NAPOLEON 70077 ACCU-PROBE 2.0 Bluetooth Thermometer User Manual

70077 ACCU-PROBE 2.0 Bluetooth Thermometer

Product Information

The Napoleon Thermometer (Model No. 70077) is a device that allows temperature monitoring of food while cooking. It comes with a serial number label and a warranty of 1 year for manufacturing defects. The device is compatible with additional 2-piece probe kit (#70078) which needs to be purchased separately. It is advised to keep the stainless steel probe sensors and cords away from children and not expose them directly to flames or temperatures exceeding 572F / 300C.

Features

• Temperature monitoring of food while cooking
• Additional 2-piece probe kit (#70078) is available for purchase
• Compatible with different models and manufacturing standards of devices

Cleaning and Maintenance

The probe jacks, probe cables, and display unit are water-resistant but should not be left in the rain. The device should never be immersed in water or used in a microwave oven or on a rotisserie. The stainless steel probe sensors and cords need to be handled with care and always wear a heat-resistant glove to touch them during and right after cooking.

Product Usage Instructions

1. Apply the serial number label from the carton to the device.
2. Check that the cooking area does not exceed the maximum temperature and cords are not kinked or frayed by closed doors or lids.
3. Place each ring around the probe tip and push till it reaches the base holder.
4. Point the tips downward, but do not allow the tips of probes to touch the grill grates.
5. Position the cord at a high exit point so the cord stays sufficiently above the grill when the lid is closed.
6. Connect the probes to the device, and the device to a compatible device.
7. Monitor the temperature of the food while cooking.
8. After use, clean the device by wiping it with a damp cloth. Do not put it in the dishwasher as it could damage the device.

Following these instructions will ensure safe and effective use of the Napoleon Thermometer.

WARNING

• Do not place the ACCU-PROBE 2.0™ Bluetooth® Thermometer on hot or magnetic surfaces or inside any appliances.
• The display unit and probe cords should never be immersed in water.

WARNING

• Use a heat resistant glove to touch the cords or stainless steel probes during cooking.
• Do not try to clean the probes without reading the “MAINTENANCE” instructions in this manual.
• Do not operate the probe and cables to temperatures outside the range of -4⁰F to 572⁰F / -20⁰C to 300⁰C.

THANK YOU FOR CHOOSING NAPOLEON®
The Napoleon® ACCU-PROBETM Bluetooth Thermometer allows you to program your type of meat, target temperature, and cooking time either on the touch-key display unit or using your smart device with the Napoleon App. When your food is cooked to perfection, the thermometer will alert you on your smart device.
A digital thermometer will also help reduce the chance of dried, overcooked meat caused by cutting for a visual examination, and help make cooked food look more presentable. You do not need to wait by the grill to monitor the cooking status. This saves you time and leaves you free to attend to your guests. Download the Napoleon® ACCU-PROBE 2.0TM App and enjoy smart cooking!
Any use of such marks and logos as indicated are owned by the respective owners and any such use by Wolf Steel Ltd. is under license: Bluetooth® by Bluetooth SIG, Inc. Other trademarks and trade names are those of the respective owners: Android™ and Google Play™ are trademarks of Google Inc.; Apple, iPhone®, and the Apple App Store is a trademark of Apple Inc.; iOS is a trademark or registered trademark of Cisco Inc.

Napoleon President’s 1 Year Limited Warranty
NAPOLEON warrants that components in your new NAPOLEON product will be free from defects in material and workmanship from the date of purchase, for a period of 1 year from date of purchase.

If this product fails to meet your expectations for any reason, please email our customer solutions department or visit our Website for more information.
NORTH AMERICA:

• Website: www.napoleon.com
• Email: grills@napoleon.com
• Phone: 1-705-726-4278
• Customer Solutions: 1-866-820-8686

EUROPE:

• Website: www.napoleon.com
• Email: eu.info@napoleon.com

Conditions and Limitations

NAPOLEON warrants its products against manufacturing defects to the original purchaser only, provided that the purchase was made through an authorized NAPOLEON dealer and is subject to the following conditions and limitations:
This factory warranty is non-transferable and may not be extended what-so-ever by any of our representatives. This limited warranty does not cover damages caused by misuse, lack of maintenance, grease fires, extreme environments, accident, alterations, abuse or neglect. Discoloration to plastic parts from chemical cleaners or UV exposure is not covered by this warranty.
This limited warranty further does not cover any damage determined to be caused by heat or water.
NAPOLEON will not be responsible for: environmental conditions such as interference caused by other operating devices.
The bill of sale or copy will be required together with a serial number and a model number when making any warranty claims from NAPOLEON.
NAPOLEON reserves the right to have its representative inspect any product or part prior to honoring any warranty claim.
NAPOLEON shall not be liable for any transportation charges, labor costs, or export duties.
WARNING : This product can expose you to chemicals including di(2-ethylhexyl)phthalate, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• This instruction manual contains important information for the proper assembly and safe use of the Bluetooth® thermometer.
• Read and follow all warnings and instructions before using the appliance.
• ACCU-PROB 2.0E™ Bluetooth® Connected Thermometer app requires a Bluetooth-ready iOS or Android device.
• The app is available for free from the App StoreSM or Google Play™ store.

Features

• 49.5″ / 125.73 cm long water-resistant probes
• Cord wraps for tangle-free storage
• Measures food temperature from -4⁰F to 572⁰F / -20⁰C to 300⁰C
• 160′ / 50 m Bluetooth receptivity
• Magnetic mounting
• Temperature indication
• LCD display
• Custom Temperature Settings
• Manual shut-off
• Temperature readouts with or without Bluetooth connection

Where this thermometer may be used:

• Gas and Electric Stovetops
• Ovens, Convection Ovens
• Gas and Electric Grills
• Charcoal Barbecues
• Smokers

Packaging Contents

• 1 Napoleon ACCU-PROBE 2.0TM Bluetooth® Thermometer
• 2 AAA Alkaline Batteries
• 2 Detachable Stainless Steel Probes with corded plugs
• 2 Probe Wraps
• 4 Color Probe Indicators
• Quick Start Guide

The Napoleon ACCU-PROBE 2.0TM Bluetooth® Thermometer (#70077) can work with 4 stainless steel probes simultaneously.
An additional 2-piece probe kit (#70078) is available for purchase at your closest Napoleon dealer.

Compatible Devices
The ACCU-PROBE 2.0™ Bluetooth® Thermometer app is designed to work with a wide range of Android and iOS devices such as iPhone®, iPad mini™ and iPod®.
Device compatibility may not be guaranteed due to numerous different models and manufacturing standards.

Napoleon ACCU-PROBE 2.0™ Bluetooth® Thermometer

Cleaning and Maintenance

• CAUTION! Keep the stainless steel probe sensors and cords away from children. Use care when handling the probes. Always wear a heat resistant glove to touch the stainless steel probe sensors or cords during and right after cooking. Do not use probe cables or rings to move probes.

• CAUTION! Do not use the probes in microwave ovens or on a rotisserie.

• Clean the probes before using for the first time.

• Hand wash the metal portion of probes and dry thoroughly after each use. Do not wash in a dishwasher.
  NOTE: The probe jacks, probe cables and display unit are water resistant but should not be left in the rain. The appliance should never be immersed in water.

• Probes are rust-proof and corrosion resistant. Do not use any chemicals or cleaning solutions to clean the probes except mild soap.

• Use the cord wraps for tangle-free cord storage and to prevent kinks and folds.

• Store Bluetooth thermometer at ambient temperatures ranging from 0 ⁰C to 35 ⁰C/ 32 ⁰F to 95 ⁰F

• Only use alkaline or carbon zinc batteries. Remove batteries when storing for long periods of time.

Safeguards

• Probes can operate within -4⁰F to 572⁰F / -20⁰C to 300⁰C

• Probe cords can operate within -4⁰F to 716⁰F / -20⁰C to 380⁰C

  • Do not allow the probes to be directly exposed to flames or temperatures exceeding 572⁰F / 300⁰C.

• For accurate readings, insert the probes into the center of meat ideally before it is placed on the grill.

  • Point the tips downward, but do not allow the tips of probes to touch the grill grates.
    Also try to ensure that probes do not touch the grill.

• Place meat on the side of the grill closest to the thermometer.
  Position the cord at a high exit point so the cord stays sufficiently above the grill when the lid is closed.
  Alternatively, probe handles may be positioned under the lid seal. Ensure the sides of the grill do not exceed the highest operating temperature.

• When using more than one probe, colored probe rings can help identify the number of each probe. Place each ring around the probe tip and push till it reaches the base holder.

Check Clearance Prior to Cooking
Check that the cooking area does not exceed the maximum temperature and cords are not kinked or frayed by closed doors or lids.
First check the cord clearance at ambient temperature with the cooking unit closed; examine the cord for any severe kinking or bending.
Then turn the temperature unit on and use the probe to examine hot spots where the cord may make any surface contact.

Napoleon ACCU-PROBE 2.0™ Bluetooth® Thermometer

1. Current Temperature – displays current temperature of the probe being used
2. Probe Indicator – displays the current probe number being displayed
3. Cycling Icon – the device is in display cycling mode
4. Alert Sound Icon – indication of Alert Sound is set
5. Bluetooth® Icon – indicates the connection status of Bluetooth®
6. Battery Status – indicates the status of the batteries
7. Temperature Units of Measure – °C/°F
8. Probe / Unit (°C/°F) Button – toggles to select different probes / select different temperature units in °C/°F
9. Power Button – turns on/off the device
10. Alarm/Bluetooth® Button – switches on/off the alert sound or the Bluetooth® connection
11. Battery compartment cover
12. Probe Sockets – 4 sockets for 4 probes

Napoleon ACCU-PROBE 2.0™ Bluetooth® Thermometer – Getting Started

1. Install batteries (included)
   • Remove the battery compartment cover using a screwdriver.
   • Install two “AAA” alkaline or carbon zinc batteries in the compartment as indicated by the polarity symbols. If the batteries are good, the unit will beep and the display will appear.
   • Do not use rechargeable or lithium batteries as these can pose a hazard near high-heat areas.
   • Re-secure the battery compartment cover using a screwdriver. Ensure the thermometer displays a digital readout when powering on.
2. Initial Setup
   • Power: Press once to turn on the unit. Press for 3 seconds to turn off the unit.
   • Alarm / Bluetooth: The thermometer and smart device will alert you to temperatures. Press once to enable/disable the alarm sound of the unit. Press for 2 seconds to turn on/off the Bluetooth® function.
   • Probe / Unit (⁰C/⁰F): Press once to toggle probe 1, 2, 3, 4 in cycling mode. Press for 2 seconds to change the temperature unit ⁰C/⁰F.
3. Set up the Thermometer
   • The temperature will only display when a probe is inserted into the unit.
   • Select a probe/cord storage wrap and unwrap the plug end of the cord.
   • Insert the plug into one of the four sockets behind the unit. Make sure the probe is firmly inserted.
   • To identify the probe socket: When facing the back of the unit, sockets are numbered 1 to 4 from left to right (coloured blue to black).
   • Once the probe is inserted, the PROBE icon in the top left corner will reflect the position of the last probe to be inserted.
4. Connect the Bluetooth® Thermometer with a Smart Device. See the following pages for details.

Connect the Thermometer with the Smart Device (first time):
Follow these steps to pair your Smart device. Pair it close to the thermometer to eliminate risk of interference.

1. On your Smart device:

   • Ensure you have Internet access and WIFI is turned on in your Settings. Also ensure Bluetooth® setting is On. (For subsequent use, ensure Location and Sound is turned on.)
   • Download and install the app called Napoleon ACCU-PROBE 2.0 application which is available from the Apple App Store or Google Play store. When prompted, give permission to access files and settings.
   • After the app has been installed, open it. If necessary, the app will direct you to the smart device’s setting page to switch on Bluetooth for installation.

2. On the ACCU-PROBE 2.0TM thermometer unit:
   Press the Power button once to turn on the thermometer display.
   Hold the Alarm / Bluetooth button for 2 seconds to turn on Bluetooth®. The Bluetooth® icon will flash when the thermometer is in pairing mode.

3. On your Smart device:
   In the ACCU-PROBE 2.0TM app, select the ACCU-PROBE 2.0TM Bluetooth® Thermometer device when it appears in the list of available Bluetooth devices.
   In the initial startup, the app may ask for permission to access to your Smart device files and location. Allow access for the app to be connected.
   Once the app is selected, you can start using it.

4. On the thermometer unit: When the Bluetooth® icon is visible but no longer flashing, it is paired with the app or no longer seeking to pair with a device.
   Note: Pair the Bluetooth® connection in the ACCU-PROBETM app and not in the device Settings.
   You cannot proceed to use the app until the ACCU-PROBETM Bluetooth® Thermometer device appears in the list and is selected.

Quick Troubleshooting:
Refresh or restart the app and/or Bluetooth® thermometer as necessary. Refer to Troubleshooting if any problem arises.
If necessary, familiarize yourself with basic device settings such as how to connect / disconnect Bluetooth® from device Settings, and download from the App Store or iTunes.

• To close the app on an iPhone (iOS), quickly double-click the Home button twice or swipe up for newer model iPhones, and swipe the app window. Then reopen the app from the home screen icon.
• To close the app on an Android, simply use the back arrow to Home screen or minimize the window and close out by clicking “X”.

To uninstall the app:

• iOS – Hold the ACCU-PROBE 2.0 app icon on the home page for 2 seconds and select the remove app option from the list. This should Uninstall the app.
• Android – Go to your device settings, navigate to the ACCU-PROBE app and Uninstall app or hold the app icon on the home page and select Uninstall from the options.

If the app is not working for various reasons, restart the app and disconnect the Bluetooth® connection from the app or device Settings. Reinstall the app as shown in Steps 1 – 3 above.

For additional support after installing the app, refer to the troubleshooting section or resource links on the Napoleon website.

Troubleshooting Chart

This is a list of common troubleshooting steps to help correct typical situations that might occur when pairing the app with the thermometer unit.
On the thermometer unit, always ensure that the Bluetooth® logo icon is flashing, indicating it is ready to pair with a Smart device.

• Check Internet connection.
• Connect to Internet via WIFI and download the app from the App
• Store or Google Play.
• Follow prompts to automatically install and open the app.
• Check for the app icon on home screen.
• Uninstall and reinstall app if needed. (Look under Downloads)
• Allow the app full access to files and your location.

The app is installed but shows a screen with a probe is not connected text|

• Ensure probes are properly inserted into the slots on your ACCU- PROBE thermometer device.
• Maximize Bluetooth® receptivity by facing the LCD display on the
• thermometer with the Smart device in close range.
• Completely close the app and restart it. (Be familiar with your
• device’s basic operations and Settings.)
• Close out any unnecessary programs on the Smart device that may be consuming memory.

The app worked before, but the device name is not listed in the app device list.|

• App is not searching or not able to find the device.
• Click “Try again” if on the no devices found page or hit the back
• button on the devices found page to restart scan
• Turn the thermometer off and on. Ensure Bluetooth® is activated in the mobile Smart device Settings.
• Bring the Smart device close to the thermometer unit.
• Refresh the memory cache by closing and reopening the app.
• Ensure your device’s Location setting is turned on.
• Wait about 30-60 seconds between steps.

The thermometer lost the Bluetooth® connection while in operation and shows a connection lost page|

• Try to locate cause of frequency interference or physical
• obstruction.
• Bring Smart device back within range of the thermometer (50 m/160‘) or line of sight.
• Toggle the thermometer unit off & on.
• Reopen the app as a last resort.

The alarms are not working.|

• Check Bluetooth® connection.
•  Check appropriate Sounds or Notifications are turned on in your Smart device settings.
• Check that alarm (or vibrate) notification is selected in the
• ACCU-PROBETM app settings.

ACCU-PROBE Bluetooth Thermometer Use
Each probe can be assigned its own single temperature or a custom high and low temperature range. This is useful to test cooking doneness or temperature of thawed meat.
The first two bottom buttons will allow you to choose high or low cooking temperatures and help decrease ongoing wear and tear on the probes and cords:

The probes tab is used for setting preset, custom, or grill temperatures. Additional alerts for your cook can also be set here. The thermometer alarm will sound when the target temperature set has been reached.

The timer setting is useful for spot-checking the temperature manually – ideal for fast cooking at high temperatures – or for reminders of various items being cooked simultaneously.

The third button displays the app settings. Users can change temperature units, edit notification sounds as well as contact support in this tab.

Probe Placement
To find the best insertion point, place the tip of the probe in the deepest part of the meat, and away from any bones. Wait for the temperature readout to stabilize, then move the probe around to find the lowest temperature and leave the probe there.

WARNING: Never allow the probe to touch the grill, especially at the tip.

Meat Cooking Chart
The below temperatures and settings are built in to the app dial. Select the desired temperature setting for each probe and click OK.

Meat| Doneness| Minimum Temperature
| Well Done| 1
160°F/71°C
| Medium Well| 150°F/66°C
Beef| Medium| 140°F/60°C
| Medium Rare| 130°F/54°C
| Rare| 120°F/49°C
| Customized|
| Well Done| 155°F/68°C
Pork| Medium Well| 145°F/63°C
| Low n slow| 190°F/87°C
| Customized|
Ground meat| Well Done| 160°F/71°C
| Customized|
Chicken/Turkey| Well Done| 165F/73C
| Customized|
Duck/Goose| Well Done| 165°F/73°C
Customized|
| Well Done| 145°F/62°C
Fish| Medium| 135°F/54°C
| Customized|
| Well Done| 160°F/71°C
| Medium Well| 150°F/66°C
Lamb| Medium| 140°F/60°C
Medium Rare| 130°F/54°C
| Rare| 120°F/49°C
| Customized|
Lobster| Low & Slow Customized| 145°F/63°C
Baked Potato| Finished| 210°F/99°C
| Customized|
Apple/pumpkin pie| Finished| 175°F/79°C
| Customized|
Others| Enter a custom temperature|
et BBQ Temperature| Enter a High/Low temperature range|

1. Minimum temperatures recommended by major cookbooks and the USDA for food safety.

Temperature Alarms
A temperature alarm will sound when a selected or custom temperature setting is reached, regardless of the visibility of the applicable probe.
The temperature alert feature can be used for additional monitoring. You can set customized alerts for specific temperatures.

Timer Alarms
Timer alarms can be set up for repetitive cooking tasks such as turning over meat, and when time data needs to be saved.

Timers are helpful when cooking at high temperatures with or without a temperature probe.

Individual timers can be assigned descriptive labels and also probes that have been setup and connected.

The label and time data will be stored each time the app is turned off.

Use the timer to remind when to gently add spices and seasoning. This will help prevent damage to the meat fibers.

Saved Profile
The saved profile feature is useful for settings that are frequently utilized during cooks.
Save your preferred cook settings and simply load it when setting up a probe for a quick and easy setup. You can save up to 10 different cook preferences/settings.

Live Graphs
Live graphs can be used to monitor and track the temperature changes over a short period of time. The live graph feature automatically gets initiated once a probe has been setup.
Custom temperature alerts are also visible on the graph.

Bluetooth® Range Alarm
A built-in alarm will sound when the Smart device is taken out of the Bluetooth® Thermometer range. Simply bring the device back into range and the program will continue running.

Regulations

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Place Bluetooth device and thermometer in a position that is directly facing each other.
• Increase or decrease the separation between the device and thermometer.
• Ensure the internal probe wire or probe is not damaged or has not shorted out either through moisture or excessive heat.
• Move the apparatus away from other network interference such as other Bluetooth and WiFi emitters.
• Avoid operating between or near concrete walls and other barriers that may dampen Bluetooth receptivity.

Caution: To comply with the limits for an FCC Class B computing device, always use the shielded signal cord supplied with this unit.

CE REGULATIONS
The normal function of the product may be disturbed by strong Electro-Magnetic Interference. If so, simply reset the product to resume normal operation by following the instruction manual. In case the function could not resume, please use the product in another location.

Correct Disposal Of This Product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Website: www.napoleon.com

References

• Napoleon® Canada | Barbecue Grills, Fireplaces, Heating & Cooling
• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>