Shenzhen Mega-Whale Technology RM01 1-key 433MHz Remote Controller Instructions
- June 13, 2024
- Shenzhen Mega-Whale Technology
Table of Contents
Shenzhen Mega-Whale Technology RM01 1-key 433MHz Remote Controller
Product Information
The device is a remote controller that is compatible with all switcher products operating on a 433MHz frequency and other devices that support the 433MHz communication protocol.
Specifications
- Model: RF
- Power supply: N/A (battery-operated)
- Working current: N/A
- Operating temperature: N/A
- Product size: N/A
Product Usage Instructions
The remote controller is designed to control devices that support the 433MHz communication protocol. It can be used to turn on/off these devices.
Works with Devices:
- NS01 switcher
FCC Warning:
This device complies with Part 15 of the FCC Rules. To ensure proper operation, please adhere to the following:
- This device should not cause harmful interference.
- This device must accept any interference it receives, including interference that may cause undesired operation.
Note : Any changes or modifications made to this unit without express approval from the responsible party may void the user’s authority to operate the equipment.
Product Introduction
The device applies to all switcher products with 433MHz frequency and other
devices supporting the 433MHz communication protocol.
Specifications
| Model | 1-key 433MHz Remote Controller |
|---|---|
| RF | 433MHz |
Power supply
| 3V button cell x 1 (Battery model: CR2032)
Working current| 6mA
Operating temperature| 0°C-40°C
Product size| 50×13.5mm
How to use
Button is able to devices that support 433MHz communication protocol respectively, the on / off of these devices can be controlled by this remote controller.
Works with devices
- NS01 switcher
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2 : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>