Swann NHD-1200BE Enforcer Bullet Security Camera Instruction Manual

Enforcer™ Bullet
Security Camera
12MP Video for NVRs
Instruction Manual

Introduction

Congratulations on the purchase of your Swann Enforcer™ Bullet Security Camera.

• 12MP video with sensor spotlight, siren plus red & blue flashing light
• Microphone & Speaker allows you to talk to visitors & warn intruders
• True Detect™ Heat & Motion sensing for reliable alerts
• Powerful Night2Day™ color night vision
• Works in rain & snow all year round

Important instructions

1. Make sure the camera is fixed correctly and stable if fastened in place.
2. Never place strain of any kind on the network ca- ble connection. It’s designed to clip into the Ethernet port, but it won’t support weight and can be broken.
3. Do not operate if wires and terminals are exposed.
   Important Note: All jurisdictions have specific laws and regulations relating to the use of cameras. Before using any camera for any purpose, it is the buyer’s responsibility to be aware of all applicable laws and regulations that limit the use of cameras.
   About this Manual: The content in this manual is for information purposes only and is subject to change without notice. While every effort is made to ensure that this manual is accurate at the time of printing, no liability is assumed for any errors occurred.

For instructions on how to configure your camera for motion detection, changing image settings, and other functions available, please consult the manual for your NVR. Go to support.swann.com, search for your model, then download.

Connecting the Camera

To connect the camera to your NVR, simply connect the supplied Ethernet cable to the LAN connection on the camera then plug the other end of the cable into one of the camera inputs on the back of your NVR.

Please note: The power connector is provided as an alternative power option if required. Your NVR will provide power over the Ethernet cable when connected and a separate power adapter is not required.

Mounting the Camera

The camera can be mounted onto a flat surface using the screws and wall plugs provided. The flat surface must have sufficient strength to hold the camera.
→ Position the camera in the location you want to mount it, and mark the screw holes on the surface to position the screws (mounting template included). Then, using the appropriate screws for the flat surface you’re fixing the camera to, secure the camera in place.
→ If you’re mounting to a wooden surface, screw the camera directly to the surface.
→ If you’re mounting to a masonry surface (bricks, concrete or similar), you’ll need to use wall plugs.
Aiming the camera

1. Loosen both screws (use an Allen Key) to adjust the camera’s orientation. This enables you to rotate the camera left or right so no matter what direction or orientation it’s facing, your images will be the right way up. Tighten each screw to secure it in place.
2. Loosen the screw to tilt the camera up or down. Tighten the screw to secure it in place.
3. To pan the camera left or right, loosen the screw and position it accordingly. Tighten the screw to secure it in place.

Fitting the Weather Protector

The weather protector provides a weather-resistant shield for the camera’s Ethernet connector to prevent damage from moisture, dust, and other external factors that could interfere with the electrical connection. We also recommend you seal the joins with electrical tape to ensure a more weatherproof seal.

1. Place the Rubber-O-ring around the Camera Ethernet Connector.
2. Carefully push the Ethernet Cable through the Seal Cap and then the Seal Tube.
3. Connect the RJ45 Connector on the Ethernet Cable to the Camera Ethernet Connector ensuring the locking tab securely clicks in.
4. Align the lugs inside the Seal Tube to the Camera Ethernet Connector, then rotate the Seal Tube to lock it in place. The Rubber O-ring should become slightly bulged when the Seal Tube has been correctly connected.
5. Gently open the pre-cut slit of the Foam Weather Seal and wrap it around the Ethernet Cable between the Seal Tube and the Seal Cap. Push this into the Seal Tube until it is almost all the way in.
6. Firmly push the Seal Cap over the end of the Seal Tube and rotate it clockwise to screw it on to the Seal Tube. Continue to tighten until the Foam Weather Seal bulges slightly from the end.

Camera Location Tips

1. Take into consideration what you want to monitor and where you’ll get the best view of it.
2. How you’re going to connect the camera to your monitoring system; remember that cables and connections should be kept out of the weather.
3. How to keep the camera out of harm’s way. We recommended mounting your camera at an elevated position.
4. Place your camera as close to the area of interest as practicable. The best position is from about 13ft/4m above looking slightly down, keeping in mind the details you are looking for.
5. Although the sky looks nice when you look at the live view from your camera, it is an unlikely direction for an offender to approach. Make sure your camera has minimal sky in it as the light in daylight can make the foreground of the image darker.
6. Think about the most likely way a potential offender may approach your home, use your camera to give you the best coverage of these areas.
7. The camera’s casing is resistant to different weather conditions and tampering. It would take an overwhelming event to damage the housing.
8. The camera is weather and water-resistant but, prolonged exposure to adverse weather conditions such as sunlight and excessive moisture can damage the internal components.
9. Run cables inside a wall cavity or other protected enclosure, and ensure that all wiring and connectors are insulated and protected from moisture.
10. Don’t put your cable near live electrical wiring. AC electricity generates radio noise, which can interfere with the signal from your camera.

Helpdesk & Resources 
Visit Swann Support Center at support.swann.com. You can register your product for dedicated customer support, download guides, find answers to commonly asked questions, and more.

Product Registration
Product Manuals
Support Community
Customer Support
Frequently Asked Questions
M1200BECAMREV1E | © Swann 2022

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>