GRAUGEAR G-M201-AC-10G USB Type-C Enclosure User Manual

GRAUGEAR G-M201-AC-10G USB Type-C Enclosure

Package Contents

• G-M201-AC-10G
  

• Silicone Thermal Pad
  

• Type-C® cable
  

• Type-C® to **Type-A cable

**

• Screwdriver
  

• SSD mounting screw
  

• Heat sink
  

• Manual
  

• Warranty card
  

Features

• Supports PCIe 3.0 x2 transfer speed up to 10 Gbit/s USB 3.2 Gen2
• Fully compliant waterproof with IP66 specification
• Premium Aluminium Case with Excellent Cooling Effort
• Bundled with silicon thermal pad and heat sink for better cooling down during high speed transfer.
• Compatible with M.2 NVMe SSD in M Key spec and size of 2280, 2260, 2242, 2230
• Supports Windows® and MacOS®

Specification

• Internal Interface : M.2 M-Key
• External Interface : USB3.2 Gen2 Type-C®
• Controllers : JMS583
• Support SSD : M.2 NVMe SSD 2280, 2260, 2242, 2230
• Transfer Speed : USB3.2 Gen 2 10Gbit/s ( Theoretic )
• Product material : Aluminium Alloy / Plastic
• Cable length : 35cm/13.78 inches

Hard Disk Drive Installation

1. Remove the 2 screws from the case.

2. Pull out the PCB tray.

3. Place the thermal pad on the SSD, put the heat sink on the top, insert the SSD, and then fix with the screw

4. Push back the PCB tray and reattach the front cover with the 2 screws, The installation is complete.

Safety information Safety information

Please read carefully the following information to prevent injuries, damage to material and device as well as data loss:

Warning levels
Signal words and safety codes indicate the warning level and provide immediate information in terms of the probability of occurrence as well as the type and severity of the consequences if the measures to prevent hazards are not complied with.

Warns of a directly hazardous situation causing death or serious injury.
Warns of a potentially hazardous situation that may cause death or serious injury.
Warns of a potentially hazardous situation that may cause minor injury.
Warns of a potential situation that may cause material or environmental damage and disrupt operative processes.

Risk of electrical shock

Contact with parts conducting electricity
Risk of death by electrical shock

• Read the operating instructions prior to use
• Make sure the device has been de-energised prior to working on it
• Do not remove contact protection panels
• Avoid contact with conducting parts
• Do not bring plug contacts in contact with pointed and metal objects
• Use in intended environments onl
• Operate the device using a power unit meeting the specifications of the type plate only!
• Keep the device/power unit away from humidity, liquid, vapour and dust
• Do not modify the device
• Do not connect the device during thunderstorms
• Approach specialist retailers if you require repairs

Hazards during assembly(if intended)

Sharp components
Potential injuries to fingers or hands during assembly(if intended)

• Read the operating instructions prior to assembly
• Avoid coming into contact with sharp edges or pointed component
• Do not force components together
• Use suitable tools
• Use potentially enclosed accessories and tools only

Hazards caused by a development of heat

Insufficient device / power unit ventilation
Overheating and failure of the device / power unit.

• Prevent externally heating up components and ensure an exchange of air
• Do not cover the fan outlet and passive cooling elements
• Avoid direct sunlight on the device/power unit
• Guarantee sufficient ambient air for the device/power unit
• Do not place objects on the device/power unit

Hazards caused by very small parts and packaging

Risk of suffocation
Rash of death by suffocation or swallowing

• Keep small parts and accessories away from children
• Store/dispose of plastic bags and packaging in an area that is inaccessible to children
• Do not hand over small parts and packaging to children

Potential data loss

Data lost during commissioning
Potentially irreversible data loss

• Always comply with the information in the operating instructions/quick installation guide
• Exclusively use the product once the specifications have been met
• Back up data prior to commissioning
• Back up data prior to connecting new hardware
• Use accessories enclosed with the product

Cleaning the device

Harmful cleaning agents
Scratches, discoloration, damage caused by moisture or short circuit in the device

• Disconnect the device prior to cleaning
• Aggressive or intense cleaning agents and solvents are unsuitable
• Make sure there is no residual moisture after cleaning
• We recommend cleaning devices using a dry, anti-static cloth

Cleaning the device

Environment pollution, unsuitable for recycling
Potential environmental pollution caused by components, recycling circle interrupted
This icon on product and packaging indicates that this product must not be disposed of as part of domestic waste. In compliance with the Waste Electrical and Electronic Equipment Directive (WEEE) this electrical device and potentially included batteries must not be disposed of in conventional, domestic waste or recycling waste. If you would like to dispose of this product and potentially included batteries, please return it to the retailer or your local waste disposal and recycling point.

If you have any questions, please do not hesitate to contact our support at
support@graugear.de or visit our website at www.graugear.de
© Copyright 2021 by CHAB GmbH. All Rights Reservedhlstedter Strasse 17, 22949 Ammersbek / Germany
Made in China

References

• GRAUGEAR - USB Enclosures, USB Adapters, USB Hubs, M.2 SSD Cooling and PS5 SSD Heatsink more

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>