GrauGear G-M2HS02 Cooling Kits User Manual
- June 10, 2024
- GRAUGEAR
Table of Contents
GrauGear G-M2HS02 Cooling Kits User Manual
Package Contents
Aluminum Heatsink
Copper Heatsink
4x Thermal Pad
8x Rubber Rim
Manual
Warranty card
Designed for Desktop PC
Specially designed for desktop computers, this M.2 SSD heatsink compatible
with M.2 2280 SSD, perfectly fit for high performance M.2 SSD.
Double-sided cooling
Aluminum alloy-Groove design, greatly increase the heat dissipation area, with
10°C – 30°C cooling effect (Varies depending on the environments), cool your
M.2 SSD to a safe temp to avoid overheating and throttling, improving the
performance of your computer.
Unique Nano Thermal Pad
Advancing Gene thermal pad is made from Nano Silicon Grease Material, with
good thermal conductivity ability. Soft enough and good ductility, compatible
with uneven surfaces of the M.2 SSD. Low viscosity, with no damage to the SSD
warranty label.
Fine Workmanship
Heatsink material: Aluminum alloy, anodic oxidation surface treatment.
Copper, passivated surface treatment
Aluminum Heatsink Dimensions: 70 x 22 x 10mm.
Aluminum Heatsink Net weight: 22g.
Copper Heatsink Dimensions: 70 x 20 x 3mm.
Copper Heatsink Net weight: 35g
M.2 SSD Installation
Aluminum Alloy Heatsink
-
Install thermal silicon, M.2 SSD, 1 and heatsink.
-
Put the aluminum alloy radiator 2 on two Rubber Rim
Copper Heatsink
-
Install thermal silicon, M.2 SSD, 1 and heatsink.
-
Put the aluminum alloy radiator 2 on two Rubber Rim
Safety information
Please read carefully the following information to prevent injuries, damage to material and device as well as data loss:
Warning levels
Signal words and safety codes indicate the warning level and provide immediate
information in terms of the probability of occurrence as well as the type and
severity of the consequences if the measures to prevent hazards are not
complied with.
DANGER: Warns of a directly hazardous situation causing death or serious
injury.
WARNING: Warns of a potentially hazardous situation that may cause death
or serious injury.
CAUTION: Warns of a potentially hazardous situation that may cause minor
injury.
IMPORTANT: Warns of a potential situation that may cause material or
environmental damage and disrupt operative processes.
Risk of electrical shock
WARNING: Contact with parts conducting electricity
Risk of death by electrical shock
- Read the operating instructions prior to use
- Make sure the device has been de-energised prior to working on it
- Do not remove contact protection panels
- Avoid contact with conducting parts
- Do not bring plug contacts in contact with pointed and metal objects
- Use in intended environments only
- Operate the device using a power unit meeting the specifications of the type plate only!
- Keep the device/power unit away from humidity, liquid, vapour and dust
- Do not modify the device
- Do not connect the device during thunderstorms
- Approach specialist retailers if you require repairs
Hazards during assembly(if intended)
CAUTION: Sharp components
Potential injuries to fingers or hands during assembly(if intended)
- Read the operating instructions prior to assembly
- Avoid coming into contact with sharp edges or pointed components
- Do not force components together
- Use suitable tools
- Use potentially enclosed accessories and tools only
Hazards caused by a developent of heat
IMPORTANT: Insufficient device / power unit ventilation Overheating and failure of the device / power unit.
- Prevent externally heating up components and ensure an exchange of air
- Do not cover the fan outlet and passive cooling elements
- Avoid direct sunlight on the device/power unit
- Guarantee sufficient ambient air for the device/power unit
- Do not place objects on the device/power unit
Hazards caused by very small parts and packaging
WARNING: Risk of suffocation
Rish of death by suffocation or swallowing
- Keep small parts and accessories away from children
- Store/dispose of plastic bags and packaging in an area that is inaccessible to children
- Do not hand over small parts and packaging to children
Potential data loss
IMPORTANT: Data lost during commissioning
Potentially irreversible data loss
- Always comply with the information in the operating instructions/quick installation guide
- Exclusively use the product once the specifications have been met
- Back up data prior to commissioning
- Back up data prior to connecting new hardware
- Use accessories enclosed with the product
Cleaning the device
IMPORTANT: Harmful cleaning agents
Scratches, discolouration, damage caused by moisture or short circuit in the
device
- Disconnect the device prior to cleaning
- Aggressive or intense cleaning agents and solvents are unsuitable
- Make sure there is no residual moisture after cleaning
- We recommend cleaning devices using a dry, anti-static cloth
Cleaning the device
IMPORTANT: Environment pollution, unsuitable for recycling
Potential environmental pollution caused by components, recycling circle
interrupted
This icon on product and packaging indicates that this product must not be disposed of as part of domestic waste. In compliance with the Waste Electrical and Electronic Equipment Directive (WEEE) this electrical device and potentially included batteries must not be disposed of in conventional, domestic waste or recycling waste. If you would like to dispose of this product and potentially included batteries, please return it to the retailer or your local waste disposal and recycling point.
If you have any questions, please do not hesitate to contact our support at
support@graugear.de or visit our website at
www.graugear.de
© Copyright 2021 by CHAB GmbH. All Rights Reserved
Ohlstedter Strasse 17, 22949 Ammersbek / Germany
Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>