GRAUGEAR G-M2HP04-F Heat Pipe Cooler Instruction Manual
- June 10, 2024
- GRAUGEAR
Table of Contents
Heat Pipe Cooler
for M.2 2280 SSD
G-M2HP04-F
Package Contents
Features
-
Heat Pipe from Copper maximum performance.
25mm PWM fan which is able to control the speed of fan by changing temperatures -
Reduced M.2 SSD temperature up to 60%
-
Designed for desktop computers.
-
Compatible with Single/Double sided M.2 2280 SSD.
Specification
- Fan Rated Voltage : DC12V
- Fan Rated Current : 70mA(Max 90mA)
- Fan Rated Speed : 8500RPM
- Fan Dimension : 25x25x10 mm
- Fan Cable Type : 4 Pin (Connection to MB SYS_FAN)
- Cable length : 500mm
- Air flow : 2.87CFM
- Dimension : L80 mm x W24.5 mm x H54 mm
- Weight : 95 g
- Heat Pipes : 5mm heatpipe x 2
Installation
- Unscrew all 4 screws and remove the bracket from Heatsink.
- Install the M.2 SSD with thermal pads into bracket and reattach the bracket with 4 screws
- Place the Heat Pipe Cooler with M.2 SSD into the M.2 slot of motherboard and attach the SSD mounting screw.
- Plug the 4 Pin connector into the 4 Pin socket on the motherboard and the installation is complete.
Safety information
Please read carefully the following information to prevent injuries, damage to
material and device as well as data loss:
Warning levels
Signal words and safety codes indicate the warning level and provide immediate
information in terms of the probability of occurrence as well as the type and
severity of the consequences if the measures to prevent hazards are not
complied with.
DANGER Warns of a directly hazardous situation causing death or serious
injury.
WARNING Warns of a potentially hazardous situation that may cause death
or serious injury.
CAUTION Warns of a potentially hazardous situation that may cause minor
injury.
IMPORTANT Warns of a potential situation that may cause material or
environmental damage and disrupt operative processes.
1. Risk of electrical shock
WARNING
Contact with parts conducting electricity
Risk of death by electrical shock
- Read the operating instructions prior to use
- Make sure the device has been de-energised prior to working on it
- Do not remove contact protection panels
- Avoid contact with conducting parts
- Do not bring plug contacts in contact with pointed and metal objects
- Use in intended environments only
- Operate the device using a power unit meeting the specifications of the type plate only!
- Keep the device/power unit away from humidity, liquid, vapour and dust
- Do not modify the device
- Do not connect the device during thunderstorms
- Approach specialist retailers if you require repairs
2. Hazards during assembly(if intended)
CAUTION Sharp components
Potential injuries to fingers or hands during assembly(if intended)
- Read the operating instructions prior to assembly
- Avoid coming into contact with sharp edges or pointed components
- Do not force components together
- Use suitable tools
- Use potentially enclosed accessories and tools only
Safety information
3. Hazards caused by a developent of heat
IMPORTANT Insufficient device / power unit ventilation
Overheating and failure of the device / power unit.
- Prevent externally heating up components and ensure an exchange of air
- Do not cover the fan outlet and passive cooling elements
- Avoid direct sunlight on the device/power unit
- Guarantee sufficient ambient air for the device/power unit
- Do not place objects on the device/power unit
4. Hazards caused by very small parts and packaging
WARNING Risk of suffocation
Rish of death by suffocation or swallowing
- Keep small parts and accessories away from children
- Store/dispose of plastic bags and packaging in an area that is inaccessible to children
- Do not hand over small parts and packaging to children
5. Potential data loss
IMPORTANT Data lost during commissioning
Potentially irreversible data loss
- Always comply with the information in the operating instructions/quick installation guide
- Exclusively use the product once the specifications have been met
- Back up data prior to commissioning
- Back up data prior to connecting new hardware
- Use accessories enclosed with the product
6. Cleaning the device
IMPORTANT Harmful cleaning agents
Scratches, discolouration, damage caused by moisture or short circuit in the
device
- Disconnect the device prior to cleaning
- Aggressive or intense cleaning agents and solvents are unsuitable
- Make sure there is no residual moisture after cleaning
- We recommend cleaning devices using a dry, anti-static cloth
7. Cleaning the device
IMPORTANT Environment pollution, unsuitable for recycling
Potential environmental pollution caused by components, recycling circle
interrupted
This icon on product and packaging indicates that this product must not be
disposed of as part of domestic waste. In compliance with the Waste Electrical
and Electronic Equipment Directive (WEEE) this electrical device and
potentially included batteries must not be disposed of in conventional,
domestic waste or recycling waste. If you would like to dispose of this
product and potentially included batteries, please return it to the retailer
or your local waste disposal and recycling point.
If you have any questions, please do not hesitate to contact our support at
support@graugear.de or visit our website at
www.graugear.de
© Copyright 2021 by CHAB GmbH. All Rights Reserved
Ohlstedter Strasse 17, 22949 Ammersbek / Germany
Made in China www.graugear.de