ergotron 98-130-224 LX Arm Extension and Collar Kit User Guide
- June 9, 2024
- ERGOTRON
Table of Contents
ergotron 98-130-224 LX Arm Extension and Collar Kit
CAUTION! The LX Arm Accessory is designed to be used with the 45-295 LX Desk Mount LCD Arm, Tall Pole and the 45-509 LX Dual Stacking Arm, Tall pole products. Using the LX Arm Accessory with any other product may create an unstable situation resulting in equipment damage and/or personal injury.
Features & Specifications
Can have up to 4 arms on a pole when used with the 45-509 LX Dual Stacking
Arm, Tall pole
See updated maximum weight capacities:
Maximum monitor width will decrease depending on arm configuration.
Maximum monitor width will decrease depending on arm configuration.
Components
Tools Needed
Assembly
WARNING ADVERTENCIA AVERTISSEMENT|
---|---
WARNING! Stored Energy Hazard: The Riser mechanism is under tension and
will move up rapidly, on its own, as soon as attached equipment is removed.
For this reason, DO NOT remove equipment unless the Riser has been moved to
the highest position! Failure to follow this instruction may result in serious
personal injury and/or equipment damage!
CAUTION! The LX Arm Accessory is designed to be used only with the 45-295 LX Desk Mount LCD Arm, Tall Pole product, with a total of two (2) arms per pole. Using the LX Arm Accessory with any other product or in quantities greater than two (2) arms per pole may create an unstable situation resulting in equipment damage and/or personal injury.
NOTE: Leave enough slack in cable to allow full range of motion. &
Caution: To avoid the potential to pinch cables it is important to follow
the cable routing instructions in this manual. Failure to follow these
instructions may result in equipment damage or personal injury.
Adjustment Step
Important! You will need to adjust this product after installation is complete. Make sure all your equipment is properly installed on the product before attempting adjustments. This product should move smoothly and easily through the full range of motion and stay where you set it. If movements are too easy or difficult or if product does not stay in desired positions, follow the adjustment instructions to create smooth and easy movements. Depending on your product and the adjustment, it may take many turns to notice a difference. Any time equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum operation.
a Lift – Up and down
b Tilt – Forward and Backward
C Arm Swing – Side-to-side
D Rotate – Portrait/Landscape
Learn more about ergonomic computer use at: www.ergotron.com/ergonomic
NOTE: When contacting customer service, reference the serial number.
While Ergotron, Inc. makes every effort to provide accurate and complete information on the installation and use of its products, it will not be held liable for any editorial errors or omissions {including those made in the process of translation from English to another language), or for incidental, special or consequential damages of any nature resulting from furnishing this instruction and performance of equipment in connection with this instruction. Ergotron, Inc. reserves the right to make changes in the product design and/or product documentation without notification to its users. For the most current product information, or to know if this document is available in languages other than those herein, please contact Ergotron. No part of this publication may be reproduced, stored in a retrieval system,or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of Ergotron, Inc., 1181 Trapp Road, Eagan, Minnesota, 55121, USA Patents Pending and Patented U.S. & Foreign. Ergotron is a registered trademark of Ergotron, Inc.
CUSTOMER SUPPORT
For Warranty visit:
www.ergotron.com/warranty
For Service visit: www.ergotron.com
For local customer care phone numbers visit: http://contact.ergotron.com
www.ergotron.com I USA:
1-800-888-8458 I Europe: +31
(0)33-45 45 600 I China: 400-120-3051 I Japan:
japansupport@ergotron.com
© 2015 Ergotron, Inc. All rights reserved.
