19 pin)
3. VGA Input (VGA 15 pin)
4. Audio Output (EARPHONE)
5. Kensington Lock

Quick Installation

1. Connect either HDMI or VGA Video Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. Please note the monitor ships than HDMI cable only.
2. Connect the power cord to a properly grounded AC outlet, then to the monitor.
3. Power-ON computer and then POWER-ON the monitor.
4. Set the timing mode on your computer. Recommended resolution and refreshrateis1920x 1080@60Hz.
   

Basic Operation

Before using the LED LCD Monitor:

• Connect external equipment properly.
• Insert the power plug, and the power LED indicator will light orange.

Power On/Off
To turn the LED LCD Monitor on/off: Press button on the back. The power LED indicator light will be blue when the LEDLCD Monitor is on.

Using the OSD Menu’

Use OSD menus to adjust settings by using the menu button on the front of the LEDLCD Monitor.

| Displays main menu
---|---
Exits from OSD menu
| Selects between VGA or HDMI
| Select the desired item when in OSD menu
When not in OSD menu, directly enters Brightness Menu
| Select the desired item when in OSD menu
When not in OSD menu, directly enters Blue Light Reducer Menu

OSD lock out Function

When LED LCD Monitor is on and the OSD menu is not activated, the “Lock Out” function cane enabled.

Option 1: OSD lock-all 4 buttons are locked except the “POWER” button. Press and hold the button for 5 seconds to lock the OSD buttons.

The LED LCD Monitor will show an “OSD locked” message for 5 seconds and them message will disappear automatically

Repeat this step to unlock

Option 2: OSD & Power button lock-all 5 buttons including the “POWER” button arelocked. Press and hold the button for 5 seconds to lock all 5 buttons

The LED LCD Monitor will show a “Power button locked” message for 5 seconds and the Message will disappear automatically

Repeat this step to unlock.

OSD Menu

BRIGHTNESS

• BRIGHTNESS: Adjust backlight levels
  Adjust between 0-100.

• CONTRAST: Adjust contrast levels
  Adjust between 0-100.

• PICTURE MODE : Select from preset modes
  Standard, Movie, Game, Text.

• OD: Turn Overdrive on or off
  ON/OFF.

• BLUE LIGHT: Reduces blue light
  OFF: Video (15% reduction), Web Browsing (30% reduction), Reading (50%reduction), Low Light(70% reduction)
  

IMAGE

• H. POSITION: Adjust contrast levels
  Adjust between 0-100.

• V. POSITION: Adjust contrast levels
  Adjust between 0-100.

• CLOCK: Adjust contrast levels
  Adjust between 0-100.

• PHASE: Adjust contrast levels
  Adjust between 0-100.

• ASPECT : Select aspect ratio
  Wide, 4:3.
  

COLOR TEMP

• COLOR TEMP : Choose color temperature
  User, Warm, Normal, Cool Under USER, the following colors can be adjusted

• R: Red
  0-100

• G : Green
  0-100

• B : Blue
  0-100
  

RESET

• IMAGE AUTO ADJUST: Adjust display automatically
  (Only available in VGA input).

• RESET : Reset to factory defaul
  
  

MISC

• SIGNAL SOURCE : Select Input source
  HDMI, VGA

• VOLUME : Adjusts volume of earphone
  0-10

Supporting Timing Modes

Note:
HDMI supports 480i, 480p, 576i, 576p, 720p, 1080i, and 1080p

Warning 1.: The equipment is only suitable for mounting at heights ≤ 2 m. Attention

Technical Information

Standby Mode: < 0.5Watt Off: < 0.3 Watt
Displayable Resolution| FHD 1920×1080 m
Pixel Dimension| 0.31125(H)x0.31125(
Display Color| 16.7M
Tilt| -5° ~ 15°
Active Display Area| 597.6mm x 336.15mm
Temperat| Operating: 5° ~ +40° Storage: -20° ~ +6
Compliance| FCC-B, CE, UL/cUL
Power| AC 110V~24

Wall-Mount Installation Instructions

Attaching The Optional Wall Mount Arm (not supplied)
Follow these steps to finish installing the wall mounting arm:

1. Place the wall mounting arm onto the back of the LED LCD Monitor. Line up the holes of the arm with the holes in the back of the monitor.
2. Insert the 4 screws into the holes and tighten.
3. Reconnect the cables. Refer to the User’s Guide that came with the optional wall mounting arm for instructions on attaching it to the wall.
   

NOTE
100 mmx100 mm VESA high hole (n=4), M4, pitch =0.7 mm screw mounting kit not included.

Care and Maintenance

Care

• Avoid exposing your LED LCD monitor directly to sunlight or other heat source. Place your LEDLCD monitor away from the sun to reduce glare.
• Put your LED LCD monitor in a well ventilated area.
• Do not place any heavy things on top of your LED LCD monitor.
• Make certain your LED LCD monitor is installed in a clean and moisture-free area.
• Keep your LED LCD monitor away from magnets, motors, transformers, speakers and TV sets.

Note

• Move the LED out of the package and take off the plastic bag and Polystyrene Foam.
• Pull the base from Parallel versus Panel to Vertical.
• Adjust the Panel within -5° leaning forward and 15°leaning backward.

Troubleshooting

No power

• Make sure A/C power cord is securely connected to the power adapter and the power supply if firmly connected to the LED LCD Monitor.
• Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage.
• Make sure all signal cables are installed

Power on but no screen image

• Make sure the video cable supplied with the LED LCD Monitor is tightly secured to the video output port on back of the computer. If not, tightly secure it.
• Adjust brightness

Wrong or abnormal colors

• If any colors (red, green, blue) are missing, check the video cable to make sure it is securelyconnected. Loose or broken pins in the cable connector could cause an improper connection.
• Connect the LED LCD Monitor to another computer.

Planar Support

Cables and Accessories
To find cables and accessories for your Planar monitor, touch screen or other Planar products visit our online store at www.PlanarOnline.com.

Technical Support
Visit Planar at http://www.planar.com/support for operations manuals, touchscreen drivers, warranty information and access to Planar’s Technical Library for online troubleshooting. To speak with Planar Customer Support please have your model and serial number available and dial:

Planar Support
Tel: 1-866-PLANAR1 (866-752-6271) or + 1 503-748-5799 outside the US.
Hours: 24 hours a day, 7 days a week.
Toll or long distance charges may apply

European Product Database for Energy Labelling (EPREL)
PLN2700 Registration number: 1054411

Planar Systems, Inc.

Customer Service
24×7 Online Technical Support: http://www.planar.com/support
1195 NE Compton Drive, Hillsboro, OR 97006
Tel: 1-866-PLANAR1 (866-752-6271), or + 1 503-748-5799 outside the United States, Hours: 24 hours a day, 7 days a week

© 11/2021 Planar Systems, lnc.
Planar is a registered trademark of Planar Systems, Inc. Other brands and names arethe property of their respective owners. Technical information in this document is
subject to change without notice.

References

• Planar LED & LCD Video Walls & Display Solutions | Planar
• Planar Environmental Initiatives | Planar
• Planar Support | Planar
• Planar LED & LCD Video Walls & Display Solutions | Planar

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>