CITIZEN W510 Eco-Drive Riiiver Instruction Manual

CITIZEN W510 Eco-Drive Riiiver Instruction Manual

Thank you for your purchase of this Citizen watch. Before using the watch, read this instruction manual carefully to ensure correct use. After reading the manual, store it in a safe place for future reference. Be sure to visit the Citizen website at https://www.citizenwatch-global.com/ . Some models may be equipped with enhanced features functions such as slide rules and tachymeters. You can also see how to use such features and functions, which is not covered with the instruction manual, in the web site.

To check the movement number

A case number–4 alphanumeric characters and 6 or more alphanumeric characters–is engraved on the case back.

The first 4 characters of the case number represent the movement number of the watch.

Safety precautions — IMPORTANT

This manual contains instructions that should be strictly followed at all times not only for optimal use, but to prevent any injuries to yourself, other persons or property. We encourage you to read the entire booklet (especially, pages 11 and 12) and understand the meaning of the following symbols: Safety advisories are categorized and depicted in this manual as follows:

⚠ DANGER Highly likely to cause death or serious injury

⚠ WARNING Can cause serious injury or death

⚠ CAUTION Can or will cause minor or moderate injury or damage

Important instructions are categorized and depicted in this manual as follows: (Following symbols are examples of Pictograms.)

Warning (caution) symbol followed by prohibited matters.

Warning (caution) symbol followed by instructions that should be followed or precautions that should be observed.

Features

https://www.citizenwatch- global.com/support/
https://riiiver.com/

Before using this watch

This watch has a rechargeable cell which is charged by exposing the dial to light. Expose the dial to direct sunlight regularly to charge the watch. For details of charging, see page 8 -.

Connection with the smartphone

Use the dedicated app to connect the watch with your smartphone. Download an app compatible with your smartphone from an app store.

Band adjustment

We recommend seeking the assistance of an experienced watch technician for sizing of your watch. If adjustment is not done correctly, the bracelet may unexpectedly become detached leading to loss of your watch or injury (excluding products containing the band adjustment tool). Consult an authorized service center.

Protective stickers

Be sure to remove any protective stickers that may be on your watch (case back, band, clasp, etc.). Otherwise, perspiration or moisture may enter the gaps between the protective stickers and the parts, which may result in a skin rash and/or corrosion of the metal parts.

How to use a specially designed crown/button

Some models are equipped with a specially designed crown and/or push button to prevent accidental operation.

Screw down crown/button
Unlock the crown/button prior to operate your watch.

Recessed button
Press the button with a non-marring narrow-tipped object.

• Metal objects may cause marring or scratching of the button.

Component identification

• The illustrations in this instruction manual may differ from the actual appearance of your watch.
• A solar cell is placed under the dial.

Before connecting with a smartphone

This watch communicates with smartphones through Bluetooth Low Energy power- saving communication technology. You must install the dedicated app “CITIZEN EcoDrive W510” on your smartphone and start it to make pairing (registration) between the phone and the watch to connect them. The flow of connection is as follows.

• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
• Android is a registered trade mark of Google Inc.
• iOS is a name of an operating system of Apple Inc. IOS is a
  trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

Compatible smartphones

You can see information about compatible smartphones (compatible with Android OS 8.0/iOS 12.0 or newer) and the dedicated app at the link below.
https://www.citizenwatch-global.com/support/

Pairing (registering) the smartphone

Execute pairing at first when connecting the watch and your smartphone.

Before pairing

• Unique pairing information is saved on the watch and smartphone as pairing is executed.
• When you execute pairing anew on a watch which has pairing information, the existing information is removed and new one is saved.

Executing pairing

• For pairing, you have to operate both the watch and the smartphone.
• It takes about 5 seconds to pair the watch and the smartphone.

1. Download the dedicated app “CITIZEN Eco-Drive W510” at an app site and install it.

2. Start the dedicated app.
   • Keep the app screen displayed until pairing is finished.
   • If you have never logged in before, make an account on the login screen. After finishing initial settings after making an account, the pairing screen appears.

3. Press and release upper right button B and lower right button A at the same time.
   The second hand of the watch points “ACTIVATE” and pairing starts.
   When pairing finished successfully The second hand of the watch turns fully around twice and the watch and smartphone are connected.
   • When firmware update for the watch is available, apply it as soon as possible. You can execute firmware update using [My watch] on the menu screen.
   When pairing failed The watch emits alarm sound and its second hand points “RECONNECT” of the connection indication and stops.
   • Press any of the buttons of the watch to cancel the connection indication before you try pairing again.

Connection and disconnection

Connection and disconnection
After pairing, the status between the watch and smartphone is either “connected” or “disconnected”. This watch and the smartphone is not always connected. Connect them as required when using the watch or the dedicated app. They are automatically disconnected as using of iiidea was finished or sending and receiving of required information such as time information. · For “connection”, the dedicated app must be running on your smartphone (running
in the background is OK).

Connecting

1. Start the dedicated app.
2. Press and release upper right button B and lower right button A at the same time.
   The watch and the smartphone are connected.
   Disconnecting manually Set the crown to position 1 or 2.

About time reception

This watch receives time information from your smartphone at every connection and adjusts the time and calendar automatically. In addition, the watch makes temporary connection with the smartphone automatically once a day to adjust time and calendar even after disconnection when it is exposed with light after 3:00 AM on it (automatic time reception).

• Pairing with a smartphone is previously required for the automatic time reception.
• When the watch is saving power (page 8), the automatic time reception will start as the power save is cancelled.
• Automatic time information reception function does not work in the following cases:
  – When the crown is not at position 0.
  – Power reserve level of the watch is “0” (during insufficient charge warning).

Checking the power generation amount and power reserve

You can check the power generation amount and power reserve of the watch on the dedicated app. · Data of power generation and power reserve are stored in the watch for up to 2 weeks and removed from older one.

Checking power generation amount

• The power generation amount is indicated in the achievement level. The achievement level is percentage value when power generation amount required to charge power for 1-day running is supposed 100 %.
• You can check history of power generation amount in graphs and maps.

1. Start the dedicated app.

2. Press and release upper right button B and lower right button A at the same time.
   The watch and the smartphone are connected.

3. Display the screen of power generation amount.

4. Check information on the screen of power generation amount.

Checking the power reserve using the dedicated app

1. Start the dedicated app.

2. Press and release upper right button B and lower right button A at the same time.
   The watch and the smartphone are connected.

3. Tap the menu icon on the home screen of the dedicated app.

4. Tap [My watch].
   · The current power reserve level is indicated when the watch and the smartphone are connected.

5. Tap [Checking the log of the watch].
   The screen of power reserve and temperature of the watch is indicated.


Checking the power reserve on the watch

• Power reserve is indicated in 29 levels.

1. Press the lower right button A repeatedly to make the function hand indicate power reserve.

Indication of power reserve on the watch

Power reserve is indicated with the function hand in percentage.

• See the table of “Standard use with the smartphone” in “Specifications” for details such as usage conditions of “When using connection” of duration.
• Connection is disconnected when the power reserve becomes “0%”. However, basic functions of the watch are still available.
• Some basic functions become unavailable while the insufficient charge warning function is active.

Using the activity monitor

An acceleration sensor is equipped with this watch and your activity is automatically measured and the data are stored. When the watch and the smartphone are connected, the activity data are send to the smartphone. The data can be browsed and saved on the dedicated app. · The activity data are stored in the watch for 2 weeks and removed from older one.

1. Start the dedicated app.

2. Press and release upper right button B and lower right button A at the same time.
   The watch and the smartphone are connected.

3. Display the screen of activity monitor.

4. Check information on the screen of activity monitor.

• Software technologies provided by ACOS CO., LTD ( watch. ) are used on the activity monitor on this
• Activity amount indicated on the activity monitor may differ form the actual one depending on usage of the watch. Please use this table as a reference only.

Data of the activity monitor

To use the activity monitor correctly, it is required to enter personal data of your body (sex, height, weight and birth date). These data are stored in the watch and the app together with activity data (count of steps, calorie consumption, etc.). See “Remove the data stored in the watch” to remove the data above.

Check the internal temperature of the watch

A temperature sensor is equipped with this watch. When the watch and the smartphone are connected, data of temperature sensor are send to the smartphone. The data can be browsed on the dedicated app.

• The temperature indicated is that in the watch. It may be different from environmental temperature especially when you wear the watch. When you want to know environmental temperature, take off the watch and wait until the temperature in the watch goes near to environmental one.
• The temperature data measured are stored in the watch for 2 weeks and removed from older one.
• Temperature measurement result is indicated with about ±5 °C accuracy when environmental temperature is +5 °C – +35 °C. Please use this table as a reference only.
• The temperature unit used (°C/°F) follows the setting of the smartphone.

1. Start the dedicated app.

2. Press and release upper right button B and lower right button A at the same time.
   The watch and the smartphone are connected.

3. Tap the menu icon on the home screen of the dedicated app.

4. Tap [My watch].

5. Tap [Checking the log of the watch].
   The screen of power reserve and temperature of the watch is indicated.

6. Tap [°C (watch)] to switch indication to temperature of the watch.

Connection indication on the watch

When the connection status with the smartphone changed, the second hand points a connection indication of current status and stops.

• Connection indication is indicated only when the crown is in position 0. When the watch cannot indicate connection indication, indicating it is postponed until it can.
• The watch keeps correct time and calendar even while the second hand indicates connection indication.
• The “INFORMATION” indication may notify update of the dedicated app.

Connectable range
Connectable distance between the watch and the smartphone is up to about 10 m (33 feet). Connectable range may be shorter due to obstacles such as walls. Do not block the watch with your body such as by crossing your arms.

Cancelling the connection indication

The second hand does not indicate the second until you operate the watch to cancel connection indication.

• Previous cancelling of connection indication may be required for some operation.
• Cancelled connection indication cannot be shown again.

1.  Press and release any of the buttons while the second hand indicates connection indication.
   The connection indication is canceled and the second hand returns to normal movement. · Changing the position of the crown also cancels the connection indication.

Using iiidea

The dedicated app has 3 slots to register iiideas. You can add iiideas which have functions you want to the slots and operate them from the watch or show their indication on the watch.

• The conditions for use vary for each iiidea. By tapping the iiidea icon of the dedicated app, you can check them. For more information of iiidea, see the web site below:
  https://riiiver.com/

Changing iiidea

1. Start the dedicated app.

2. Press and release upper right button B and lower right button A at the same time.
   The watch and the smartphone are connected.

3. Press the lower right button A repeatedly to switch iiidea to what you want to use.

• Move the function hand so that it will point the slot of the iiidea you want to use.

• Slots which no iiideas are registered to on the dedicated app are skipped.

To stop using an iiidea
Press the lower right button A repeatedly to make the function hand indicate power reserve.

[My watch] screen

You can modify various settings on the [My watch] screen on the dedicated app.

• Some settings are not available without connection between the watch and the smartphone.

Removing the data stored in the dedicated app

Data stored in the cloud and the dedicated app on the smartphone can be removed from the setting screen of the app [Account setting] [Data deleting].

• See “Remove the data stored in the watch” when removing the data stored in the watch.

Turning the watch into the flight mode

You can deactivate the function to connect with a smartphone when required such as in a plane or a hospital.

1. Pull the crown out to position 1.
   The second hand shows the current setting of the flight mode (on/off).
   • If connected, connection with the smartphone is disconnected

2. Rotate the crown to change the setting of the flight mode.
   Off On: Rotate the crown clockwise.
   On Off: Rotate the crown counterclokwise.

3. Push the crown in to position 0 to finish the procedure.
   The watch returns to normal indication.

After turning off the flight mode setting
The connection function of the watch becomes available as the flight mode setting is turned off. Execute connection operation when you want to connect it with the smartphone. · Check the time and calendar of the watch and adjust them if required.

Charging your watch

This watch has a solar cell under the dial and stores the power generated by the cell in its built-in rechargeable cell. The cell is charged by exposing the dial to light such as direct sunlight or fluorescent lamps. For optimal performance, be sure to:

• Put the watch in a location where the dial is exposed to bright light such as by the window even when it is not used.
• Expose its dial to direct sunlight for 5 or 6 hours at least every week.
• Avoid leaving it in dark places for long periods of time.

CAUTION

• Do not charge the watch at a high temperature (about 60°C (140°F) or higher) as doing so may cause movement malfunction.
• If the watch is obscured from light by long sleeves frequently, supplemental charging may be needed to ensure continual operation.
• The watch stops charging automatically after finishing (overcharging prevention function). The function prevents damage to performance of the watch and rechargeable cell due to overcharging.

When the watch reaches a low charge state (insufficient charge warning

function)

When the power reserve becomes low, the second hand moves once every two seconds. This is the insufficient charge warning function. Be sure to fully charge your watch immediately as outlined below.

• When the watch is sufficiently charged, the second hand will move normally.
• If you do not charge the watch for 18 days or longer after the insufficient charge warning movement has begun, the watch will be depleted of all power and stop.

During the insufficient charge warning state
The time and date are indicated correctly.

Charging time by environment

Below are the approximate charging times when exposing to light continuously. Please use this table as a reference only.

• Exposing to direct sunlight is recommended to charge your watch. A fluorescent lamp or interior lighting does not have sufficient illumination to charge the rechargeable cell efficiently.

After charged fully, the watch runs without additional charging

• See the table of “Standard use with the smartphone” in “Specifications” for details such as usage conditions of “Using with a smartphone”.

Cautions when connected with a smartphone

• Frequent connection with a smartphone and frequent use of iiideas consume much amount of power. Charge the watch frequently.
• Take also care that your smartphone is charged enough.

Power save function

The second hand stop automatically at 0 seconds to save power when the dial of the watch has not been exposed to light for 30 minutes.

• However, automatic time reception is not executed while saving power.
• The power save function is not activated when the position of the crown is not 0.

Canceling the power save function
The power save status ends and the hands return to normal indication in the following cases:

• The dial is exposed to light and power generation starts.
• Activity is detected and measured through the acceleration sensor of the watch (when data of your body had already been registered).

After power saving of a long period of time, check the time and calendar of the watch and adjust them if required.

Adjusting the time and calendar manually

• If connected, connection with the smartphone is disconnected

1. Pull the crown out to position 2.
   The second hand points 15 seconds.

2. Press and hold the upper right button B for 2 seconds.
   The second hand points 0 seconds. · Release the button as the second hand points 0 seconds.

3. Press the lower right button A to change the target to correct.
   · Each time you press the lower right button A, the target changes as follows. Minute hour date year/month (back to the top)
   · The hands and indications slightly move when selected to show they become adjustable.

4. Rotate the crown to adjust the hand/indication.
   · Change of date indication shows it just became AM. Take care the time set is AM or PM.
   · The function hand moves synchronously with the date indication.
   · When you rotate the crown quickly a few times, the minute/hour hands and date indication will move continuously. To stop the rapid movement, rotate the crown in either direction.
   · Refer to “Month and year indications” to set the year and month.

5. Repeat steps 3 and 4.

6. Push the crown in to position 0 in accordance with a reliable time source to finish the procedure.

Month and year indications

Troubleshooting

Checking and correcting the reference position

You can check and adjust the reference position through the dedicated app. Connect the watch with the smartphone and tap [Help] [Troubleshooting] [Time and/or date is incorrect] from the menu screen of the dedicated app.

If the time or calendar is not shown correctly even after proper reception of the time info, check whether the reference position is correct.

• If the hands and indication do not reflect the correct reference position, the time and calendar will not be indicated accurately even if the time info is received.
• Be sure to check the current reference position and adjust it only when the position is not correct.

1. Pull the crown out to position 2.
   The second hand points 15 seconds.

2. Press and hold the lower right button A for 4 seconds or more.
   The hands and indication start to move to the current reference positions stored in memory.
   • Release the button as the hands/indication start to move.
   • Proceed to the next step after the hands/indication stop.

3. Check the reference positions of them referring to the illustration above.
   Correct Proceed to step 8 without adjusting the reference position.
   Wrong Proceed to step 4 and correct the reference position.

4. Press and release the lower right button A to start adjustment of the reference position.

5. Press and release the lower right button A repeatedly to change the hand/ indication to be corrected.
   • Each time you press the lower right button A, the target changes as follows. Function hand/date indication hour hand minute hand second hand (back to the top)
   • The hands slightly move when selected to show they become adjustable.

6. Rotate the crown to adjust the hand/indication.
   • The function hand and date indication move synchronously. Date indication changes to the next as the function hand rotates 5 times.
   • When adjusting the hour hand, the second and minute hands slightly escape left and right to provide clearer view of the hour hand.
   • When you rotate the crown quickly a few times, the hand/indication will move continuously. To stop the rapid movement, rotate the crown in either direction.

7. Repeat steps 5 and 6. 8 Push the crown in to position 0.
   The watch keeps to indicate the reference position.

8. Press and release the lower right button A to finish the procedure.

Symptom and remedies

Resetting the watch — All Reset

When the watch does not work properly, you can reset the time and calendar settings. If the power reserve is insufficient, charge the watch first.

Be sure to perform the following operations after All Reset.

1. Correct the reference positions.
   After All Reset, the watch is in the reference position adjustment mode. Refer to step 4 and after on page 9.

2. Adjust the time and calendar.
   Adjust the time and calendar manually (page 8) or by connecting with your smartphone.

1 Pull the crown out to position 2. 2 Press and hold the lower right button A and the upper right button B at the
same time for 4 seconds or more and release them.
As you release the buttons, the alarm sounds and all reset is executed.

Remove the data stored in the watch

Follow the steps below to delete all the data stored in the watch such as pairing information, personal data of your body, data of activity monitor, etc. and returns status of the watch to that when shipped.

1. Pull the crown out to position 1.
   The second hand stops pointing 0 seconds (flight mode off) or 30 seconds (flight mode on).

2. Press and hold the upper right button B for 4 seconds or more.
   The second hand widely swings left and right from the center (0 seconds) and data is removed. · Release the button when the second hand widely swings left and right.

Bluetooth 4.0 wireless technology

Regulatory concerning to Bluetooth (Areas where Bluetooth is available)

Use of the Bluetooth communication technology is not legally permitted in some countries or regions. Visit our web site below to confirm the list of countries where Bluetooth is legally available.
https://www.citizenwatch-global.com/support/

• Using this watch in a country where it is not permitted may be punished under its law.
• Communication using Bluetooth may be monitored intentionally or accidentally. Do not use this watch for important communication or any communication involving human lives.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.

Eco-Drive watch handling precautions