Breville BBL920 the Super Q Brushed Stainless Steel Instruction Manual

: June 10, 2024
: Breville

Table of Contents

Breville BBL920 the Super Q Brushed Stainless Steel
BREVILLE RECOMMENDS SAFETY FIRST
Components
Components
Functions
Tips
Blending Chart (Jug)
Troubleshooting
Care & Cleaning
Breville Consumer Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Breville BBL920 the Super Q Brushed Stainless Steel

Breville-BBL920-the-Super-Q-Brushed-Stainless-Steel-product-
image

BREVILLE RECOMMENDS SAFETY FIRST

At Breville we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.

IMPORTANT c®us SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFENCE

Remove and discard all packaging materials and stickers before first use.
To avoid choking hazard for young children, remove and safely dispose the protective cover fitted on the power plug.
The appliance is for household only. Do not use it in moving vehicles or boats, do not use it outdoors, and do not use it for anything other than its intended use. Misuse can cause injury.
Close supervision is necessary when any appliance is used by or near children.
This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
Do not use the appliance near the edge of a countertop or table. Ensure the surface is level, clean and free of water and other substances. Please be aware that vibration during use may cause the appliance to move.
Do not use the appliance on ( or close to) a hot gas or electric burner, or where it could touch a heated oven or surface.
Do not allow the cord to hang over the edge of a countertop, or to become knotted.
This appliance is equipped with a power cord having a grounding wire with a grounding plug. The appliance must be grounded using a

3- hole properly grounded outlet. In the event of an electrical short circuit, grounding reduces the risk of electrical shock

If the power outlet is a standard 2-pron wall outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. Do not, under any circumstances, cut or remove the third (ground) prong from the power cord or use an adapter.
This appliance is equipped with a power cord having a grounding wire with a grounding plug. The appliance must be grounded using a 3- hole properly grounded outlet. In the event of an electrical short circuit, grounding reduces the risk of electrical shock
If the power outlet is a standard 2-prong wall outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. Do not, under any circumstances, cut or remove the third (ground) prong from the power cord or use an adapter.
In order to avoid the possible hazard of the blender starting by itself due to inadvertent resetting of the overload protector on the motor, do not attach an external switching device (such as a timer) or connect the blender to a circuit that can regularly switch the blender on and off.
Do not operate appliance with a damaged cord or plug, or after appliance malfunctions, or if dropped or damaged in any way. Immediately cease use
of the appliance and visit www.Breville.com or call Breville Consumer Support for examination, repair or adjustment.

SAFEGUARDS FOR YOUR BLENDER

Wash the blender jug with warm soapy water before first use.
Use only the blender jug and lid that is supplied with this blender. The use of attachments, including canning jars or accessones not manufactured or specified by Breville may cause the risk of fire, electrical shock, or injury.
Always ensure the blender is assembled properly before using. Lid must be firmly secured to the jug before operation to ensure internal contents do not escape, spray or overflow.
Always ensure the appliance is properly assembled as per instruction before use. Using the appliance without being properly assembled may cause product malfunction, product damage or pose safety risk including personal injury.
If the motor is straining under a heavy load, do not operate continuously for more than 10 seconds. Allow the motor to rest for 1 minute between uses on heavy loads. Note that none of the recipes in these instructions are considered a heavy load.
Do not leave the blender unattended when in use.
Flashing light indicates ready to operate. Avoid any contact with blades or moving parts.
Keep hands, fingers, hair and clothing away from the blender during use. Always turn blender off and unplug at the wall before reaching inside.
Be careful when handling the blender jug as the blades are very sharp. Be careful when emptying the jug and during cleaning. Mishandling of the blades may cause 1nJury.
Do not remove the jug from the motor base while blender is in use.
The blender is intended for food or drinks preparation. Do not use for anything other than food or drinks. Do not operate without any ingredients in the blender jug.
Never attempt to operate with damaged blades, or with utensils, or any foreign objects inside the blender jug.
To reduce the risk of severe injury to persons or damage to the blender, keep hands and utensils out of the jug while blending. The scraper and tamper provided can be used, provided the main lid is in place.
Never blend boiling hot liquids. Allow temperature to drop before putting into the jug for blending.
Be careful if hot liquid is poured into the blender, as it can be ejected out of the jug due to sudden steaming.
When blending hot liquids ensure inner measuring cap is in place. Cap will protect from splashing of hot liquids during blending and includes vents designed to relieve pressure and avoid steam build up.
When blending hot liquids, do not exceed the hot liquids maximum of 40oz. (1.2L).
Be careful removing the lid after blending hot liquids, as steam traps can form in the liquid and be ejected out of the jug.
Strictly observe the reduced capacity limit for blending hot ingredients. Failing to follow this instruction may cause personal injury by hot liquid burn.
Never blend hot ingredient/liquid using the vacuum blending feature. (Vacuum blending is an optional feature achieved through using the Breville Vacuum Pump supplied separately)
Never use attachments or accessories that are not supplied with this product or authorized by Breville to be used on this product. Failing to follow this instruction may cause product malfunction ‘ product damage or even pose safety risk
For optional accessories authorized by Breville to be used on this product, please read all instructions supplied with the accessory in conjunction with the instructions contained in this booklet.
Do not put the blender jug in extremes of heat or cold, for example placing a cold jug into hot water, or vice versa.
Before moving the blender, cleaning or putting it away for storage, always turn blender off and unplug at the wall.

BREVILLE ASSIST™ PLUG
Your Breville appliance comes with a unique Assist™ Plug, conveniently designed with a finger hole to ease removal from the power outlet.

SHORT CORD INSTRUCTIONS
Your Breville appliance
is fitted with a short power supply cord to reduce personal injury or property damage resulting from pulling, tripping or becoming entangled with a longer cord. If an extension cord is used, (1) the marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance, (2) the cord should be arranged so that it will not drape over the countertop or table-top where it can be pulled on by children or tripped over unintentionally and (3) the extension cord must include a 3-prong grounding plug.

When using the Personal Blender Attachment please note:
Opening a pressurized personal blender cup may lead to ingredients splattering, or may cause burning/scalding if the contents are hot.
To minimize the risk of this happening, always follow the instructions below:

Never blend hot or warm ingredients. Stop the blending process if contents become hot due to blending.
Never blend any ingredients for more than 1 minute. Blending for more than 1 minute may cause the ingredients to become hot and steam may cause the cup to become pressurized.
Never attempt to unscrew the blade from the base of the personal blender cup when the cup becomes pressurized due to steam build-up. Allow cup to cool to room temperature before carefully unscrewing the blade.
Never blend carbonated liquid, detergent, or any ingredient that could expand or generate a gas.
Never fill the personal blender cup beyond the cup’s indicated maximum capacity.
If leakage occurs during blending, immediately stop blending and unplug the unit from the power point. Check to ensure that the cup is not filled past the maximum level and that there is no damage to the seal or to the personal blender cup. Clean up the leakage with a dry towel and screw the cup firmly to the blending mechanism before resuming blending.

FOR HOUSEHOLD USE ONLY SAVE THESE INSTRUCTIONS

Components

Breville-BBL920-the-Super-Q-Brushed-Stainless-Steel-1

Rating Information
120V~ 60 Hz 1800W

Components

A. Inner measuring cup
Removable for quick addition of ingredients.
B. High performance lid
Withstands high velocity tasks, and is designed to vent steam and prevent splatter.
C. 68-ounce BPA-Free* jug
Impact resistant, shatter proof and dishwasher safe.
D. Extra-wide, heavy duty blade and bowl system
Designed with 4 powerful stainless steel blades contoured to the base of the jug for maximum cutting power and processing results including liquid-free processing.
E. Heavy duty metal coupling
For durable and long lasting performance under demanding conditions.
F. Heavy duty 1800W motor
High velocity power combined with high torque for outstanding results.
G. LCD indicator with timer
Counts down for pre-programmed settings, and counts up for speed dial settings.
H. Durable base
I. 5 preset programs
Optimize the blender’s capabilities for crushing ice, smoothies, green smoothies, frozen desserts and soups.
J. Overload protection
Resettable thermal fuse for motor protection.
K. Manual speed control
Wide speed range from super slow stir up to high speed milling for precise control.

ACCESSORIES

L. Scraper
Designed to push food down from the walls, or for easily removing ingredients after blending. Always use scraper with the blender lid on (inner cap removed).
M. Tamper
Helps make frozen desserts, nut butters and dips by pushing thick foods directly into the blades. Always use tamper with the blender lid on (inner cap removed).
N. Travel lid
Designed for fast, easy drinking on the go.
Q. BPA-Free* Personal blender cup Impact resistant, shatter proof and dishwasher safe.
P. Personal Blender Blade System For the Ii. Nest smoothies on the go.

CO POL YE STER MATERIAL
This blender jug is made with copolyester, which is a tough, BPA – Free polymer
used to make housewares products that can stand up to extreme use and repeated dishwasher cleaning. Products made from polyester are impact resistant and shatter resistant and stay clear and durable even after hundreds of cycles in the dishwasher.

BREVILLE ASSIST™ PLUG
Your Breville appliance comes with a unique Breville Assist·· Plug, conveniently designed with a finer hole for easy removal from the wall outlet.

Breville makes its BPA Free claim for this product based
on independent laboratory testing performed for all the food contact plastic materials of the product per EU Commission Regulation No !0/20ll. BPA Free Material is used in all parts that come into contact with food.

Functions

Breville-BBL920-the-Super-Q-Brushed-Stainless-Steel-2

GETTING STARTED

Ready mode
Press ON I OFF button to power the unit to READY mode.
Sleep
After 2 minutes of inactivity, LCD powers off, and the ON I OFF button fl.ashes red.
After 5 minutes of inactivity, the blender turns power OFF. Press the ON I OFF button to reactivate the blender.
VESSELS
This unit features two blending vessels. The Blender base automatically detects the vessel and adjusts blending times in pre-set programs to optimize food results.
68-ounce Jug
The jug is recommended for big volumes up to 68 ounces and can be used with all pre-set programs.
Personal Blender Cup & Blade System
The personal blender cup blends smaller volumes up to 700ml. The travel lid transforms it to a to go cup so it’s ideal for blended drinks.
Preset programs of PULSE I ICE CRUSH, SMOOTHIE and GREEN SMOOTHIE are enabled. The FROZEN DESSERT and SOUP program are not suitable to use with the Personal Blender accessories and pre-set programs are disabled PAUSE/ CANCEL
For Manual Blending:
First press pauses the selected speed. Second press cancels the selected speed. Tum the Dial to start blending again.
For Program Blending:
First press pauses selected program. Second press cancels the selected program. Press the program button to start the program again

MANUAL OPERATION

Speed Control Dial
Tum the Speed Control Dial clockwise
to select one of 12 speed settings from a slow STIR through to a very fast MILL.
To stop blending, turn the Speed Control Dial counterclockwise back to READY.
The blender is programmed to allow manual speeds to run for a total of 6 minutes (68-ounce Jug) or 30 seconds (Personal Blending Cup) before automatically stopping.

WARNING
Never blend boiling hot liquids. Allow temperature of ingredients to cool down to room temperature before placing into blender jug.

PRESET PROGRAMS

PULSE I ICE CRUSH
A program of continuous pulsing designed to chop food into an even consistency or crush ice cubes.

SMOOTHIE
For dairy-based smoothies. A combination of speeds and pulses designed to combine and aerate ingredients into a smooth and creamy texture.

GREEN SMOOTHIE
For blending whole fruits/vegetables into a smooth beverage. A combination of high speed profiles breaks down tough fibers into very fine particles. Use the tamper if necessary.

FROZEN DESSERT
A high speed program to break down frozen fruit/vegetables into a dessert ready to scoop. Use the tamper for best results.

SOUP
This program is exclusively for creating a Cold to Hot Soup – turning whole ingredients at room temperature into a smooth, hot soup. Primarily a high speed program, the program will finish with a
slow stir to remove steam bubbles.

NOTE
Raw foods such as meats and seafood need to be cooked prior to using the SOUP program.

WARNING
Do not add hot ingredients when using the SOUP program.

CLEAN
Use to remove most of the ingredients off the blender walls and blades. Add 4 cups of warm soapy water to the blender jug and press the CLEAN button. For harder to clean, sticky or thick ingredients, add ½ teaspoon of liquid dish detergent for extra cleaning power. For best results, clean the blender jug this way immediately after use.

NOTE
If the blender is running and you press a different preset button, it will switch to that program without stopping. If a program is running and you press the same program button again, it will pause that program and timer. To resume press the same program button again.

Tips

The inner measuring cap can be removed to add oils/liquids or other ingredients during blending. Extreme care must be taken as depending on the mixture volume and speeds of operation, splashes can eject from the lid. We do not recommend removing the inner measuring cap when blending hot liquid.
Do not exceed the maximum mark when adding foods and liquids into the blender.
Run the blender only for the appropriate amount of time required – do not over blend ingredients.
Use the PULSE I ICE CRUSH button when food is too thick or coarse to circulate within the blender jug.
The scraper and tamper accessories can be used during blending by removing the inner measuring cap. Always make sure the main lid stays firmly in place.
Ingredients may stick to the sides of the blender jug. To push food back onto the blades with the main lid on (inner cap removed), use the tamper provided to scrape down the sides of the jug, and continue blending.
If any moisture or liquid spills on top of the motor base during blending, tum the blender off and unplug from the outlet. Remove the blender jug, and wipe motor base immediately with a dry cloth or paper towel.
The optimum amount of ice cubes that the blender can process in the jug is 8 ounces (225g). That’s approximately 10 ice cubes.
When the blender has been running for 6 minutes in manual mode with the jug or 30 seconds with the personal blender cup, it will automatically tum off. This is a safety feature to protect the motor.
Thicker mixtures puree more efficiently if the jug is ¼ to ½ full.
Do not use metal utensils, as they may damage the blades or blender jug.
Dates and other dried fruits may vary in hardness and moisture content. If adding dried fruits to smoothies, use the tamper for the fi.rst 15-20 seconds of the SMOOTHIE or GREEN SMOOTHIE setting.
To make nut milks, add 1-2 cups of raw or soaked/drained nuts. Add 3-4 cups of purified water, and process on MILL for 1 minute. Strain through a nut milk bag (or muslin/cheesecloth) over a large bowl or jug.
Close bag and squeeze the pulp in the bag to extract as much milk as you can
To soak or not to soak nuts? This is a personal preference and you can make nut milks with unsoaked or soaked almonds. Almonds are a great source of protein however they contain a naturally occurring compound that may prevent our enzymes from digesting the nuts effectively. Try soaking nuts overnight to help break down the compound. Always rinse and drain soaked nuts before use.
Roasting nuts to make nut butter allows their natural oils to be released during blending, and enriches the flavor. Some nuts, such as almonds and hazelnuts, have a lower oil content. Add rice bran, macadamia or coconut oil when blending, if needed.
Freshly milled whole grain flour does not keep as long as commercial flours. This is because the inner layers of the grain contain rich oils, which can become rancid over time with exposure to heat and moisture. Always store your flour in an airtight container in a cool, dry place. Flour can be stored in the refrigerator or freezer in warm/humid climates.
Com, soy beans and some other dried legumes and grains vary in their moisture content, and may not circulate properly during milling. Use the scraper or tamper during milling to assist with circulation.
To remove any food that cannot easily be scraped out from under the blades, replace lid and tum blender back on high speed for 4-5 seconds to spin foods out from under blades.

Blending Chart (Jug)

Breville-BBL920-the-Super-Q-Brushed-Stainless-Steel-3

DRY MILLING
Please note that milling hard ingredients like spices, nuts, sugar, coffee, grains, etc. will cause scratching and clouding to the inside surfaces of the jug. This is a cosmetic result from milling these kinds of ingredients, and does not affect the performance of the jug.
Avoid over-processing spices though. Essential oils found in spices when combined with heat can damage the jug surface.

Breville-BBL920-the-Super-Q-Brushed-Stainless-Steel-4

This blending chart should be used as a guide only.

Troubleshooting

Motor doesn’t start or blade doesn’t rotate
- Check the blender jug and lid are securely in place.
- Check that the power plug is properly inserted into the power outlet.
- Check the ON I OFF button and selected function button is illuminated.
Food is unevenly chopped
- Use the tamper when blending to help move the ingredients around.
- Reduce the speed so the blades have more chance of grabbing the food.
- This can happen when too much food is being blended at one time. Try a smaller amount, and work in batches if necessary.
- The ingredients may be too large. Try cutting into smaller pieces. For best results, ingredients should be in pieces no larger than ¾-inch (2cm).
Food is chopped too fme or is watery
- Try blending for shorter period of time or slower speeds.
- Use the PULSE I ICE CRUSH function for better control.
Food sticks to blade and jug
- The mixture may be too thick. Try adding more liquid and/or using a slower speed for blending.
Blender overloaded
- This blender has dual motor protection features to protect against
  over heating and/or over current use. When activated, OVERLOAD PROTECTION will flash on the LCD and the blender will be inoperable.
- If activated, tum the blender off by pressing the ON I OFF button on the control panel, and unplug the blender. On the underside of the unit is a red RESET button Press the Button to reset the unit. Wait a few minutes then re-plug and power ON the blender.
- If OVERLOAD PROTECTION is still flashing, repeat and leave the blender to cool down for at least 20-30 minutes. Once OVERLOAD PROTECTION has disappeared from the screen the blender is ready to be used again.
- We recommend blending in smaller batches, or cutting ingredients into smaller pieces.

Care & Cleaning

Vessels and lids
In order to keep your jug clean and avoid food drying on the blades, vessels and lids, follow the below steps as soon as possible after use:

Rinse most of the ingredients off the vessels and lids.

68-ounce jug

Add 4 cups (around 11) of warm water and press the CLEAN button. If thick or sticky ingredients require extra cleaning power add a few drops of dish liquid detergent.
Rinse the jug and lid again and/or wash separately in warm soapy water with a soft cloth or bottle brush.

Personal blender attachments

All personal blender attachments are dishwasher safe on top shelf.
To help remove food residues from the blades and cup walls you can add 1 cup (240ml) of cold water to the personal blender cup and press CLEAN.
Rinse the cup with warm water afterwards.
If not clean yet, hand wash in warm, soapy water using a mild liquid detergent and non-abrasive sponge.

IMPORTANT
There is a risk of pressurization from hot water and/or detergent.
When rinsing your personal blender cup by using the CLEAN cycle, never add hot or even warm water, as the steam produced can create dangerous pressurization
Do not add detergent, as the foam produced will expand and may cause pressurization

WARNING
Oils in citrus rind can damage the material of the jug if left to sit on the jug for too long. Always clean your blender jug immediately after processing citrus rind.

Sanitizing
The recommended sanitizing solution is 1 ½ tsp (7.5ml) of household bleach in 2 quarts (21) of clean, cool water, mixed according to the recommended instructions on the bleach container. To sanitize, follow the below steps:

After performing the auto clean cycle as per the instructions above, add half of the recommended sanitizing solution (1 quart/11) to the jug. Secure the lid and inner lid and press CLEAN to run a sanitizing clean cycle.
Allow to stand for 1 minute, then empty solution.
To sanitize all the lids, personal blending cup, scraper and tamper soak them in 1 quart (11) of the sanitizing solution mixture for 2 minutes.
Place the empty jug and lid back on blender base and run on manual speed MIX for 10-20secs to remove any excess moisture from the blade area.
Wipe the exterior of the personal blender cup, lids,jug and base with a soft cloth dampened with the sanitizing solution.
Do not rinse after sanitizing. Allow to air dry before storage. Rinse with clean water prior to next use.

WARNING
Do not use the CLEAN function to sanitize your personal Blender Cup.

Motor base
To clean the motor base, wipe with a soft, damp cloth then dry thoroughly. Wipe any excess food particles from the power cord

Cleaning agents
Do not use abrasive scouring pads or cleaners on either the motor base or the jug, as they may scratch the surface. Use only warm soapy water with a soft cloth.

Dishwasher
The blender jug, personal blender cup, personal blender blade system, tamper, scraper and all lids can be washed in the dishwasher on a standard wash cycle. Jug can be placed on the bottom shell however the personal blender cup, personal blender blade system and all lids should be washed on the top shelf only.

Stubborn food stains and odors
Strong smelling foods such as garlic, fi.sh and some vegetables such as carrots may leave an odor or stain on the blender jug, personal blender cup and lids. To remove, soak blender jug and lids for 5 minutes in warm soapy water. Then wash with a mild detergent and warm water, rinse well and dry thoroughly. Store jug with the lid of£

Storage
Store your blender upright with the blender jug assembled on the motor base, or beside it. Store the personal blender cup with the blade system assembled. Do not place anything on top. To allow air to circulate, keep the lid off.

Dry milling
Please note that milling hard ingredients like spices, nuts, sugar, coffee, grains, etc. will cause scratching and clouding to the inside surfaces of the jug.
This is a cosmetic result from milling these kinds of ingredients, and does not affect the performance of the jug.