ACCO BRANDS Z-2000 Air Purifier User Manual
- June 10, 2024
- ACCO BRANDS
Table of Contents
BRANDS
Z-2000 Air Purifier
User Manual
Z-2000 Air Purifier
| 
---|---
IMPORTANT: Before operation of the purifier, follow the steps and read
our Tru Sens Owners Guide at: www.trusens.com/Z-2000
Set up
Fig. 1)
Unscrew bottom cover and remove plastic bag from filter
Fig. 2)
Secure filter on bottom cover and replace inside the purifier
Fig. 3)
Plug-in your purifier and power on Plug-in your Sensor Pod™
For optimal results, place Sensor Pod™
on tabletop or counter across the room, within line sight of the purifier
Signal strength may vary by location Room coverage up to 35 m²
Control panel
Fig. 4)
Power on/off
Fan speed Auto/Whisper/1/2/Turbo
Dimmer on/off
Timer: 2h/4h/8h/12h
UV UV mode on/off
Reset Carbon/HEPA/UV replacements
0 – 50, Blue/Good50 – 100, Yellow / Moderate100+, Red/Poor
Sensor Pod indicator
Filter Replacement
| Filter type | Suggested emplacement / Cleaning | Item Number |
|---|---|---|
| A. | Washable Refilter | Washable Refilter |
Filt
B.| Carbon filter| Carbon filter| 2415106 (3-pack)
C.| HEPA Drum Filter| HEPA Drum Filter| 2415107 (includes A, B & C)
D.| UV Bulb| UV Bulb| 2415108
*Replacements indicator will glow red on control panel to notify you to change.
See Fig. 6) Use caution when using a screwdriver to remove the UV housing when
replacing the UV-C emitter.
www.trusens.com
©2019 ACCO Brands. All rights reserved. 21081P017
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>