Kinco GT150E2 Green Series HMI Touch User Manual
- June 9, 2024
- Kinco
Table of Contents
Kinco GT150E2 Green Series HMI Touch
Product Information
The GREEN Series HMI GT IOT GT150E2 is an industrial Human-Machine Interface (HMI) with the following features:
- Industrial grade CPU, 800MHz, 256M DDR3
- Industrial display15, high-definition display, 4:3 display scale
- Main board three-defence treatment and isolation of power and serial port to effectively deal with complex environment
- Up to 3 serial ports for different levels of requirements
- Sealing design of buckle for waterproof and oil resistance
- Built-in 1 USB Host, USB Host/serial port, 2*10/100M self-adaption, USB Slave(Micro USB)/U disk/Ethernet communication ports
- COM0:RS232/RS485/RS422; COM1:RS485/RS422; COM2:RS232 (Include sealing ring) communication ports
- DC10.8VDC28V,Built-in isolation power supply
- The HMI supports eight language versions of Chinese, Traditional Chinese, English, Korean, German, Russia, Arabic and Turkey. It also supports cloud monitoring and VNC interoperation between HMI and HMI, HMI and PC, mobile phones (or other terminals). The configuration design content supports all fonts installed in the computer system. It has a program download feature and supports convenient components such as installment, PDF browsing, and operating log records for designing guiding interface.
- The HMI has a 15 TFT display with a display area of 304.13mm (W) x 228.10mm (H). It has a resolution of 1024*768 pixels with 65536 colors. The display angle of view is 80/80/80/80 (left/right/up/down) and has a contrast ratio of 800:1. The backlight has a brightness of 420cd/m2 and a life of 50000 hours. It has a 4 line precision resistance network touch panel with surface hardness of 4H. The HMI is powered by an ARM RISC 32Bit 800MHz CPU and has a storage capacity of 256MB NAND Flash Memory+256MB DDR3 Memory. It also has a built-in Real-Time Clock (RTC) and supports extensible memory.
- The HMI has an insulation resistance and hi-pot test. It has a PCB shell material with a CE authentication and a panel protection grade. It operates in the temperature range of -10°C to +60°C and humidity range of 10% to 90% RH. It can be stored in the temperature range of -20°C to +70°C and humidity range of 10% to 90% RH. The HMI also undergoes sine vibration testing and has a cooling mode.
Product Usage Instructions
The GREEN Series HMI GT IOT GT150E2 is an industrial HMI that is suitable for various industrial applications where a reliable and robust interface is required. Follow the instructions below to use the product:
- Connect the power supply to the HMI within the recommended voltage range of DC10.8VDC28V.
- Connect the communication ports to the required devices using the appropriate cables and connectors.
- Install the Kinco DTools configuration software on your computer.
- Configure the HMI using the Kinco DTools software to suit your specific requirements.
- Monitor the HMI using cloud monitoring or VNC interoperation with other devices.
- Refer to the user manual for troubleshooting tips and maintenance procedures.
Product Features
GT150E2
- Industrial grade CPU, 800MHz, 256M DDR3;
- Industrial display：15″, high-definition display, 4:3 display scale;
- Main board three-defence treatment and isolation of power and serial port to effectively deal with complex environment;
- Up to 3 serial ports for different levels of requirements;
- Sealing design of buckle for waterproof and oil resistance.
Mechanical Dimensions
(Unit: mm)
PRODUCT SPECIFICATION
WEB
- www.en.kinco.cn
- Email: [email protected]
(All trademarks and logos are property of and registered by their respective owners.)
References
Read User Manual Online (PDF format)
Loading......